[WTS] Several Brand New FW3T / FW3A

hank · 2019-12-01T07:15:26.000Z

Which UI version?

trailhunter · 2019-12-01T13:33:14.000Z

Starkm32:

A bit confused. Is the Nichia 219b Al $25? :innocent:

25 to reflow to 219b sw30 or sw35
35 to reflow to 219b sw45k

trailhunter · 2019-12-01T13:33:54.000Z

hank:

Which UI version?

Not sure what you mean UI version.

a1sealbeach · 2019-12-01T15:43:56.000Z

Is color aux emitters from Lexel TIR board?

trailhunter · 2019-12-01T15:50:02.000Z

a1sealbeach:

Is color aux emitters from Lexel TIR board?

Yes

a1sealbeach · 2019-12-01T16:00:56.000Z

How many emitters on board and what version is?

BOO5TED · 2019-12-01T16:14:17.000Z

hank:

Which UI version?

All FWXX lights have Anduril as the UI.

a1sealbeach · 2019-12-01T16:19:16.000Z

Maybe he means what is the UI of auxiliary board. It has a bit different UI by different version according to Lexel’s mode postings.

BOO5TED · 2019-12-01T16:29:39.000Z

This is true……

trailhunter · 2019-12-01T16:33:44.000Z

a1sealbeach:

How many emitters on board and what version is?

12 emitters total, 4 emitters around each led. Look at my examples link. The board is his later version but with LVP+Voltage stabilization.

Watermanchris · 2019-12-01T16:38:30.000Z

These are very nice. I have one with SW45Ks and Orange AUX LEDs. It’s my favorite light!

a1sealbeach · 2019-12-01T17:20:06.000Z

I take T+C-CW XPL HI with RED aux emitters. PM me for total and PP address. Thanks.

chops728 · 2019-12-01T18:01:56.000Z

You wouldn’t happen to have some of those Bio Hazzard stencils for sale

trailhunter · 2019-12-01T18:04:53.000Z

chops728:

You wouldn’t happen to have some of those Bio Hazzard stencils for sale

No, I custom made it with a vinyl cutter and did an acid etch. Someone out on this planet has it, one of a kind

chops728 · 2019-12-01T18:10:31.000Z

I need a good stencil maker again — I bead blast etch — Did you see the Yeti cup Vinh gave away with his Light Launch—I did that one for him

trailhunter · 2019-12-01T18:10:00.000Z

chops728:

You wouldn’t happen to have some of those Bio Hazzard stencils for sale

Well…… I suppose I can cut some out for you if you know how yo apply the stencil to metal. I could print 6 for 8 bucks shipped of you want it the size of what would fit on a fw3 button

chops728 · 2019-12-01T18:12:31.000Z

trailhunter:

chops728:

You wouldn’t happen to have some of those Bio Hazzard stencils for sale

Well…… I suppose I can cut some out for you if you know how yo apply the stencil to metal. I could print 6 for 8 bucks shipped of you want it the size of what would fit on a fw3 button

Do you have a Cricket Cutter or something like that —- are the stencils self adhesive

trailhunter · 2019-12-01T18:43:23.000Z

Tc xpl hi sold

hank · 2019-12-01T19:34:08.000Z

Anduril has been improved repeatedly over time.

Here, I saved this from somewhere:

Anduril firmware revision changes:
2018-12-14: fancy aux-LED (button switch LED) blinking mode (like heartbeat breathing effect) on BLF Q8/SP36
2019-05-22: 2-level lockout (4-clicks); momentary strobe mode possible (go to strobe modes before going to momentary mode)
2019-06-02: manual memory option (5H) ; button-release time-out is a bit faster
2019-06-27: factory reset function (hold button while tightening the tailcap)
2019-09-24: version-check function (15C) ; safety ramp-down if button held too long ; Emisar D18 & Astrolux MF01-Mini doesn’t have Muggle mode anymore (not fit)
2019-09-29: after safety ramp-down, also lockout the light

(later Anduril versions will have the version check, so just do the version check to find out the revision)

trailhunter · 2019-12-05T03:01:27.000Z

Bump