NTG35 3V LED will be available for 1800K, 2700K, 4200K and 5000K

lightdecay · June 19, 2019, 4:40am

It would be great if a magnetic tail cap without the lanyard hole was also an option.

Also on my wish list: a 21700 tube.

alex64 · June 19, 2019, 4:45am

Has the latest version of Anduril from TK with the improved stepdown?

charwinger21 · June 19, 2019, 5:07am

I’m more excited for the dual stage lockout momentary (allowing for moon mode while in lockout by holding, and ~60 lumens while in lockout by double tapping and holding).

It’s still low enough that it won’t cause any major problems (beside battery drain), it’s unlikely to activate in your pocket, and it is bright enough to be useful.

Fingers crossed. TK messaged Hank about it 2 weeks ago when Anduril launched on the original D4 (that one was using one build version too early for dual brightness lockout momentary).

Ratus · June 19, 2019, 4:57am

So each light has all the aux colors?

I’m thinking that “main LED tint x 7 aux color x 3 body colors” would be way too many sku’s for anyone to stock.

xevious · June 19, 2019, 4:59am

Color me impressed. I’d passed over the D4 before… now, subscribed.

How about a limited run with trit slots on the body and cap?

charwinger21 · June 19, 2019, 5:45am

I’m guessing it means “pick your aux LED colour when ordering, and then the settings for that one colour of aux LEDs are configurable on the light”, but I could be wrong.

edit: looks like I was wrong.

Hank_Wang · June 19, 2019, 5:31am

Each light has all the colors, you can choose any color by any time through ui.

charwinger21 · June 19, 2019, 5:33am

Colour me pleasantly surprised.

Hank_Wang · June 19, 2019, 5:33am

The only size difference is the tailcap, which is 3mm longer than then D4V1 tailcap, due to the magnet space.

Hank_Wang · June 19, 2019, 5:34am

It’s with the latest anduril ui from TK.

Hank_Wang · June 19, 2019, 5:36am

Most likely, it should be compatiable, but we are not able to 100% sure since there are many different batches for the D4V1.

charwinger21 · June 19, 2019, 5:43am

TK updates it so quickly that it’s hard to tell what the latest is

Personally, I’m looking for at least version 420 from 2019-05-22, but I think the improved stepdown was merged two or three versions after that (and to my knowledge, the latest is revision 428 on 2019-06-02).

edit: and here is a more readable changelog.

Firelight2 · June 19, 2019, 5:49am

Awesome that V2 is coming! Can’t wait!!!

MKayze · June 19, 2019, 5:49am

I haven’t even received my latest D4 yet and this comes out…

zak.wilson · June 19, 2019, 5:50am

And 424 offers manual memory, which I find to be a huge improvement. Prior to 427, that has to be enabled at compile-time, but it’s the default now.

sukanta · June 19, 2019, 5:56am

Excited to buy…

Satan · June 19, 2019, 6:05am

Hank are you have any plan for 21700 in your product ?

Hank_Wang · June 19, 2019, 6:13am

Yes, sure, it’s under developing.

KevinZA1988 · June 19, 2019, 6:14am

Looks great… But I wish it had higher regulated current. I would rather have a 4mm longer light to accomodate 6 more AMC 7135 chips on the cell’s side of the driver, like the FW3A. 750+ lumens vs only 150 lumens regulated current.

I’ll pass on this one.

KevinZA1988 · June 19, 2019, 6:16am

Please let this one have a FET+6+1 driver or something in that range?