What Legoes with What?

ImA4Wheelr · 2018-04-02T21:04:27.000Z

I just posted this in other thread, but realized it should be posted here too. The tubes from first generation MT03's fit the MF01. I haven't tested to see if it works because my MT03 is 4S at the moment. But other than the O-rings not reaching the head, it looks like it would work fine electronically with no to little modification. The MT03 doesn't have a battery carrier (Cells load from the tail). IIRC, the plate on the head side of the tube looks like it would mate up with the MF01 driver without modification.

The_Last_Katun · 2018-04-02T23:38:23.000Z

The head of the Ultrafire WF-502B screws perfectly onto the Revtronic PT20. Clearly the LED is that of the PT20, but the reflector has to be changed with a 26.5X31mm (I did not find it, I made it with a hand-made aluminum cone)

The image below is the original PT20 at a distance of about one meter (white wall)

The image below is the PT20 with head 502B and self-realized reflector, always at a distance of about a meter from the white wall.

In normal use (about after three meters) the various light rings are not noticed; the modification can still be improved and is easily reversible, unscrew the head of the 502B and replace the one of the PT20

ImA4Wheelr · 2018-04-03T14:42:42.000Z

They are compatible. Swapped in 2S plates to the MT03 and it works with the MF01. Makes the light much "grabbier" and easy to hold. Shorter too. Unfortunately, the MF01 tube does not fit the MT03 due to the shoulder built into the tube.

khas · 2018-04-10T12:14:06.000Z

The JAXMAN 18350 battery tube is a perfect fit for the Sofirn SP31 and SP32A

MascaratumB · 2018-04-15T22:45:48.000Z

The head of Sofirn SF14 fits on the body of the Sofirn SF10 , and the head of SF10 legoes with the SF14 body! FrankenSofirnStein

hank · 2018-11-07T20:26:57.000Z

Xref: Mateminco X6S, Factory Triple - #22 by DB_Custom

I can put the Mateminco X6S tail cap right on the Kronos battery tube like they were made to go together. I can pull the Kronos battery tube and stick it between the X6S head and tail, works fine, so yes, the Kronos X6 lights fully interchange with the Mateminco X6S EXCEPT the bezel of the X6S is shorter to adapt to the shallow triple optic.

Edit: Threads do not interchange between the Kronos/Mateminco lights and the original Eagle Eye X6.

Hst tip tp DBCustom for that.

And scroll down in that review thread for more lego-info.

hank · 2018-11-17T00:11:49.000Z

Streamer wrote here: [Sofirn Lightning Deal] Sofirn SP32AV2.0 only 20.99 on AMZ us - #67 by Streamer

Convoy S2 clicky tailcap fits the [Sofirn] Sp32 perfectly and will function as a lockout

duvallite · 2018-11-17T00:58:43.000Z

hank:

Streamer wrote here: [Sofirn Lightning Deal] Sofirn SP32AV2.0 only 20.99 on AMZ us - #67 by Streamer

Convoy S2 clicky tailcap fits the [Sofirn] Sp32 perfectly and will function as a lockout

Good Information. Thanks.

MascaratumB · 2018-11-21T00:01:21.000Z

Convoy T2 head in Jaxman E3 body (I cannot test the E3 head on the T2 body has I removed the driver from it Will try it when I het the driver )

hank · 2018-11-26T17:30:08.000Z

you can “lego” Sofirn C01 and Fenix E01. This is the way to go if you want to add a magnet or a tritium vial to your Fenix E01

pictures at the source post: [Available again! - BLF special edition light] new Sofirn AAA twisty high CRI 5mm LED - #1754 by slowtechstef
hat tip to slowtechstef

Scientist · 2018-11-29T03:42:43.000Z

I have found that the Convoy S2+ short tube (ordered from Convoy store) does not work with the Sofirn SP32A V2.0. This was a disappointing finding since MascaratumB reported that it worked in post 113 of this thread. However I now realize that was probably the V1 version. I also tried the tail cap from the Convoy S2, as this was reported to work by Streamer in post 122 above, and it does not fit. Again he says SP32 so I am not sure which version but I think V1. So as far as I can tell something is different about the SP32A V2.0 threads. If anyone has the V2.0 version and can find a short tube that works with it I would like to know about it.

MascaratumB · 2018-11-29T03:45:29.000Z

Scientist:

I have found that the Convoy S2+ short tube (ordered from Convoy store) does not work with the Sofirn SP32A V2.0. This was a disappointing finding since MascaratumB reported that it worked in post 113 of this thread. However I now realize that was probably the V1 version. I also tried the tail cap from the Convoy S2, as this was reported to work by Streamer in post 122 above, and it does not fit. Again he says SP32 so I am not sure which version but I think V1. So as far as I can tell something is different about the SP32A V2.0 threads. If anyone has the V2.0 version and can find a short tube that works with it I would like to know about it.

Scientist, I am using the tube with the SP32 V2.0! The tube must be reversed, with the non anodized threads towards the tail of the Sofirn light!
Unless there was a new modification of the SP32 host (probable…) the tube will fit and work! I have one configured like that since I showed it in the picture!
Have you tried to use it reversed?

Scientist · 2018-11-29T03:59:16.000Z

Yes I have tried both ways. The threads start but the tube does not seat deep enough. Perhaps I just have to try another tube.

deleted-200707 · 2018-11-29T03:58:29.000Z

antiparanoico:

Astrolux SC/Ultrafire C3 SS (1st version, 93mm).

ughly! just because you can, doesn’t mean you should!
geneticists take note!

hank · 2018-11-29T04:17:03.000Z

Remember, disappointment is to be expected when trying to “lego” parts — all you can do is report your own observations, but we know from experience that Chinese lights don’t have reliably consistent threading.

See What Legoes with What? - #9 by hank

djozz · 2019-03-15T13:07:59.000Z

Sofirn C01 legoes with the Maratac copper AAA

MascaratumB · 2019-03-15T14:08:23.000Z

Would be nice to get the smaller ones to light up

DavidEF · 2019-03-15T14:26:16.000Z

MascaratumB:

Would be nice to get the smaller ones to light up

Button cells? That would be cool to see.

MascaratumB · 2019-03-15T14:28:06.000Z

DavidEF:

MascaratumB:

Would be nice to get the smaller ones to light up

Button cells? That would be cool to see.

Hum, would it be possible?

djoozzzzz, can you try it? Just for fun :partying_face:

djozz · 2019-03-15T14:31:06.000Z

MascaratumB:

DavidEF:

MascaratumB:

Would be nice to get the smaller ones to light up

Button cells? That would be cool to see.

Hum, would it be possible?

djoozzzzz, can you try it? Just for fun :partying_face:

LOL, no chance, the driver boards are already touching each other.