Please someone mod this, overseas lights keep getting crazier

mountainair26 · 2019-03-17T23:27:03.000Z

Wow, I can’t wait to hear your impressions and see what a mod would look like. Keep us posted please!

LouieAtienza · 2019-03-18T03:19:22.000Z

johny723:

a good host for a CFT 90 emitter.

If it’s not built like a tin can…

WTF · 2019-03-18T03:31:09.000Z

johny723:

a good host for a CFT 90 emitter.

I was thinking mp3 player and a small subwoofer.

Then flash the driver with Anduril and run the light in candle mode.

Vegas_LED_Fan · 2019-03-18T16:08:26.000Z

This will probably start a flame war but I have a different outlook on this light. I am an avid DIYer when it comes to LED lights in my home but have never modified a flashlight. Why would anyone spend $200 on this over-hyped flashlight and then turn around and spend a bunch more on trying to make it meet your needs? It’s obviously just a big case with a slightly better than average LED. Wouldn’t it make more sense to spend those $200 on one from a trusted flashlight manufacturer who puts out an honest description of the light? BTW, if you can’t trust the specs, why do you think the picture of the light in actual operation isn’t just as phony?

DB_Custom · 2019-03-18T16:09:48.000Z

FWIW
My X6 with 9V MT-G2 does 4657 lumens with 3 Samsung 30Q cells, tail current shows 9.9A. Forward Voltage should be in the 11.xxV range.

LouieAtienza · 2019-03-18T16:22:56.000Z

DB Custom:

FWIW
My X6 with 9V MT-G2 does 4657 lumens with 3 Samsung 30Q cells, tail current shows 9.9A. Forward Voltage should be in the 11.xxV range.

Sure… but as the description says, 8.4V… It’d be a miracle if this had Samsung batteries in it. I think if I had to take a $200 roll of the dice I’d rather do it in AC or Vegas than with an international eBay vendor.

DB_Custom · 2019-03-18T16:31:51.000Z

8.4V to a 9V or 36V emitter would require a Boost driver. Doable, I have no idea what their set up is I just know the MG-G2 does indeed show capability of coming close to the advertised 5000 lumens, certainly not at 20W though.

I mod virtually every light, $800, $400 or $12, so I only see the potential for what I might be able to do with it not what it is in current form. Some 600 builds behind me gives me that perspective I guess. I wouldn’t buy this light for a number of reasons, but I love the MT-G2 and have quite a few, so I know what the emitter can do and what it looks like doing it. Throw, not likely, the surface is way too large with it’s array of 84 small dies….

ImA4Wheelr · 2019-03-18T16:37:24.000Z

Vegas LED Fan:

This will probably start a flame war but I have a different outlook on this light. I am an avid DIYer when it comes to LED lights in my home but have never modified a flashlight. Why would anyone spend $200 on this over-hyped flashlight and then turn around and spend a bunch more on trying to make it meet your needs? It’s obviously just a big case with a slightly better than average LED. Wouldn’t it make more sense to spend those $200 on one from a trusted flashlight manufacturer who puts out an honest description of the light? BTW, if you can’t trust the specs, why do you think the picture of the light in actual operation isn’t just as phony?

If the reflector and host are good quality, $200 would be a fair price regardless of emitter and accompanying electronics. Size matters when it comes to throw, heat dissipation, and energy storage. This light might have the potential to be a real winner for folks that like to mod throwers. Of course, more than size is needed. Quality materials, machining, and design are still unknown.

DB_Custom · 2019-03-18T16:39:28.000Z

Judging by the flat base around the MT-G2 the reflector is much too shallow to be a good thrower. Lot of variables in play of course, but look at what Vestureofblood did with a GT, by putting a large COB in it he did increase the output considerably but throw suffered greatly as well because of the much larger die surface. Still a very neat light, so this one may have potential for a lot of people. Price does seem rather high, would like to see inside it…

Tom_E · 2019-03-18T16:42:40.000Z

Vegas LED Fan:

This will probably start a flame war but I have a different outlook on this light. I am an avid DIYer when it comes to LED lights in my home but have never modified a flashlight. Why would anyone spend $200 on this over-hyped flashlight and then turn around and spend a bunch more on trying to make it meet your needs? It’s obviously just a big case with a slightly better than average LED. Wouldn’t it make more sense to spend those $200 on one from a trusted flashlight manufacturer who puts out an honest description of the light? BTW, if you can’t trust the specs, why do you think the picture of the light in actual operation isn’t just as phony?

Some might pay that just for the reflector. It's a gamble, but to get a reflector that large already built into a host is very unique and uncommon. I'd assume the batteries are in some sort of pack configuration - this is all part of the risk factors, but hopefully it's in a usable state, or can be easily modded to support the voltage a custom driver can work with. If it's a 6V MT-G2, at least to do a simple LED swap, maybe a sliced XHP70.2 or XHP50.2 might be the best option - we don't have a real thrower 6V LED, least I think.

DB_Custom · 2019-03-18T16:48:00.000Z

26,000 mAh battery pack might indicate 6 Basen cells, 4300 mAh x 6 comes close to that claimed 26,000 mAh capacity.

The light just looks cheaply made, I wouldn’t trust the charging system, would much prefer a considerably deeper reflector, just can’t see the price that high for what they’re showing us…

LouieAtienza · 2019-03-18T16:55:49.000Z

I think if you wanted a large reflector, you could buy a 300mm Lightforce reflector for about a quarter the price of this light. But thinking about what Dale mentioned - this would probably make an awesome CoB light! Would be a great form factor for some outdoor photography/videography, especially if you can mount it on a tripod.

The focal plane on the BLF GT is pretty big too, at least big enough for a 35mm diameter COB!

Scallywag · 2019-03-18T19:46:04.000Z

I'm betting on a plastic reflector.

ImA4Wheelr · 2019-03-18T21:29:34.000Z

Scallywag:

I'm betting on a plastic reflector.

Appears to be stamped aluminum, but it will be nice if turns out to be plastic.

mountainair26 · 2019-03-29T04:37:32.000Z

Well, I found and even more ridiculous one, orange with a leopard/tiger handle. It looks like it might be less crappy though somehow. Maybe not:

Orange crazy person light from AliExp

mountainair26 · 2019-03-29T04:42:48.000Z

I like how the giant light is mounted on bike handlebars. I bet that makes steering easy.

In case that one wasn't cumbersome enough for you:

https://www.aliexpress.com/item/led-flashlight-cree-xhp50-mtg2-Lamp-Direct-charging-Shock-Resistant-Self-Defense-Power-Bank-Table-lamp/32920997877.html?spm=2114.10010108.1000013.1.3c091f1duydsUq&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.90158.0&scm_id=1007.13339.90158.0&scm-url=1007.13339.90158.0&pvid=162e0daf-f7dc-49f0-86b3-58e94889f51d

mountainair26 · 2019-04-25T10:08:46.000Z

warzi975, Did you ever receive the light? Any impressions? Thanks

warzi1975 · 2019-04-25T10:29:54.000Z

Yes I have it. Not worth the money. Cheap reflector, small battery pack and thin alloy case. The LED is really genius but not hard driven. There is no real driver in it, only a few resistors on a small circuit.
I’m really disappointed.

Robert

wle · 2019-04-25T11:33:59.000Z

3 whole modes
—Mode Arrangement: High Light —~~Weak Light —~~ Strobe

26000 mah
—how many cells?

Attack Head/Spikes
—where is that?

—yeah it is silly, and the price is silly

BlueSwordM · 2019-04-25T14:24:07.000Z

Oof.

Plastic reflector I guess?