Thank you for your reply .
Please also clear me about the best cells and charger for stl .
I read in a forum that stl v6 becomes hot very fast while it is in full powe . As you own the flash light you would better know it .
Im also read that fenix tk41 & 60 are almost the same . Few say th
t 60 is the d cell version of 41 .
Oneday I wish to buy one either 41 or 60 or tk 70 ( but its too large ).
It will heat up but you can run it full blast without worrying.
I agree.
I could tell you to just buy an Olight M3x if you want a perfect beam thrower with a little more lux. But you can buy 2 STL-V6’s for that and that would be the better deal in my opinion. The STL-V6 is just hard to beat for throw and value.
Well then tell me about the best cells and chager for it .
there appears to be a TK70 which MAY run on 18650s, which has yet to come out officially for sale.
Based on the head dimensions and it’s DRY driver, 2100 has estimated it’s output to be at 2600 lumens @ 120k lux.
this is probably what you want to get now. It will blow EVERYTHING out the water (except of course the tk70).
For good 18650s I recommend panasonics NCR18650As (3100mAh), and trustfire flames (2400mAh), get the protected cell version.
And get the nitecore intellicharger i4, it’s a 4 bay charger which can charger LiIon and NiMH batteries.