SOLD
Up for sale are two lights that I hate to part with, but life is what it is.
First is a HD2010 with an extension, for holding 2x26650 or 2x18650.
It has the glass lens, aluminum reflector, (stippled reflector), the XHP70 led on copper star and a Qlite driver with extra chips to push 5+ amps to the led. Three modes, L/M/H
It will accept unprotected cells, but I do not think it will take protected, as the unprotected MNKE flat tops I have come up flush to the body tube as it is.
It's a nice bright floody light, good to about 100 yards or so. Great for walking and seeing more than just a small spot in front of you. Very bright and smooth beam.
------------------------------------------------------------------------------------------------
Next is the light I just made for myself for work, but I have to let it go.
It is a home made head out of aluminum tubing, attached to a SRK and houses the huge 95mm LUM-5-90 reflector. It is using one of my Mag drivers with 7135 chips and pulls about 8.5 amps on high. The mod for 6v is using a regulator instead of zener, courtesy of RMM, for a much lower parasitic drain. The glass lens is a 95mm lens filter. The modes are L/M/MH/H and the program is RMM's standard program with the short press forward and long press backward.
The light runs on 4x18650 cells and it is loaded and unloaded from the tail end. You remove the tail cap and load two batteries facing + up and two batteries facing - up. The spring plate can only go on one way, so load the cells, load the plate and screw down the tail cap and go. The black head is painted, so it is more susceptible to chipping. With care, it would last a long time, but it can chip like any paint job.
It's bright as hell and has a big beautiful spot that is good for hundreds of yards.
It is the best light I have made, as far as I am concerned. Very bright and a big, useful spot that will reach out about to the 1,000 yard mark. I am very happy with it, but it has to go, as they all do sooner or later.
I also have eight brand new cells if you are interested. They are Enova flat top 18650 cells, 2600maH. They cam from RMM specifically for this light, but since I am selling the light, I don't really need the cells. I will let them go with the light for $4 each, if all 8 are purchased -or- by themselves for $5 each, if all 8 are purchased.
Price on the HD2010 is $55 USD Shipped USPS CONUS ONLY
Price on the Home Made Monster is $150 USD Shipped USPS CONUS ONLY.
International - sorry but the USPS shipping prices are just getting too high to bother to list them.
Payment is PayPal oldlumens(insert the @ sign here)gmail.com
Post, Pay, them PM me with your full shipping info.
When you post, make sure you post which one you are taking. As I said above about the batteries, they are $4 each, if they are purchased with the light and $5 each if they are purchased separately.
Thanks for looking.
