stephenk
May 8, 2016, 6:47am
1453
teacher:
Works for me.
Cyberescudo:
I explain the various stages.
1° stage requested: The first idea was a Jax Z1 with XP-L HI on 20mm copper star, 3,5 A on Turbo mode and of course CPFItalia engraving
2° stage requested: 22mm BLF A6 driver, XP-L HI on 20mm copper star, 18 AWG wiresmounted myself on the Jax Z1 already received
3° stage requested: 22mm BLF X6v2 driver instead of BLF A6, 20 AWG wires instead of 16 because the right compromise between thickness and current.17mm X6v2 driver,XP-L HI on 16mm copper star, 24 AWG wires in a redesigned brass pill
Does anyone know for sure if the seller has given any reason at all why the spec’s ‘Cyberescudo ’ specified were totally ignored? [ They are listed above in #3 . What he last requested and what was received .]
As has been stated before by several people… every one of the problems except a broken lens, solder joints on LED contacting Anodized Cover, or DOA light has been caused by this deviation from specs. If an explanation has not been given by the seller, as far as I am concerned it should be as well as an equitable solution to the deviation.
As has also been stated before, this is beyond a “simple fix” for some people.
+1