S41s head and extension tube mismatch

toddcshoe · 2018-07-07T22:52:59.000Z

Have a Sofirn or Thorfire tube to try? I don’t have a S41S yet but I have one on the way.

Zulumoose · 2018-07-14T09:01:51.000Z

So I finally got around to submitting a claim with Banggood for the S41s with tubes that don’t fit properly. I can’t see how I can submit a video though, I use Imgur and it doesn’t seem to accept video. Can anyone enlighten me?

Meanwhile these are the measurements of the thread areas, it seems the threads inside the head are flattened out, which is probably what is causing the problem.

inside head 21.7mm
outside 18350 tube 21.75mm
outside 18650 tube 21.7mm

Looks like even the tube that fits is only holding on by 1/20 of a millimetre, not good!

duramax · 2018-07-14T09:14:27.000Z

you can use youtube to share videos. I have seen defective Gearbest and Banggood items on there for their respective CS teams.

kiriba-ru · 2018-07-16T09:13:15.000Z

Use convoy if you want to swap parts made different time. Astrolux can involve changes when they want.
Upd.

ENEDED BLF User Negotiated Deals

I have realized that s41s is too heavy for edc and tail knurling is too agressive so I started to swap parts. I have black astrolux s1 with 18350 and 18650 tubes and s41s with short tube. (All from banggood). I wonder but all threads are different. S41S short SS tube have 21.8mm threads OD. Cant enter S1 internals. S1 short tube fits s41s but threads OD is 21.6mm. S1 long tube goes trought threads in s41s head and tail because threads OD is just 21.3mm. Im not saying about length difference…

d_t_a · 2018-07-14T11:50:40.000Z

I’ve got an Astrolux S41S (quad-Nichia 219B), but I didn’t buy the S41S 18650 tube. Instead, I’ve been using the 18650 tube from an Astrolux S1 (and the Astrolux S1 is now using the included 18350 tube). So my S41S is mismatched colors, but it works…

ImA4Wheelr · 2018-07-14T11:54:36.000Z

Not pretty, but some of the Ultrafire and some generic 501's and 502's fit and work.

Henk4U2 · 2018-07-14T12:33:11.000Z

Can you see if both tubes have threads that interlock?
Better said: are pitch/threads per inch the same?
Does it look like this?

Zulumoose · 2018-07-14T12:47:50.000Z

Henk4U2:

Can you see if both tubes have threads that interlock?
Better said: are pitch/threads per inch the same?
Does it look like this?

Yes they mesh like that, diameter is the issue. Just checked against an A6 as well, should have thought of that earlier, both the S41 tubes fit the A6 head perfectly, but the A6 tube also pushes into the S41 copper head without screwing it in. It’s definitely the copper head that is either machined too far or has crushed threads.

Macka17 · 2018-07-14T13:24:50.000Z

Hi
I got my S41 coupla days ago. with separate red (weird hey??)
but red colour burnt 1\2 way down and black drawn out of tail piece.
should look “different”.

I thought mine didn’t fit too. But tube fits only one way.
and you have to push it DEEP into head b4 threads bite.
SHORT thread fits into head.
long thread with smooth collar fits onto rear sect.

And I just greased my threads and caught a blast of light when testing sw.
Damn. that’s bright. Close range I can’t see these keys hardly.
That’ll teach me. DON’T look at them. even sideways when testing sw.
These things blast it out.

Zulumoose · 2018-07-16T07:51:00.000Z

Ok I got a response from Banggood requesting a video so I uploaded to Youtube and sent them the link.

It will be interesting to see their response. I also told them that the battery tubes both fit an A6 head, which is an Astrolux S1, so it is definitely the head that is the problem, and I have told them they can just send the copper section if they want as I can swap out the components. I think that is the best solution as the cost is negligible and solves the problem completely. As long as they test first with other battery tubes, and don’t send another one from a faulty batch.

toddcshoe · 2018-07-16T08:00:59.000Z

Hope BG takes care of you. It shouldn’t cost you any more funds to fix a faulty product.

Zulumoose · 2018-07-18T11:56:52.000Z

Unbelievable, they still don’t understand the problem, after I sent them the video and this text :-

I have also tried the fit with a BLF A6 (same as Astrolux S1) and both the S41S battery tubes fit the head of the A6 perfectly, so it is definitely the head that is a problem.

I am able to swap the components so if you send just the copper section it will be fine, but please check the fit with other battery tubes before sending

their response is this

We will arrange a Astrolux S41S Silver 18650 Flashlight Tube to you, would you accept it?

RobertB · 2018-07-18T13:56:07.000Z

Looks like the 650 tube was machined wrong to me, since the 350 tube is ok. Calipers to measure the diameters?

Zulumoose · 2018-07-18T14:00:26.000Z

RobertB:

Looks like the 650 tube was machined wrong to me, since the 350 tube is ok. Calipers to measure the diameters?

See post #3

inside head 21.7mm
outside 18350 tube 21.75mm
outside 18650 tube 21.7mm

Looks like even the tube that fits is only holding on by 1/20 of a millimetre, not good!

RobertB · 2018-07-18T14:58:44.000Z

Zulumoose:

RobertB:

Looks like the 650 tube was machined wrong to me, since the 350 tube is ok. Calipers to measure the diameters?

See post #3

inside head 21.7mm
outside 18350 tube 21.75mm
outside 18650 tube 21.7mm

Looks like even the tube that fits is only holding on by 1/20 of a millimetre, not good!

I have both of the aluminum versions and they fit well.

The head ID of mine are 21.22mm (350 head) and 21.27mm (650 head)

OD on the 350 tube is 21.75, and 21.85 on the 650 tube.

Zulumoose · 2018-07-18T15:59:01.000Z

So you have roughly 10 times the thread overlap that I have.

0.53mm on the 350
0.58mm on the 650

I have

0.05 on the 350
0.00 on the 650

RobertB · 2018-07-18T16:14:20.000Z

Zulumoose:

So you have roughly 10 times the thread overlap that I have.

0.53mm on the 350
0.58mm on the 650

I have

0.05 on the 350
0.00 on the 650

Yup, looks like you’re right. Badly machined head. I would try one more time to contact them. Keep it simple, they don’t speak very good english. “Tubes good, bad head. Need new copper head”. From your video, it just looks like the 650 tube is bad. They won’t understand a long winded response. Maybe shoot another video, but leave out the 350 tube

Zulumoose · 2018-07-19T06:40:15.000Z

Ok they again offered to send a tube.

So I sent them this

The copper HEAD is the problem.

I have 4 tubes and 3 heads, see attached photo with measurements.

And I have evidence of 2 more, see post #16 from BudgetLightForum S41s head and extension tube mismatch

I have attached a picture of that post

All of the tubes will fit the other heads, with a good overlap for thread grip.

NONE of the tubes will grip My S41S head well, even my 18350 tube only holds on by 0.05mm

If you send another tube it will be the same size as all the others, around 21.7mm, which will not grip my head.

The head is supposed to be between 21.2mm and 21.4mm, like all the others.

Photo I attached :-

I don’t know why the photo shows upside down, it is the right way up on my PC thumbnail and when I open it, but saves upside down on Imgur, I haven’t run into this problem before.

RobertB · 2018-07-19T11:29:05.000Z

File a paypal dispute, maybe they will escalate it to someone who speaks English. Don’t close dispute until you get a new head, new light, or refund.

Customer service person is probably thinking, “why he show picture of wrong flashlight”, not understanding the problem

Henk4U2 · 2018-07-19T12:26:42.000Z

Hmm…… maybe the customer service person is thinking:
If the customer knows that I understand the issue at hand, he also knows that I have to admit he’s right.