WTS - BLF LT1 logo wrapped battery sets  - $30 shipped USPS (US only)

amishbill · 2019-10-16T18:59:53.000Z

Everyone that has ordered recently should have their packages on or before Friday.

The colored sets above should still be available, but I need to double check what’s left in white.

PKT · 2019-10-16T21:12:31.000Z

I never asked are these protected cells?

amishbill · 2019-10-16T21:19:51.000Z

PKT:

I never asked are these protected cells?

No - they are not.

As long as you get them all installed + side up, the built in protections on the lantern’s driver will take care of the rest.

PKT · 2019-10-16T22:20:47.000Z

amishbill:

PKT:

I never asked are these protected cells?

No - they are not.

As long as you get them all installed + side up, the built in protections on the lantern’s driver will take care of the rest.

Very good.The tops on these are fine. I’d written Sofirn asking about button tops/protection, their reply:

New message from: sofirnlight
My friend, sorry for the late reply due to the weekend. LT1 lantern use Button Top battery. It can use protected and unprotected battery. The lantern will be more brighter with unprotected batteries than protected batteries.

Ucm45 · 2019-10-16T22:06:55.000Z

Sending a pm for a set.

amishbill · 2019-10-16T22:06:59.000Z

PKT:

amishbill:

PKT:

I never asked are these protected cells?

No - they are not.

As long as you get them all installed + side up, the built in protections on the lantern’s driver will take care of the rest.

Very good. I’d written Sofirn asking about button tops/protection, their reply:

New message from: sofirnlight
My friend, sorry for the late reply due to the weekend. LT1 lantern use Button Top battery. It can use protected and unprotected battery. The lantern will be more brighter with unprotected batteries than protected batteries.

Please note that the NCR18650GA batteries I have chosen to use are somewhat of an exception to the Button Top Only rule. While technically they have flat tops, this particular model uses a flat top that extends ‘just a little’ past the insulation wrap like a button top does. That makes this battery compatible with spin-top lights like the SP36, Q8, etc. If a light uses a non-conductive collar around the positive contact as its means of Reverse Polarity Protection, well, I have no way of saying if this one will work or not, as the positive contact is wide and not all that tall.

PKT · 2019-10-16T22:39:10.000Z

Yes I knew the tops were OK. Sorry if I brought that into question.
What you are doing is a Good Deal, They’d cost 30.00 anywhere
.

Friendlyfodder · 2019-10-16T22:45:24.000Z

I’d like a white set with any logo and any colored plastic case, these look awesome! PM incoming

amishbill · 2019-10-18T14:20:27.000Z

Green, Pink/Purple and Orange BLF on the left are still available.
I’m open to requests for specific combinations before I start assembling more over the weekend.

jigsaw · 2019-10-18T14:21:01.000Z

Received mine yesterday Bill. They look great. Thanks for the prompt service. I’ll likely buy more.

Tarvos · 2019-10-20T09:17:21.000Z

Ordered and received as advertised. On the charger now. All read 3.5 v on charger. Will update with charge capacity from there if anyone is interested.
Nice job Omish!
Thanx

Update: all showed 2600-2605 mah from 3.5volt.
Thanks again Amish

Ucm45 · 2019-10-21T15:54:48.000Z

The batteries arrived today and they look great!

Yourrid · 2019-10-21T20:48:31.000Z

Hey AmishBill,

I’d like 1 set of batteries please!

White wrappers
“Budget Light Forum” phrase
Black silicone sleeves

PM me your PayPal and I will send the funds over immediately.

Thanks for doing this for us!

Friendlyfodder · 2019-10-21T21:50:14.000Z

Got mine quick and they look great!

PKT · 2019-10-24T16:53:07.000Z

Got mine, Great idea, the wraps are awesome. Oh and the silicone cases, I’ve never used them before,
I like. Thanks for all your trouble.

amishbill · 2019-10-24T16:58:13.000Z

Thanks for the positive reviews.

To those who are waiting for me to ship - sorry for the delays. I’ve had a few sets ready, but when I double checked I found flaws that require re-wraps. Creased/crimped paper here, a rip there…

I’m as eager for you to have them as you are to get them (and the LT1 to put them in!) - - but I also want them to be as good as you’re expecting.

Yourrid · 2019-10-27T00:36:00.000Z

Just got mine in the mail. Super quick, awesome packaging and fantastic product!

AmishBill, I think you need to start up a battery business on the side man! I’d be curious to know what kind of prices you can get Samsung 30Q’s at

amishbill · 2019-10-27T16:44:36.000Z

Yourrid:

Just got mine in the mail. Super quick, awesome packaging and fantastic product!

AmishBill, I think you need to start up a battery business on the side man! I’d be curious to know what kind of prices you can get Samsung 30Q’s at :+1:

I like the way you think, but I’m pretty sure this is a one-time opportunity for me.

but… I wonder what price I could get if I asked for 500 or 1000 of the GAs… Hmmm… :innocent:

nobody · 2019-10-27T17:34:27.000Z

Cool idea!

I would like a set of the following.

Silicone Battery cases: Black.
Wrap: White with “Let There Be Light”

amishbill · 2019-10-27T18:13:08.000Z

nobody:

Cool idea!

I would like a set of the following.

Silicone Battery cases: Black.
Wrap: White with “Let There Be Light”

You’re added to my list.
I have nothing made right now with Let There Be Light, so there will be a several day delay while I get these assembled for you.

If you IM me your paypal address, I’ll send you a payment request when I have your items ready.