SOLD: FW3A w/ 219B sw45k 9080, latest Anduril, blue glow

contactcr · 2019-07-11T03:50:17.000Z

FW3A with mods

$OLD shipped, US only priority flat rate mail

Nichia 219B sw45k 9080
Latest Anduril with manual memory, 2 mode lockout brightness, FET limited for 219B
Blue 3D printed glow gasket (needs charging from light and fades quickly with time, not aux LEDs)
Dark coated clip from first batch
Carclo 10511 Frosted Narrow optic
FW3A stock AR glass lens

SvenWalker · 2019-07-11T04:29:30.000Z

I’d be interested if it’s still available

contactcr · 2019-07-11T04:58:11.000Z

If you have a US address. I ship everything tracked and insured and it’s too much otherwise.

SvenWalker · 2019-07-11T05:34:23.000Z

I do have an US address, don’t worry. Do we proceed through PM?

electricjelly · 2019-07-11T07:11:33.000Z

I’ll take seconds if first falls through

Chatika_vas_Paus · 2019-07-11T07:31:18.000Z

contactcr:

2 mode lockout brightness

What’s this?

oweban · 2019-07-11T08:25:08.000Z

Chatika vas Paus:

contactcr:

2 mode lockout brightness

What’s this?

New in recent versions of Andùril - in lockout mode, click and hold for low mode, or click, click and hold for higher (usually second ramp lower end). Pretty nifty.

Most likely needs reflashing as I don’t believe any of the lights people have in the hands have that version yet from the factory.

contactcr · 2019-07-11T12:08:38.000Z

SPF to Sven.

oweban the very latest batch has the 2 mode lockout stock but not the other stuff. I did compile and reflash this version to get that.

oweban · 2019-07-11T12:47:03.000Z

Good to hear they’re flashing newer hexes at the factory now and yep I think I’m on the 2019-06-02 version on both mine.

nobody · 2019-07-11T15:02:46.000Z

I’d take it if the other two don’t work out.

aginthelaw · 2019-07-11T16:26:49.000Z

Are you printing the glow gaskets yourself or did you get them from neal?

contactcr · 2019-07-11T16:34:32.000Z

Light is SOLD now. Thanks everyone.

aginthelaw:

Are you printing the glow gaskets yourself or did you get them from neal?

I bought this and few XHP70 centering rings a while ago from a person who prints them from a 3D printer.