was I right to charge them

hello
i received some new AW 3100’s, and as I have ordered a ZL SC600 which is shipping on March 22, that is like some 4 weeks or more away from delivery to me.

when the batteries arrived, I checked them with my new XTAR VP1 charger, and the voltage reading on the display came back as 3.0v im sure. not wanting them to drop lower maybe, i contacted the seller, and they told me that should be OK being new from factory, but according to reading some stuff on here, I just charged them up to 4.0v, to like 75% if im right, and stored in a cold area.

is this ok, and would it of been ok being left at 3.0v for those 4 weeks wait?.

thank you everyone.

Darryl.

Ideal storage voltage, to my knowledge, is 3.80v-3.85v so I'm sure you didn't harm anything. I've never received batteries from any supplier that arrived with less than 3.76v in them. 3v is really low IMO and I'd have charged them immediately and checked to see if they got warm while charging (they shouldn't if they are good) and would let them sit for a bit to see if they lose their voltage just sitting. If the voltage drops substantially in a week or two just doing nothing, then I would question their quality.

hi much thanks. they were cool all the way at charge and will check them again in a week and see.
yes, i did think 3.0v was kinda low low on them, so I charged them as soon as.
thanks for the reply.

appreciated.

Where did you buy them from? Lighthound?

hi from AW, Hong Kong. Thanks.

He meant who sold (vendor) the AW batteries to you.

He was probably wondering because alot of sellers have either a good or bad reputation with us. But I’ve never really heard about a bad batch of AW’s.