I would have prefered earlier shipping, but I understand the reasons for the delay.
Thanks for doing this.
Thank you for the understanding, really sorry about it.
Yes the 319A should be available in sm453. But don’t expect the Ra90 or Ra9050 anytime soon. There will be limited samples as usual. I can’t promise you guys I’ll get it though.
Hi
I finally registered so i could get me some of those incandescent-like 219C’s.
I’d like 14 of the 219C 9050 sm305.
Cheers
Welcome to the BLF unique boring guy
PM Djozz for your order
NOTE: Make it 15 and you’ll get the whole last 219C 305. Djozz isn’t online yet. I’ll update the inventory stock in #1 page for you
Thanks
I sent a PM before i saw the note but why not, I have no doubt I’ll find a use for it; I’ve sent another PM. I don’t ‘need’ it the same way as the others though so if someone was hoping to add a single one to their order or something I can easily be persuaded to give it up.
Hello,
Would it be possible to swap the XPL LED´s in the Q8 with the 219c without changing anything else (driver?)? Or will they get to much current because of the low Vf? If it is not a problem I am interested in 4* 219C 90cri 4000k. How much would it cost inklusiv shipping to Germany?
I take 4* 219C 90cri 4000k. I have send djozz a PM with further info and question. But i want to secure the LED´s before they run out!
One question: I looked in so many shops on the net but is it right that there are no 219c 90cri D280 or higher in 5000 or 5500k at the moment?
I take 4* 219C 90cri 4000k. I have send djozz a PM with further info and question. But i want to secure the LED´s before they run out!
One question: I looked in so many shops on the net but is it right that there are no 219c 90cri D280 or higher in 5000 or 5500k at the moment?
9050 max flux is only D260
Eventhough the 4500K and up already listed, they’re not ready to launch it yet. I asked for those CCTs dozen times
– Update 161128: please complete payment to Djozz/Texas_Ace BEFORE 24:00 GMT +8, December 23rd 2016. All incomplete orders will be queued to the next batch delivery
For payments to me, I do not like having peoples money any longer then needed (never know when a delay might arise) so if it is easier for you to pay now that is ok.
Otherwise I will officially open payments and send out payment instructions around the 13th of December.
We are sorry for the confusion during this extension. We didn’t expect to sell them all in the first group buy so we had planned on running a few of them till they were gone.
Since it appears they will sell out (at least the 219c’s) in this single group buy (yay, BLF power! lol) we had to change things up a bit in order to make things practical and not do another GB for 50 left over LED’s.
On that note if you want some 219C 90+ CRILED’s, better speak up soon! I am quite sure they will not last till the end date.
Thanks – can I pay now ?.
How to?.
Also I’m in London but wanting these LED’s to be sent to a state in the USA ( CWF customs )
Possible ?.
Who’s best to pay ?.
@djozz
I answered on your PM with a few questions about the payment. When you have a bit of free time please check it. So i can send you the money.
Unless there is still enough time left.
@djozz
I answered on your PM with a few questions about the payment. When you have a bit of free time please check it. So i can send you the money.
Unless there is still enough time left.
There is enough time left, as Texas Ace mentioned as well, I would feel uncomfortable to have everyone’s money already, with the leds still a month away.
Before end December I will send a combined PM to all the people on the list requesting payment.
Ok TA, put me down for 4 of those 219C sm403’s please. I’ve already got some on the way from the other group buy, but I wouldn’t mind comparing these tighter-binned emitters in the mix.
Ok TA, put me down for 4 of those 219C sm403’s please. I’ve already got some on the way from the other group buy, but I wouldn’t mind comparing these tighter-binned emitters in the mix.
Do the 319A LEDs also have 453-Tint?
I would have prefered earlier shipping, but I understand the reasons for the delay.
Thanks for doing this.
Project Excalibur - Next Generation LED Thrower (UPDATE 2018-01-15: 1.7Mcd)
Portable Thrower Comparison
Thank you for the understanding, really sorry about it.
Yes the 319A should be available in sm453. But don’t expect the Ra90 or Ra9050 anytime soon. There will be limited samples as usual. I can’t promise you guys I’ll get it though.
www.virence.com
Nichia Esttool [Nichia LED calculator] - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium
Hi
I finally registered so i could get me some of those incandescent-like 219C’s.
I’d like 14 of the 219C 9050 sm305.
Cheers
Welcome to the BLF unique boring guy
PM Djozz for your order
NOTE: Make it 15 and you’ll get the whole last 219C 305. Djozz isn’t online yet. I’ll update the inventory stock in #1 page for you
www.virence.com
Nichia Esttool [Nichia LED calculator] - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium
Thanks
I sent a PM before i saw the note but why not, I have no doubt I’ll find a use for it; I’ve sent another PM. I don’t ‘need’ it the same way as the others though so if someone was hoping to add a single one to their order or something I can easily be persuaded to give it up.
The delay is quite understandable (though I wish it were otherwise) so late December is fine. Thanks for the heads up!
djozz, any of the “219C 90cri 4000k” left ?
If yes, I would take 4 pcs on your 16mm mcpcb…
Clemence is doing the counting, but there were 300 of those so I’m sure there’s enough left.
Added you to the list!
link to djozz tests
+1 …very understandable
Finally there’s Nichia seller that will not cost me much for shipping.
Will order some after moving to new house
https://www.instagram.com/lumenzilla/
Hello,
Would it be possible to swap the XPL LED´s in the Q8 with the 219c without changing anything else (driver?)? Or will they get to much current because of the low Vf? If it is not a problem I am interested in 4* 219C 90cri 4000k. How much would it cost inklusiv shipping to Germany?
New WildTrail (former LuckySun) D80v2 Sale has Started http://budgetlightforum.com/node/66255
Yes, they will be a direct swap into the Q8. They will use a lot of current but they can handle it. Or you can simply use a lower mode as well.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Some aditional…
Please a total of
10× 219C 90cri 4000k
3× 144A 9050 sm453 with djozz MCPCB
End of december is ok. Maybe I order some 319A.
Djozz, I sent you a PM about buying a few of your MCPCB’s for the 144a
found it, will answer. I’m sorry, I’m not very fast with answering all PM’s but eventually I will answer them all.
link to djozz tests
219C 9050 sm305: SOLD OUT
219C 9050 sm353: SOLD OUT
219C 9050 sm403: (75 pcs left)
144A 9050 sm453: (86 pcs left)
144A 9050 sm503: (90 pcs left)
144A 9050 sm573: (98 pcs left)
VirEnce 30mmx30mm CDTP board (28 pcs left)
www.virence.com
Nichia Esttool [Nichia LED calculator] - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium
At this rate we will sell out before the 144A’s come in!
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
I take 4* 219C 90cri 4000k. I have send djozz a PM with further info and question. But i want to secure the LED´s before they run out!
One question: I looked in so many shops on the net but is it right that there are no 219c 90cri D280 or higher in 5000 or 5500k at the moment?
New WildTrail (former LuckySun) D80v2 Sale has Started http://budgetlightforum.com/node/66255
9050 max flux is only D260
Eventhough the 4500K and up already listed, they’re not ready to launch it yet. I asked for those CCTs dozen times
Clemence
www.virence.com
Nichia Esttool [Nichia LED calculator] - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium
– Update 161128: please complete payment to Djozz/Texas_Ace BEFORE 24:00 GMT +8, December 23rd 2016. All incomplete orders will be queued to the next batch delivery
- 219C 9050 sm305: (0 pcs left)
- 219C 9050 sm353: (0 pcs left)
- 219C 9050 sm403: (59 pcs left)
- 144A 9050 sm453: (84 pcs left)
- 144A 9050 sm503: (89 pcs left)
- 144A 9050 sm573: (98 pcs left)
- VirEnce 30mmx30mm CDTP board: (28 pcs left)
www.virence.com
Nichia Esttool [Nichia LED calculator] - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium
For payments to me, I do not like having peoples money any longer then needed (never know when a delay might arise) so if it is easier for you to pay now that is ok.
Otherwise I will officially open payments and send out payment instructions around the 13th of December.
We are sorry for the confusion during this extension. We didn’t expect to sell them all in the first group buy so we had planned on running a few of them till they were gone.
Since it appears they will sell out (at least the 219c’s) in this single group buy (yay, BLF power! lol) we had to change things up a bit in order to make things practical and not do another GB for 50 left over LED’s.
On that note if you want some 219C 90+ CRI LED’s, better speak up soon! I am quite sure they will not last till the end date.
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Thanks – can I pay now ?.
How to?.
Also I’m in London but wanting these LED’s to be sent to a state in the USA ( CWF customs )
Possible ?.
Who’s best to pay ?.
Thanks.
Formerly: malkoffdevices
London !
If the shipping address is in the US then that would be me but I see you are on djozz list. I guess the address change was recent?
Have you made sure the place you are sending them aware what is going on?
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
@djozz
I answered on your PM with a few questions about the payment. When you have a bit of free time please check it. So i can send you the money.
Unless there is still enough time left.
New WildTrail (former LuckySun) D80v2 Sale has Started http://budgetlightforum.com/node/66255
There is enough time left, as Texas Ace mentioned as well, I would feel uncomfortable to have everyone’s money already, with the leds still a month away.
Before end December I will send a combined PM to all the people on the list requesting payment.
link to djozz tests
Update 161129, GMT +8, 19:38
- 219C 9050 sm305: (0 pcs left)
- 219C 9050 sm353: (0 pcs left)
- 219C 9050 sm403: (23 pcs left)
- 144A 9050 sm453: (79 pcs left)
- 144A 9050 sm503: (88 pcs left)
- 144A 9050 sm573: (98 pcs left)
- VirEnce 30mmx30mm CDTP board (28 pcs left)
www.virence.com
Nichia Esttool [Nichia LED calculator] - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium
Ok TA, put me down for 4 of those 219C sm403’s please. I’ve already got some on the way from the other group buy, but I wouldn’t mind comparing these tighter-binned emitters in the mix.
Added!
Texas Avenger Driver Series
My LED Test series - XP-L2 V5 - Nichia 219C 90+ CRI - Latticebright "XM-L" - XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5 - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D
Easy comparison tool for all my LED tests
Update 161129, GMT +8, 21:25
- 219C 9050 sm305: (0 pcs left)
- 219C 9050 sm353: (0 pcs left)
- 219C 9050 sm403: (19 pcs left)
- 144A 9050 sm453: (79 pcs left)
- 144A 9050 sm503: (88 pcs left)
- 144A 9050 sm573: (98 pcs left)
- VirEnce 30mmx30mm CDTP board (28 pcs left)
Crazy! Almost 500 LEDs in less than 2 weeks!
www.virence.com
Nichia Esttool [Nichia LED calculator] - Shooting Beamshots With HDR - Nichia E21A Tint Shots
Its Okay To Be Smart - SmarterEveryDay - Deep Look - Veritasium
Pages