Please PM me, freeme.
donāt try to be one step ahead
Final version will have the advertised output .
I would indeed want 7000lm-8000lm for 6.5 mins, rather than 10000lm for 1-2 mins.
Iām # 49 on the list. PM me please.
Why not both?
This guy gets it
Take a look at the writing near the springs on the bottom. It says Manker, why even put the same light out in two brands. I.e. Utorch 02 vs Manker U21.
That said: interested depending on price
Freeme I still havenāt replied a PM yet mate
I am in because of 10K Lumens.
I already have a light that is pretty close - I think - my King with 12 XP-G2 and a FET driver.
I āneedā something more powerfull.
Put me down for one please
Take a look at the writing near the springs on the bottom. It says Manker, why even put the same light out in two brands. I.e. Utorch 02 vs Manker U21.
Because on our end it allows us to buy a product for a much lower price.
On Utorchās end it allows them to produce a light with much less effort and overhead.
It would be cool to have decent mode spacing near the high end so the only options arenāt 3,300 or 10,000. I agree that both a short-lived bright 10k and more cool modest 6-8k are desirable.
Put me on the list. Iām definitely down to get one of these now. Still hoping for a neutral white. fingers crossed
The assumption I was making is that manker or subsidiary of manker owns utorch and that is why each of their lights are so similar. I guess thats not the case. I couldnāt see why manker would benefit from that arrangement.
It would be cool to have decent mode spacing near the high end so the only options arenāt 3,300 or 10,000. I agree that both a short-lived bright 10k and more cool modest 6-8k are desirable.
The problem with this and why manufacturers donāt do it is because you donāt see much difference in output. They have to find a balance between good mode levels and not have too many levels. Too nant levels, like 6 or 7, can be a pain to cycle through all the time.
I agree with you, though. On my L6 with ramping firmware I tend to bring it up to max, then drop down just a tiny bit. As soon as I see the output drop a little, I stop it there. Itās almost as bright as max, but with way less heat buildup and battery drain so itās more practical.
The assumption I was making is that manker or subsidiary of manker owns utorch and that is why each of their lights are so similar. I guess thats not the case. I couldnāt see why manker would benefit from that arrangement.
Utorch is a seperate company. Manker is very upset with them. They are quite ādisgustedā by their practices. Itās just the China way, though. Manker has even āborrowedā idea and designs from other companies. Still, Utorch seems to be making very direct copies. Even releasing them at the same time or before Manker!
Interested in a PM please.
Why didnt they push it to 12000 lm?
Interested! Pm price if available
Interested for One depending on the price.
Why didnt they push it to 12000 lm?
Yes, make it a real HOT Rod!! :+1: :smiling_imp: :smiling_imp: