Nichia 219D flashlight now available: Folomov 18650S

vinte77 · 2018-10-17T22:35:27.000Z

So just to be clear, this is an e-switch in the tail?

bmengineer · 2018-10-17T22:53:19.000Z

vinte77:

So just to be clear, this is an e-switch in the tail?

Yeah I’d love to know how that works too.

bmengineer · 2018-10-18T02:35:07.000Z

Folomov was messaging me so I asked them, apparently it’s 3000 K

Agro · 2018-10-18T06:56:13.000Z

djozz:

BROODMASTER:

djozz:

We will see… It does motivate me to do this emitter test one of these days.

Great! I look forward to reading it.

It took a while before I found the led in my, ahem, “system”, and unfortunately it appears to be a 119D, so with the two-pad solder pattern instead of the common 3-pad XP pattern. So testing it will not give an accurate impression of the 219D. I guess I will have to rob the 219D from the Folomov light when it arrives then.

Maukka has said that he expected 119d to perform better.

djozz · 2018-10-18T07:39:00.000Z

Agro:

djozz:

BROODMASTER:

djozz:

We will see… It does motivate me to do this emitter test one of these days.

Great! I look forward to reading it.

It took a while before I found the led in my, ahem, “system”, and unfortunately it appears to be a 119D, so with the two-pad solder pattern instead of the common 3-pad XP pattern. So testing it will not give an accurate impression of the 219D. I guess I will have to rob the 219D from the Folomov light when it arrives then.

Maukka has said that he expected 119d to perform better.

Better or worse, it will be different so not really a measure of the 219D. I have one of Clemence’s super-boards for the 119 so I could test the 119D properly, but still I think that if the performance is outstanding, the 219D will be more popular than the 119D because it works on all the cheap DTP boards.

djozz · 2018-10-18T07:40:26.000Z

CRX:

And a nice front view of the emitter :innocent:
Can’t find one anywhere.

That I can do already, the front end of the 119D is identical to the 219D. Will make a pic tonight.

MascaratumB · 2018-10-18T15:01:13.000Z

The features of the tail switch left me intrigued as well
I’ll be looking for your review djozz :+1:

EDIT: BTW, the images of the driver on the page linked are equal to Jetbeam’s drivers on many of their flashlights specifications.
Was GB that made the “patch” of it, or will be Folomov using that driver?…

djozz · 2018-10-19T22:38:09.000Z

djozz:

CRX:

And a nice front view of the emitter :innocent:
Can’t find one anywhere.

That I can do already, the front end of the 119D is identical to the 219D. Will make a pic tonight.

Here’s pic of the 119D sample that I got from Clemence. Since there’s a code written on it I’m not entirely sure if this pic could be a 219D also.

CRX · 2018-10-19T23:14:01.000Z

Thanks friend
Now I just need a picture of the new Osram

Firelight2 · 2018-10-19T23:16:58.000Z

This light actually looks really nice. I also ordered one.

Cereal_killer · 2018-10-20T01:14:20.000Z

djozz:

snip…so it must work like the Tool AAA Ti…

Hows that?

A possible method to do it w/o the inner current path: it’s powered all the time and a circuit in the switch cuts power temporarily when the E-switch is pressed and the FW runs based off the length / number of power interrupts.

I miss my Nitecore D10 but now I can’t wait for the fw3a (this things m/o, whatever it may be, won’t compare with the inner current path method)!

djozz · 2018-10-20T10:56:41.000Z

The Tool Ti work with a supercap in the tailboard, that powers a FET and is slowly charged by the battery while the light is off (and while on as well I guess).

vinte77 · 2018-10-20T13:51:43.000Z

Is there any discount codes for this light?

djozz · 2018-10-20T15:10:09.000Z

vinte77:

Is there any discount codes for this light?

Not yet but I’m sure it shows up in the Gearbest deals at some point. To buy it at this moment is out of pure impatience and curiosity.

Nachtfeuerzeug · 2018-10-20T16:23:18.000Z

djozz:

vinte77:

Is there any discount codes for this light?

Not yet but I’m sure it shows up in the Gearbest deals at some point. To buy it at this moment is out of pure impatience and curiosity.

Hahahaha! There's no one like that around here!

Bkeepes · 2018-11-25T11:59:52.000Z

Hello everyone! This is my first post on BLF. I have viewed this forum many of times but never created an account until yesterday. I received this light a couple days ago and it has some nice features but for the LED itself it has some issues.

On turbo it has a horrible blue hot spot and on all other modes it has a dark center. I dont know if I just got a lemon but I figured I would share this issue. I already have plans to do an emitter swap if I can get the head apart. The bezel is not glued on I had it off yesterday. That’s one of the first things I checked lol.

djozz · 2018-11-25T12:14:30.000Z

Welcome to BLF Bkeepes!

It is a known issue, it seems that Folomov did not even check this new emitter out before deciding using it in a high current flashlight.

If you have the skills to do an emitter swap the fix is easy, there are many emitters that will do the job better than the 219D.

Bkeepes · 2018-11-25T15:39:35.000Z

Thanks for the welcome djozz! Yes I do have the skills to replace it and have a few Nichia 219c’s in my parts box that will make this much better. But I might use the XP-L HI 3C out in this one.

I do like the switch in this light though. I was skeptical at first with the tail e-switch but it is a good addition to my collection. Some stepless dimming would be pretty sweet though!

toddcshoe · 2018-11-25T23:38:22.000Z

I ordered one last night. At first I was not going to because of the awful 3000K tint. Then I though to myself, “Self, you have other emitters you can put in there stupid.” No need to have any hard feelings against the light just because I don’t like the tint. That’s a easy fix. Looking forward to checking it out.

Tom_E · 2018-12-06T16:46:30.000Z

I got 2 of these lights, 1 from Amazon, 1 from BG, both exhibit the bluish tint problem on turbo. One has a bezel I could hand loosen, so swapped to a 219C and now it does great, but still, I think, only about 600 lumens I measured (my readings are higher than ANSI).

The light is fairly unique with an e-switch in the tail, and no extra wiring needed.