S21E 8.5amp Fet Anduril 1 driver reflashed to Anduril 2

I’ve got a couple S21E Anduril 1 drivers and finally decided to reflash one of them.
@SuperWilli put this on my radar a couple months ago in another thread.

I downloaded a streamlined hex file for the mateminco-mt35-mini.

Space is pretty tight on the stock driver for the SOIC-8 clip to fit properly, so I desoldered the switch and emitter wires.

Much better.

No need to flash fuses as they are already programmed to the stock driver.
I set my usbasp adapter to 3.3v and no issues with flashing firmware in avrdude.

Hooked it up and all works good.
I built up this S21E with an FFL5009R 5000k 3v emitter.

I think I’ll eventually compile my own version, as this one is missing tactical modes and I’d much rather delete other features instead.

Enhanced glamor shot.

8 Thanks

Awesome, nice guide for anyone else interested. Mine has been working flawlessly for the last couple months. This makes the S21E even more appealing in my opinion.

5 Thanks

Thanks! Cheers to you for putting the bug in my ear. I probably wouldn’t have thought of it if I didn’t see your post about it.
I should have also mentioned I changed my usbasp dongle to 3.3v like you suggested. I usually use 5v for most chip flashings.

100% agree.

3 Thanks