Wurkkos TS10 Ti (v2) much more aggressive thermal stepdown compared to regular TS10?

Couldn’t have said it better…

Dittos !!! Black has been in my pocket every waking moment since I got it. Ordered very soon after release.:+1:

1 Thank

Thanks for your impressions and the pic, that light sure does look nice! :+1::+1:

And it arrived so fast! Did you buy it via Amazon?

Thanks for the informative table, really looking forward to the TiTS10 update!

+2! My ALTS10 is the light that rocks my world! That’s why I’m really anxious to see how the TiTS10 performs, mine still hasn’t shipped (the downside of the custom engraved version I managed to snatch).

Yes I bought via Amazon, ordered the day it became available.

1 Thank

Received TiTS10, some details here

bottom line, there is definitely a serious thermal challenge. It is twofold

  1. Ceiling in advanced is set to 150/150, so disabling Turbo does not produce the expected 120 ceiling

  2. The thermal step down is severe at level 120, Im using Level 90 instead.

youre Right!
it turns out the ceiling in Advanced Smooth ramping is set to level 150/150… I lowered mine to level 90, and increased thermal ceiling to 55C

my 6000K TiTS10 light can now sustain about 225 lumens…

1 Thank

Now I just need to learn how to set those levels :joy:

1 Thank

from on, do 7H, let go at the second flash, then input 60 clics… and then do nothing and let the light stop flickering…

tip, you can do 10 clics at a time by doing 1H, so instead of 60 clics, you can do 6x long press

2 Thanks

The 4000k tint is worst than before. It’s disappointing to lose the track record with the Ti. Especially the Ti requires lower lumen usage. The beam quality is like a LH351D.

2 Thanks

Or get yourself a flashing kit from @thefreeman or @gchart and burn a new HEX with those configs baked right in (“burn” and “baked” chosen on purpose to ‘rhyme’ with all that unwanted TiTS10 ‘hotness’ :wink: )

As soon as I get mine, I will produce a new HEX with those configs built right in

And mine is already on the way, just got this email from Wurkkos:

Boo… :frowning_face: Why TF did Wurkkos have to change the main LEDs? :-1: They were perfect before…

1 Thank

I have to say that the TiTS10 has disappointed me as well. Yes, I love the RGB aux. And I had low expectations on thermals because I was a machinist for enough years to know how titanium is; the only reason I have any titanium lights at all is because the TiTS10 is a TS10.

That’s a titanium thing. While I don’t like it, I expected it enough that I won’t hold it against Wurkkos.

My 4000K reminds me why I dislike SST20’s and 219F’s. I wonder how many layers of Lee’s minus-green I’ll need to make it look as nice as my CuTS10. The garbage bin is not a valid tint bin, IMO.

2 Thanks

What’s that?

[quote=“jerv, post:77, topic:220508, full:true, username:jerv”].
[/quote]

My 4000K reminds me why I dislike SST20’s and 219F’s. I wonder how many layers of Lee’s minus-green I’ll need to make it look as nice as my CuTS10. The garbage bin is not a valid tint bin, IMO.
[/quote]

A layer of 804 did the trick. I better grab the existing copper ones instead of waiting for RGB copper.

Ok, adding “804 layer” to my original Googling did the trick: LEE ZIRCON 804 ZIRCON MINUS GREEN 4 - L804 – Sparks Lighting Supermarket

I presume that’s what you folks are talking about?

1 Thank

Yes

1 Thank

Lol* I have minus green over my 6000k but my 4000k looks good

1 Thank

TiTS10 or some other TS10?

Thanks for the confirmation. Looks like it’s available at B&H in the US: https://www.bhphotovideo.com/c/product/1437000-REG/lee_filters_804s_zircon_minus_green_4.html

Ok, $15 is not a lot of money, but 24"x24" minimum size is such a waste… for flashlight modding would last at least the next 20 lifetimes.

Anyone knows a place selling smaller pieces?

@Boaz still around?

1 Thank