Shadow TC300_CK: MT-G2, 20DD driver @ 10+A, 3300Lm petite monster

Buy / Sell Want to Sell
1

LOL apparently spell check doesn't work in the title field.

This is one of my personal favorites, I've been keeping it awhile as my own light but time to mix it up with something new so here it goes...

This is my Shadow TC300 MT-G2, its a nice brown color, the pill was filled with copper rounds soldered together into a solid slug, I dont have before measurements but it was very light (its a small pill), it ended up at 80g with all the copper added. The MT20 is filed down to fit and it has a BLF 20dd driver, it runs at 10.38A* to the emitter and does 3,300 lumens! it powers out 32kCd but is a major flooder. If I end up keeping it the ONLY change I will make is adding an AR lens but its more than good enough now.The UI is STAR Off-time and has 4 modes:

Low= 88Lm

Med=240Lm

High= 1086Lm

Turbo= 3302*Lm there is a turbo step down but I forget the time and level it steps down to (it may be high, it may be something specific PWM level)

*on high drain cells such as samsung 25R's or sony VTC5's.

For this one I'm looking for $70 shipped however for just $5 more I will include a pair of high drain cells capable of the full 10A draw (either a set of LG or Samsung 4.2v IMR's).

business end (prints on the outside, I just checked)

Here's a 60yd beamshot

and heres a shot inside a 8' tunnel

2

Nice :slight_smile:

3

awesome light, awesome price!

4

Poor dog, I think I see smoke coming off its fur.

5

That must be a really tiny dog if that tunnel is 8' long.

6

Lol no he’s a huge dog (about 90lbs), the tunnel is 8’ diameter!

7

Bump, giving this one till tomorrow, at that point it’ll remain listed FS but I’m gonna crack it back open and flash it to 5 modes and lower the turbo timer to 30-45 sec to make it a little safer to hand to muggles- “what my hand is burning, can’t be the super bright flashlight, no need to turn it down or anything”.

So anyway if anyone’s considering the light but wish it had a different FW that’s no problem, I’ll put anythng on it you want just please speak up now so I don’t have to take it apart yet another time, the driver has to be soldered in and its kind’a a pain to get to.