Thrunite Catapult V6 (mini thrower) // Full reveiw

Swib · 2018-08-12T01:01:17.000Z

Thank you wolfdog1226. I will have them sent to my US shipping point. Less hassle, cheaper, and I’ll get them quicker.

wolfdog1226 · 2018-08-12T20:30:02.000Z

Here is a beam shot of the Catvn V6 1988L/194Kcd

raccoon · 2018-08-12T21:26:54.000Z

I cannot see it.

EDIT: I get a 404 error.

deleted-200707 · 2018-08-12T21:24:03.000Z

asks me to sign in to my Google account then shows an error

wolfdog1226 · 2018-08-12T21:30:35.000Z

Ok,Thanks.

I do not seem to be able to get a video on here from my Google account. All my pics and videos from my phone go to Google photos.Then I copy/paste on here and I am the Only one able to view it.

Newlumen · 2018-08-12T22:52:55.000Z

wolfdog1226:

Ok,Thanks.

I do not seem to be able to get a video on here from my Google account. All my pics and videos from my phone go to Google photos.Then I copy/paste on here and I am the Only one able to view it.

Next time, upload to YouTube…

wolfdog1226 · 2018-08-12T23:56:21.000Z

Thanks NL. I knew I needed to do that but kept trying w/ google photos!

I hope this works,CATvn V6 NW 5000K 1988L/194Kcd w/ average video on my camera!

Newlumen · 2018-08-13T00:27:36.000Z

wolfdog1226:

Thanks NL. I knew I needed to do that but kept trying w/ google photos!

I hope this works,CATvn V6 NW 5000K 1988L/194Kcd w/ average video on my camera!

https://www.youtube.com/watch?v=6JVAS1xXju0&feature=youtu.be

Thanks for the video… why do you have to double click again at 1:05 ? Was there a stepdown?

Newlumen · 2018-08-13T01:04:36.000Z

I did the thrunite catapult v6 lumen test using Texas ace tube. Enjoy.

upload pic

wolfdog1226 · 2018-08-13T02:36:02.000Z

Newlumen:

wolfdog1226:

Thanks NL. I knew I needed to do that but kept trying w/ google photos!

I hope this works,CATvn V6 NW 5000K 1988L/194Kcd w/ average video on my camera!

https://www.youtube.com/watch?v=6JVAS1xXju0&feature=youtu.be

Thanks for the video… why do you have to double click again at 1:05 ? Was there a stepdown?

I want to make sure it was on turbo. It steps down at first ~ 2 minutes,then about every 75 seconds after that. That is with the Orbtronic 5750 battery,same as shockli 5500 cell.[PLB 55A]

Thanks for the testing,that is almost the exact numbers on mine,turn on and 30 seconds. But V54 used the Thrunite battery for my specs. Shockli/Orb. probably a bit higher.

wolfdog1226 · 2018-08-13T03:05:04.000Z

New V6 video w. special guest coming up. Probably tomorrow because it still is not on my Google photos yet.only on my phone.

Time to go to bed here in the suburbs of Philly,SUPER BOWL CHAMPS! Time will tell,they may do it again! :sunglasses:

wolfdog1226 · 2018-08-13T14:20:12.000Z

General thought here first. We all have to make best with what we have. In this case our video equipment and locations. I have some of the best locations with ZERO light pollution on these dark and isolated hiking trails.No city or Suburban lights. I just wish my video equipment[my phone!] was better!

Here is my V6 video w/ a special guest.My video recording was not the most stable as I was focusing more on my special guest!

klrman · 2018-10-20T07:53:43.000Z

I just noticed in the OP review, turbo to LVP shutdown was 90 minutes. Thrunite says 150 minutes but reality is 90 minutes which is -40% from specs. Doesn't make any sense for manufactures to make such exaggerated claims on run times. I was making a spreadsheet of run times for all my lights and was looking at reviews and came upon this one.

Pavlo · 2019-03-09T04:56:44.000Z

Can anybody please measure the diameter of the catapult v6 mcpcb shelf or provide dimensions of the square mcpcb? Thanks

KawiBoy1428 · 2019-03-09T11:35:03.000Z

Pavlo:

Can anybody please measure the diameter of the catapult v6 mcpcb shelf or provide dimensions of the square mcpcb? Thanks

32.95-33.00mm shelf diameter, 23x23mm board.

Anthon · 2019-03-09T14:23:35.000Z

KawiBoy1428:

Pavlo:

Can anybody please measure the diameter of the catapult v6 mcpcb shelf or provide dimensions of the square mcpcb? Thanks

32.95-33.00mm shelf diameter, 23x23mm board.

Did you measure the driver diameter?

KawiBoy1428 · 2019-03-09T14:39:53.000Z

Anthon:

KawiBoy1428:

Pavlo:

Can anybody please measure the diameter of the catapult v6 mcpcb shelf or provide dimensions of the square mcpcb? Thanks

32.95-33.00mm shelf diameter, 23x23mm board.

Did you measure the driver diameter?

Of course.

Pavlo · 2019-03-09T15:13:20.000Z

KawiBoy1428:

Pavlo:

Can anybody please measure the diameter of the catapult v6 mcpcb shelf or provide dimensions of the square mcpcb? Thanks

32.95-33.00mm shelf diameter, 23x23mm board.

Thank you!!

KawiBoy1428 · 2019-03-09T15:22:42.000Z

Pavlo:

KawiBoy1428:

Pavlo:

Can anybody please measure the diameter of the catapult v6 mcpcb shelf or provide dimensions of the square mcpcb? Thanks

32.95-33.00mm shelf diameter, 23x23mm board.

Thank you!!

Your welcome.

pc_light · 2019-03-09T22:34:34.000Z

KawiBoy1428:

Pavlo:

Can anybody please measure the diameter of the catapult v6 mcpcb shelf or provide dimensions of the square mcpcb? Thanks

32.95-33.00mm shelf diameter, 23x23mm board.

… x ~2mm thick. FWIW.