Thinking about modding SF14

stevens02 · 2018-03-20T15:03:28.000Z

Hi there, I wanted to mod a recently acquired SF14 with a MTN-DDM running Crescendo, just wanted to get your expert opinions on whether the 15 or 17mm diameter size would be a better choice. Thanks!

“”Reference material”“:DOUBLE 1 AND ½ "REVIEW": Sofirn SP10A and Sofirn SF14 *[added night / distance shots] - #2 by MascaratumB

-Steve

MascaratumB · 2018-03-20T21:00:02.000Z

I would go for a 17mm driver! The 15mm will be too “slim” to fit the pill! :+1:

stevens02 · 2018-03-22T03:10:18.000Z

Thank you, I knew I’d get a good answer.

MascaratumB · 2018-03-22T13:30:06.000Z

stevens02:

Thank you, I knew I’d get a good answer.

Show us what you’ve done, when you’ve done it
Good work :+1:

stevens02 · 2018-06-12T14:42:49.000Z

K so I managed to get the driver on the pill, but found out the ø of my driver is a little too wide for the threads inside the head. I guess more sanding is req’d. Then I realized that the springs are too long as well! I was considering shortening the spring on the tailcap side; will the different lengths of spring affect anything? Thanks!

I’ll try to add some pictures later.

Sofirn · 2018-06-13T10:03:29.000Z

Please make sure the space for battery is good for contact after you shorten the spring. Also be careful with the spring in case it damages the battery.