Prices are USD including shipping to lower 48 CONUS PayPal F&F, offers welcome. Unfortunately I cannot supply batteries with purchase (excepting the M44 and lightsaber). Will ship USPS by default.
Since I have a lot of images I will be linking imgur albums instead of uploading them here. Please ask away if you have any questions. IF trades are allowed I could consider them.
[WTS] $20 Wurkkos TS11 (swapped SFT-40 5000K DA bin, nice tint) has scratches and dents from carry, includes 18650 tube and clip from FC11, original box with charging cable.
[SOLD] $115 Lumintop FW21 X9L (swapped to SFH55 6500K) there is a bit of a donut hole has patina and a few scratches, SOLDno some tiny dents. Copper body & bezel, titanium head, unbranded SS button. Includes copper and SS clips, original box. Originally came with SBT90.2 but that emitter got damaged. There is dust on the reflector, I don’t have air to spray it out currently.
[WTS] $52 Noctigon M44 Meteor 519A 5700K domed and CSLNM1.F1/W1 green, green lighted switch, can swap to black ring or dot switch upon request if they fit. Has been carried for outside working, has been dropped and scratched up on corners. Glass is loose/spins if moved with finger, it came like this from Hank, possibly just needs a thicker o-ring. I accidentally left it under a parked vehicle for a week and it had no water ingress after rain. This light will include three married button top Samsung 25R 18650s. They’ve only been used in this light, always charged together.
[WTS] $200 Spyderco Shaman S90V burlap micarta As pictured blade is scratched near hole/jimping/choil, has been sharpened to around 20° per side but not deburred. Liners inside are from a stonewashed S30V Shaman, this knife’s original liner was bent and had burrs. The backspacer is filed/sanded/chewed up on the rear sides that contact the liners, not visible while assembled.
Was only carried with aftermarket scales, stock scales like new. Action is nice and smooth, good lockup. Action with stock liners was atrocious. Includes stock SS and sanded MXG deep carry Ti clip + screws, all paper contents inside original box including sticker. I also have MetonBoss solid brass smooth scales for it, but they require screws that have had the head ground to a narrower diameter, I believe they were machined incorrectly. Makes the knife 14oz and a bit slippery.
[SOLD] $150 Spyderco Manix 2 LW 15V factory edge, never sharpened, only cut light cardboard. Like new EXCEPT some of the scale is chewed up under clip, as pictured. Includes contents of/and original box. Would trade for a 15V PM2 LW, Spyderco K390 or possibly M4 model. SOLD
[WTS] $200 Microtech UTX-85 D/E M390 Has been carried, sharpened to around 25°, and scratched, no chips in blade. Comes with original box and contents minus sticker. Obviously you will have to be in a state that allows OTFs. I was told I could list knives here, but will remove this one if needed. Really don’t want to get rid of this one but I don’t carry it and need the
[WTS] $222 TXQ Graflex SE Lightsaber from vendor CCsabers. Anakin/Luke version without side control box. 1" NeoPixel LED 36" blade, Proffieboard V2.2, one-hutton firmware with manufacturer installed MicroSD card loaded with many color/sound fonts. Has pretty loud and good sound, flash-on-clash, and motion sound. I like this thing but it is taking up closet space. Aluminum machined hilt with rubbery T-channel grips.
Protective plastic still on the blade but slightly frayed in spots near the tip. There are a few slight scratches (pictured) on the hilt, the small blade retention screw hex/allen flats aren’t in good shape, but is still useable/not completely stripped. There is a new threadlocked replacement screw provided, head size 2mm. No dents anywhere but where the pivoting D-ring hits the pommel, but it came like that out of the box. Has never been dropped.
Comes with box, basic instruction booklet, manufacturer provided protected 18650 battery (el cheapo protected cell, this is the second exception to the “no batteries” thing), USB-C charging cable, extra screws and worn 2mm allen wrench.
Haven’t really used it much, has been just sitting in the box for nearly a year unused.
For any other questions please ask. I’m not sure about firmware details except that it’s Proffieboard V2.2
That’s all for now. If allowed I might update this post with more listings, as I’m trying to clear some clutter.