Rofis R-series emitter swap?

aswang · 2019-06-04T03:53:33.000Z

Anybody managed to swap emitters with the rofis r-series rotating head light? I got an r1 and I really like this light except for the horrible greenish xml2 cool white emitter. Can’t seem to unscrew bezel with mousepad method but want to make sure it’s really press fitted before I pull out the knife.

bmengineer · 2019-06-04T04:02:31.000Z

The bezel on my R3 is press fit, but came out very easily with a knife blade.

aswang · 2019-06-04T04:04:47.000Z

bmengineer:

The bezel on my R3 is press fit, but came out very easily with a knife blade.

Thanks!! Will try later.

bmengineer · 2019-06-04T04:07:47.000Z

aswang:

bmengineer:

The bezel on my R3 is press fit, but came out very easily with a knife blade.

Thanks!! Will try later.

Note that you’ll probably need a new MPCB too, not much fits in the existing footprint.

aswang · 2019-06-04T06:28:07.000Z

bmengineer:

aswang:

bmengineer:

The bezel on my R3 is press fit, but came out very easily with a knife blade.

Thanks!! Will try later.

Note that you’ll probably need a new MPCB too, not much fits in the existing footprint.

Well that was easy. Swapped in SST-20 3000K on KD board and put in DCFix. That’s more like it!!! Thanks for the tips.