XHP-50 P60 Drop in AliExpress

Andybibbville · 2019-06-06T13:50:15.000Z

Thank you Marc E for explaining that so eloquently, that makes sense for them to do that. Even with 1300 to 1500 lumens it’s still going to be a great drop in. Hopefully will get more runtime from it, since it’s not being driven so hard.

Agro · 2019-06-07T08:44:21.000Z

Thank you for the link Marc E.

RoboEgg · 2019-06-13T20:56:39.000Z

I’ve ordered one too. It’s the first XHP50.2 drop in I’ve seen on sale. Should be a slight improvement on my T6 drop in (2.5amp draw).

The_Last_Katun · 2019-06-13T21:39:53.000Z

I have already modified a couple of flashlights by replacing the XML2 with a 3-volt XHP50.2, without making any other changes; the drivers provided 2700mAh; the lumens in addition to an XML, there are, and the beam of light is more flood (at least with the parabolas of default with a diameter of about 27mm); I think the performance of an XHP50.2 is higher, with the same Amp, at 3 volts.
Overall I am satisfied, in fact, slowly, I will bring other flashlights to the standard one.
Regarding the P60, yes, the problem is the greater heat, it is a must to fill the space between the P60 and the head with metal plates (I use aluminum, beer cans) but certainly copper would be better

chooma · 2019-06-19T04:19:49.000Z

Got mine in yesterday….12 transit days.

Put it in a Solarforce shorty with purple Efest.
Yard brick wall is about 15 yards.
Yard pics are low and high.

White wall pics are at 2 and 3 feet….

I like this drop in…
http://imgur.com/gallery/i0cpUsN

texas_shooter · 2019-06-19T05:08:09.000Z

chooma:

Got mine in yesterday….12 transit days.

Put it in a Solarforce shorty with purple Efest.
Yard brick wall is about 15 yards.
Yard pics are low and high.

White wall pics are at 2 and 3 feet….

I like this drop in…
y - Album on Imgur

Great, that is a bit brighter than I thought it would be. A few extra 7135’s should help even more. Thanks for the pictures. Mine is still in the mail.

AdrianWA · 2019-08-18T06:06:07.000Z

Is it possible to build a P60 drop-in that can handle 4 x 18650s? I have a Solarforce Gladiator host that needs a drop-in. What components do I need to build one? I would like a longer run time just in case when power is out in my country.

AdrianWA · 2019-08-18T06:07:25.000Z

everydaysurvivalgear:

Andybibbville:

Okay thank you BlueswordM, I don’t know these kind of things.

This is a new 3 volt edition of the XHP50.2 so it runs at 3v and this driver is a standard 3 amp driver and should produce around 1000+ lumens probably higher maybe 1400? . If it was the 6v XHP50.2 LED at 3amps it would do over or around 2500 lumens but then it would be using a boost driver not a 7135 driver. I have bought a few driver from this store and they are decent/good. Good build quality and decent parts used but i found the 7135 driver i bought was not using an Attiny chip. If you bought one of these drivers you should get around 2500 lumens its got 6 extra 7135 so about an amp and half extra. Page Not Found - Aliexpress.com

Hey Chris nice to hear from you again and doing videos on YouTube

texas_shooter · 2019-08-18T16:18:10.000Z

AdrianWA:

Is it possible to build a P60 drop-in that can handle 4 x 18650s? I have a Solarforce Gladiator host that needs a drop-in. What components do I need to build one? I would like a longer run time just in case when power is out in my country.

Sadly many just waste the extra voltage. You’re better of with a single cell P60 and three spare batteries for longer run time. At one of the cabins we camp at, its power is limited to a single solar panel. This keeps an AGM trolling battery charged. It lights the cabin on 12 volt system plus a little 200 watt inverted. That battery alone can charge items for a long time and be recharged on a car. Might be an idea for long power outages.

AdrianWA · 2019-08-18T21:46:47.000Z

texas shooter:

AdrianWA:

Is it possible to build a P60 drop-in that can handle 4 x 18650s? I have a Solarforce Gladiator host that needs a drop-in. What components do I need to build one? I would like a longer run time just in case when power is out in my country.

Sadly many just waste the extra voltage. You’re better of with a single cell P60 and three spare batteries for longer run time. At one of the cabins we camp at, its power is limited to a single solar panel. This keeps an AGM trolling battery charged. It lights the cabin on 12 volt system plus a little 200 watt inverted. That battery alone can charge items for a long time and be recharged on a car. Might be an idea for long power outages.

.

I don’t have a car and a solar panel. I don’t want to carry a battery case with 3 spare batteries inside it. If you have a look on goggle a Solarforce gladiator is a 4 x 18650 length P60 drop-in host. Nobody wants to change batteries every now and then in the dark. Many thanks for you opinion.

texas_shooter · 2019-08-19T05:34:20.000Z

AdrianWA:

texas shooter:

AdrianWA:

Is it possible to build a P60 drop-in that can handle 4 x 18650s? I have a Solarforce Gladiator host that needs a drop-in. What components do I need to build one? I would like a longer run time just in case when power is out in my country.

Sadly many just waste the extra voltage. You’re better of with a single cell P60 and three spare batteries for longer run time. At one of the cabins we camp at, its power is limited to a single solar panel. This keeps an AGM trolling battery charged. It lights the cabin on 12 volt system plus a little 200 watt inverted. That battery alone can charge items for a long time and be recharged on a car. Might be an idea for long power outages.

.

I don’t have a car and a solar panel. I don’t want to carry a battery case with 3 spare batteries inside it. If you have a look on goggle a Solarforce gladiator is a 4 x 18650 length P60 drop-in host. Nobody wants to change batteries every now and then in the dark. Many thanks for you opinion.

I have a SolarForce Gladiator with one of their 1-4 cell dropins. No extra runtime with extra batteries over using 1 cell. They just wasted the extra voltage in the driver. I know of no 17mm driver that lowers voltage and increases run time by raising current potential. One possible option is to use a Cree XHP35 LED that is build for 12 volts and much lower current for equal output.

AdrianWA · 2019-08-19T16:03:15.000Z

How about a 4 LED P60 drop-in that can use 4 x 18650? Can you please give me a list of what I need to do my own? I just want to give it a try. Thank you so much for your reply and I’m very sorry if I sound rude.

texas_shooter · 2019-08-19T17:15:03.000Z

I got two of them a few weeks ago. One I left with the 8 7135 chips at 2.8 amps it’s an okay light with lots of spill. The other I added 4 7138 chips bring it up to 4.3 amps and it really brings this dropin to life. As is maybe 1100-1200 lumens, extra chips 1500-1600 lumens. My 12 7138 chips dropin from Pflepro actually measured 1790 lumens at 4.56 amps. The dropin is definitely worth it and works very well. With the extra chips it needs a good wrap of copper and is very much worth the effort.

AdrianWA · 2019-08-20T07:36:01.000Z

texas shooter:

I got two of them a few weeks ago. One I left with the 8 7135 chips at 2.8 amps it’s an okay light with lots of spill. The other I added 4 7138 chips bring it up to 4.3 amps and it really brings this dropin to life. As is maybe 1100-1200 lumens, extra chips 1500-1600 lumens. My 12 7138 chips dropin from Pflepro actually measured 1790 lumens at 4.56 amps. The dropin is definitely worth it and works very well. With the extra chips it needs a good wrap of copper and is very much worth the effort.

Do you sell a P60 drop in than can use 4 x 18650 by chance?

texas_shooter · 2019-08-20T16:53:48.000Z

AdrianWA:

texas shooter:

I got two of them a few weeks ago. One I left with the 8 7135 chips at 2.8 amps it’s an okay light with lots of spill. The other I added 4 7138 chips bring it up to 4.3 amps and it really brings this dropin to life. As is maybe 1100-1200 lumens, extra chips 1500-1600 lumens. My 12 7138 chips dropin from Pflepro actually measured 1790 lumens at 4.56 amps. The dropin is definitely worth it and works very well. With the extra chips it needs a good wrap of copper and is very much worth the effort.

Do you sell a P60 drop in than can use 4 x 18650 by chance?

Sorry no. Take a look at these.
http://kaidomain.com/Flashlight-DIY-and-Tools/Circuit-Board-Driver-Board/S009736-18V-5W-Cree-Circuit-Board-for-Flashlights-16_8mm-5_5mm?limit=100

kaidomain.com

3W 395nm UV 3V - 18V 1-Mode OP P60 UV Drop-in

Your output is going to be around 1 amp. You might not get any extra run time with more than one cell. The LED change out in the Dropin is going to only need a soldering iron, nothing fancy. You’ll need a 20mm star with LED.

AdrianWA · 2019-08-20T17:43:06.000Z

texas shooter:

AdrianWA:

texas shooter:

I got two of them a few weeks ago. One I left with the 8 7135 chips at 2.8 amps it’s an okay light with lots of spill. The other I added 4 7138 chips bring it up to 4.3 amps and it really brings this dropin to life. As is maybe 1100-1200 lumens, extra chips 1500-1600 lumens. My 12 7138 chips dropin from Pflepro actually measured 1790 lumens at 4.56 amps. The dropin is definitely worth it and works very well. With the extra chips it needs a good wrap of copper and is very much worth the effort.

Thank you so much.

Do you sell a P60 drop in than can use 4 x 18650 by chance?

Sorry no. Take a look at these. http://kaidomain.com/Flashlight-DIY-and-Tools/Circuit-Board-Driver-Board/S009736-18V-5W-Cree-Circuit-Board-for-Flashlights-16_8mm-5_5mm?limit=100 http://kaidomain.com/Flashlight-DIY-and-Tools/led-drop-in/3W-395nm-UV-3V-18V-1-Mode-OP-P60-UV-Drop-in-Dia-26_5mm Your output is going to be around 1 amp. You might not get any extra run time with more than one cell. The LED change out in the Dropin is going to only need a soldering iron, nothing fancy. You’ll need a 20mm star with LED.

T80Eagle · 2020-10-31T05:41:21.000Z

Hi, I’m new to flashlights… already starting to get addicted.
I’m assuming this XHP50.2 light is designed to be used with a single 18650 battery, since the listed voltage input is 3.7V~4.2V.
But are there other battery options for this LED in a P60 flashlight? For example, what happens if I power the flashlight with two CR123a batteries instead?

raccoon · 2020-10-31T07:47:05.000Z

@T80Eagle:

There's a link in my signature on how to post pics on BLF.

texas_shooter · 2020-10-31T16:37:02.000Z

T80Eagle:

Hi, I’m new to flashlights… already starting to get addicted.
I’m assuming this XHP50.2 light is designed to be used with a single 18650 battery, since the listed voltage input is 3.7V~4.2V.
But are there other battery options for this LED in a P60 flashlight? For example, what happens if I power the flashlight with two CR123a batteries instead?

I bought two of them when they came out. Two CR123A’s could fry the driver. Max continuous draw rating is 1.5 amps on most CR123A’s this dropin draws 2.8 amps on high. Two good reasons not too. However this dropin was good at 2.8 amps, I added 4 chips to one and at 4.2 amps it’s even better.

T80Eagle · 2020-10-31T18:21:43.000Z

Ok, if I understand you, it sounds like two CR123a batteries would produce too much voltage and not enough current, which makes sense to me.

You added four 7135 chips, which put more current through the emitter, and I’m guessing, that required a better heat transfer method? Man I have lots to learn. I have a soldering iron but I’ve only used it for fixing wires, I’m going to look for a guide or youtube video before I short something out lol