Shorten your 7135s for space-constrained mods!

I torched one of the raptor claw 7135s to see what that would look like. This is the best picture I managed to take:

It is possible to take ~.25mm off of the bottom of the 7135, and also to shave the sides flush with the legs, if not slightly more. The total height can be .85mm, and the width, 3.4mm, from outside pin to outside pin. It is possible to put a whole lot more than 8 of them on a 17mm board. More than 12. More than 16. More than 20. More than 32!