Where can I purchase XHP70.2 led for thrower mod

[CNCman]

I have been searching / researching for a XHP70.2 led with a good bin for a thrower mod. I’m having trouble finding a reliable seller for maybe a P2 bin 5000k to 5500k led, going to DD it. Not sure if I should be looking for something more NW, but after DD it will get a little warmer.

Is there anywhere to purchase this ? Any suggestions ? Thanks

[Barkuti]

XHP70 search at Arrow.com

Results:

1. https://www.arrow.com/en/products/xhp70b-00-0000-0d0bp240e/cree ≈4000K easywhite 5-step.
2. https://www.arrow.com/en/products/xhp70b-00-0000-0d0bp20e5/cree 3750 - 4250K.
3. https://www.arrow.com/en/products/xhp70b-00-0000-0d0bp20e2/cree 5350 - 6100K.

Grab 3 or 4 0E2 units and quite likely for at least one of them to be at or below 5600 - 5500K. The others look good too, warmer tints becoming efficient. :THUMBS-UP:

Cheers ^:)

[MascaratumB]

From Convoy Store in AliExpress:

https://www.aliexpress.com/item/CREE-XHP70-2-LED-with-6V-20mm-DTP-copper-board/32850483915.html?spm=2114.search0104.3.8.1063256fWZqast&ws_ab_test=searchweb0_0,searchweb201602_3_10152_10151_10065_10344_10068_10342_10343_10340_10341_10696_10084_10083_10618_10304_10307_10820_10821_10301_10059_100031_524_10103_10624_10623_10622_10621_10620,searchweb201603_43,ppcSwitch_5&algo_expid=10cd38f3-2c27-4de9-bbdc-7d5092f83f58-1&algo_pvid=10cd38f3-2c27-4de9-bbdc-7d5092f83f58&priceBeautifyAB=0

[CNCman]

@Barkuti

Grab 3 or 4 0E2 units and quite likely for at least one of them to be at or below 5600 - 5500K. The others look good too, warmer tints becoming efficient. :+1:

Cheers :partying_face:

Thank You, I have been looking on Google and I have not found this one

[Barkuti]

By the way, if you can grab a proper boost driver (or stack a few LoL):

https://www.aliexpress.com/item/-/32873571002.html In parallel 4x 3535 boards available. Grab some XHP35s and…

Cheers :-)

[KawiBoy1428]

Here is a side by side of a P2-1A and a De-domed P2-1A Not sliced but clean de-dome and diced…with the phosphorous removed from around the die.

Clean de-domed P2-1A the spot becomes more intense and cleaner when Diced. Color balance is off, it’s just to show how clean the spot becomes, no brown/yellow halo which becomes more intense around the spot with just a sliced emitter…

Going with the 5700k the tint is going to become even warmer. The lower modes even more so… I tried these, it was just way too warm for me…https://www.mouser.com/ProductDetail/Cree-Inc/XHP70B-01-0000-0D0BP20E2/?qs=u4fy%2FsgLU9NdnU%252bTH6tlFg==

Have fun! :+1:

[Enderman]

XHP35.2 / XHP50.2 / XHP70 / XHP70.2

[Satan (Satan@103TFS)]

KB is that 70.2 and would you pls tell me how your clean dedome ?