Sofirn would like to know preferred UI for XHP70, 3x18650 light!

djozz · 2018-05-18T14:33:30.000Z

Like many, I came to like ramping a lot, and if it is done well I have no need for fixed modes as well. But the ramping must be fast enough, the only ramping lights I know that have a good smooth ramp are the BLF-lights with Narsil, and the Emisar D4 (thank you TomE for that!). All attempts by others at a ramping UI fail bigtime by slowing it down (Thorfire, Zanflare).

Nicolicous · 2018-05-18T14:48:35.000Z

i vote for 1) Ramping with memory but the speed of ramping should be same as narsil (not slow and not fast )

MascaratumB · 2018-05-18T14:49:21.000Z

Hi Matt!

Some months ago, Sofirn also asked for some suggestions for a forthcoming light, the K6.

Back then, people gave their suggestions, including for the UI. You can find some things on this post the UI section, in case you find it useful!

If I was to say something about the UI for this new light of Sofirn, I would say that if they opt for ramping…it has to be much improved, as djozz mentioned.

Their SP32A was later improved, but when we see the Emisar D4 and lights use Narsil and other well done ramping modes, Sofirn will have to step up and make a really nice one as well.

Also, looking at the Emisar D4 (I don’t have any with Narsil), we can use ramping with and without memory, so that would be my preference (with a quick access to the lowest mode and to turbo, of course ).

Good luck on this And…it is always good to see Sofirn in close contact with the community

Jerommel · 2018-05-18T14:55:29.000Z

up and down button.

the4ds9 · 2018-05-18T16:43:20.000Z

I prefer the UI on the original Thrunite TN36. I don’t like to keep the button held down for too long as it makes me feel like I don’t want to turn the button spring into a weak point.

mattlward · 2018-05-18T17:48:38.000Z

Not familiar with that one… what… press to start and stop ramping?

Agro · 2018-05-18T18:12:41.000Z

For me it’s 2), ramping without memory. With default being ML.

Anthon · 2018-05-18T19:14:00.000Z

Please:

From OFF:
Single click for last used mode
Double click for turbo
Triple click for strobe
Long click for moonlight

From ON:
Single click for OFF
Double click for turbo
Triple clicl for strobe
Keep pressed the button to start cycling trough modes, release the swith to stay in the desired mode

Avoid long clicks for turning ON/OFF

bmengineer · 2018-05-18T20:06:32.000Z

Most springs are made of steel, which has very good memory and won’t ‘learn’ a new shape by being held there too long, unlike elastic materials like rubber. Steel is actually more likely to degrade by cycling more presses.

LichtAn · 2018-05-18T20:11:53.000Z

I can’t be the only person in the world hating ramping UIs? I never know how much current my light is drawing. How am I going to know how long my cell will last?

Niko · 2018-05-18T20:17:51.000Z

Something simple with good thermal regulation, without any disco modes

Ronin42 · 2018-05-18T22:05:02.000Z

My big ask is to also provide an MT-G2 variant. the tint is so much better.

and also time on high/turbo is more important then max nanosecond, one second, 15 second, 30 second etc etc lumen amounts.

I totally that at some point design run into physics but lets start to see extended 2k, 3k, 4k lumen run times Percent of the time used we need 25K lumens is .0000 something really small

Lexel · 2018-05-18T22:26:17.000Z

I have made a driver for Acebeam K30 with 3x18650 and 8A output with NarsilM UI
Anduril may be as well an option

It is easy to convert this for a sofirn light, not sure if they have someone who may consider a BLF driver design and UI for their lights?

shirnask · 2018-05-20T00:31:19.000Z

2) Ramping without memory, starting on low

or preferably as Lexel suggests a BLF driver design

pc_light · 2018-05-20T01:09:06.000Z

Anthon:

Please:

From OFF:
Single click for last used mode
Double click for turbo
Triple click for strobe
Long click for moonlight

From ON:
Single click for OFF
Double click for turbo
Triple clicl for strobe
Keep pressed the button to start cycling trough modes, release the swith to stay in the desired mode

Avoid long clicks for turning ON/OFF

+1 this.

The SP32a, a light I like a lot has all but the long press for moonlight/low. Its also able to switch levels to Std mode for those occasions when I prefer fixed levels.

PBWilson · 2018-05-20T12:46:43.000Z

As it was mentioned above, I too am not so fond of the ramping on my Sofirn SP32a. It’s a bit slow and it pauses somewhere in the middle for some reason that I can’t figure. I still prefer it over individual levels. I’ve been spoiled by my other three ramping lights. I’ll probably always choose it if given the choice.

I do like the fit and finish and quality to price ratio of my two Sofirn lights.

I’m interested in this design and hope that they can speed up and smooth out their ramping and set it up with memory. I trained myself to ramp down before I turn it off. That way I’m pretty darn sure that I won’t blind myself when I turn my lights on and I can also keep a higher level set while walking the dogs at night, turn it off but still be ready to shine a higher powered beam at whatever night critter might cross my path.

To sum it up: I’d choose ramping with memory, work on the ramping speed and smoothness, have turbo available with a double click and moon with a long press. I don’t like strobe so hide it and I’d be happy.

The_Last_Katun · 2018-05-20T14:54:08.000Z

mattlward:

I have provided my input regarding the UI and they have asked if I could help gather more input for them. So, to that end… what you your preferred UI in a light like this be?

In my opinion the best UI is the one that everyone plans according to their needs; so I’d like to see a UI programmable via a USB cable

MascaratumB · 2018-05-20T17:09:16.000Z

The Last Katun:

mattlward:

I have provided my input regarding the UI and they have asked if I could help gather more input for them. So, to that end… what you your preferred UI in a light like this be?

In my opinion the best UI is the one that everyone plans according to their needs; so I’d like to see a UI programmable via a USB cable

Well, and for those that can’t do that? A programmable UI, for sure, but via USB may not be the best option though…

thijsco19 · 2018-05-20T17:36:15.000Z

It would be great if you can just edit a text file to change the UI.

SKV89 · 2018-05-20T18:12:46.000Z

Sofirn UI have always been better than the competition. My personal favorite is a well done ramping UI like that of the D4 and Narsil. Cant Sofirn just ise Narsil? Isnt it free to use? Its tweakable too to accomodate everyome’s different preferences.