Hi guys, been reading a lot here lately but now I took the time to register to get some insight on this issue I have - I have ordered a new Warsun X60 on ebay and I recieved a ET26 instead.
Now, this wouldn’t be a HUGE issue, as they look pretty much identical and I don’t care about the mobile charging thing anyway, but I have other issue with it.
I am now looking at the LED and it seems VERY VERY small. It’s visibly smaller than on my cheap Ultrafire XML-T6.
Measured the current at the tail and I get only 800 mA compared to the Ulrafire T6 which has 1000 mA sharp.
Both measurements were made using multiple fully-charged 18650 batteries I have lying around harvested from old laptop batteries ( several Samsungs and Sony ).
Tried both torches outside tonight. It is a bit foggy, but I could tell the Warsun threw further than the Ultrafire on tight zoom. Also the light output is more blueish on the Ultrafire and this is more of a warmer/natural white.
I used the Ultrafire on my bike so wide performance is important. Here the Warson loses to the Ultrafire ( when used on the wide setting of course ).
Anyway all in all, I am not very happy with purchase because I have a feeling something is not right with that tiny bulb in there ( maybe the seller swapped the original ?? ).
Not to mention they sent me a wrong plastic tube - this is a lot bigger than the 18650 - won’t fit in the torch and looks like
What the hell did I receive ?
Here is a link to some photos - maybe one of you guys can figure out what’s the type of that LED:
https://picasaweb.google.com/103164952044402035615/Warsun?authuser=0&authkey=Gv1sRgCJuN0aLQ79b—QE&feat=directlink
