Which convoy S2+ x8 x6 x4 or SST40 or SFT40 or other could be leveraged to make a 3 led mod?
It is to not buy a new Driver and use the 5A of the SST40 or the 4x 6x 8x SST20 It is cheaper to buy the complete S2+ than to buy just the host.
Thanks.
Which convoy S2+ x8 x6 x4 or SST40 or SFT40 or other could be leveraged to make a 3 led mod?
It is to not buy a new Driver and use the 5A of the SST40 or the 4x 6x 8x SST20 It is cheaper to buy the complete S2+ than to buy just the host.
Thanks.
A 5A driver would be more suitable for a Triple build.
The S2+ variants that come standard with a 5A driver include the following:
LH351D
KW CSLNM1.TG(aka W1)
SST40
SFT40
519A
Perfect!
It’s cheaper to buy the complete S2+ and just add the leds and the tir.
Thank you.
You might check out the S21D. I know, no SST/SFT 40 leds. But the 519A in the quad configuration makes a nice light.
Don’t expect a great deal of throw. But you can buy a 4 pack of the different optics for cheap to modify the beam to your liking. I just mention it because the S21D is one of my favorite Convoy lights. Great little lights for short to medium ranges.
BTW, If you do try one, I would go for the 8A Constant Current driver. I also have the 12A FET model. Not a significant difference in top end brightness. But the difference in heat and runtime in regulated mode is.
In one thread you mentioned heat. Well the S21D will get quite hot on 100%. But I am pretty sure that an S2+ with triple SST/SFT 40s will also get hot. Maybe too hot for the small host. (though I do not have direct experience with the S2+ in that configuration)
Just a few thoughts for you…
Don’t forget the Spacer!
Ok I’ll see how it is, what I’m looking for is a small triple flood made by me.
Thanks
That piece of aluminum that fits into the pill?
Too bad I sold my lathe, it’s easy to do, I still have aluminum bars, in a few minutes I would have turned it, not because of the price, but rather because I did it myself.
I found the parts on a US website but not in the EU, maybe Simon has spare parts or maybe he has one built, although I would like to take advantage of one and assemble it, I have the tools.
I understand that any S2+ that carries the 5A driver would be the base for the project.
Thanks.
You can get an already built S2+ triple from kaidomain but with their own driver. Haven’t tried it.
USA or EU?
Now for the Euro zone, Chinese or European is better.
USA to Europe, they charge a lot of tariffs when passing through customs.
Do you have any links to that? I’ve searched their website and couldn’t find it. I’ve looking for a triple s2+
Nice! From AliExpress. I was looking at kaidomain.com. Thanks!
Kaidomain is in China
Simon doesn’t sell S2+ Triples
Check with @Chatika_vas_Paus they are in Poland and had some Copper S2+ Triple Spacers recently.
Thank you! I am looking for the parts.
Thanks I like them but they are complete, but I keep it the price is very good!
Thanks!
I thought I saw one in Tan or was it the S21D.