New 4XP Noctigon MCPCB for quad optic

[Edness]

How’s the beam profile? Square or round?

[giorgoskok]

Now that the quad boards are in , time for Meteor V2 with 4x Quads :student:

[ToyKeeper]

I need a green one, of course.

[XXX-Man]

Looks like I’m spending some money soon

[dekozn]

@djozz

Just noticed in the picture that the two flashlights have the battery tube reversed. I guess the threading on both sides of the tube is the same and this is the way to reverse the clip? (you can’t hide nothing from me )

Sharp djozz and some nice out of the box thinking :+1:

[Box]

If the price is still 30. I’ll get 3. One of each emitter type :heart_eyes:

[g_sintornillos]

@Hank Wang

D4 is almost ready, with black, grey, and green color options, various LED & tint options, XP-G2, Nichia, XP-L HI.

[leroycp]

Me like!!

[goshdogit]

Nicely done, Hank! The D4 is beautiful! :heart_eyes:

I can’t wait to order one with Nichias! :+1:

[Trevi_lux]

Green nichia for me now!!!, and perhaps black XP-L Hi, Nice lights!!

[Trevi_lux]

Please Hank no more pics…… I need a link

[hIKARInoob]

… Pretty much how I feel now…

Excited Poodle Spots its Owner - Then the Dance Begins

[pietros]

There will be no knurling on the tube?
What about tailcap magnet?

[djozz]

@pietros

There will be no knurling on the tube?
What about tailcap magnet?

That would have been nice, but a magnet that can hold a 18650 light horizontally is at least 5mm thick, I can understand a decision to go for minimal size in a light like this.

[X31 (-X3-)]

@djozz

@pietros

There will be no knurling on the tube?
What about tailcap magnet?

That would have been nice, but a magnet that can hold a 18650 light horizontally is at least 5mm thick, I can understand a decision to go for minimal size in a light like this.

More like 3mm, but yeah it adds to the length for sure… but it’s quite useful

EDIT : you can always glue a magnet to the tailcap

[CRX]

This looks great, Is there a tail spring, I usually swap that out for a magnet. Could do with knurling on the tube though.

[djozz]

I like the tube without knurling. Everyone has their preferences

[CRX]

True, not everyone can be right

[Agro]

@CRX

This looks great, Is there a tail spring, I usually swap that out for a magnet. Could do with knurling on the tube though.

There is a spring:

@Hank Wang

It does use our BeCu spring both in the tailcap and driver pcb to minimize
the resistance as small as possible.

[djozz]

@Agro

@CRX

This looks great, Is there a tail spring, I usually swap that out for a magnet. Could do with knurling on the tube though.

There is a spring:

@Hank Wang

It does use our BeCu spring both in the tailcap and driver pcb to minimize
the resistance as small as possible.

I know that spring, the coils compress to completely flat, so it takes just a mm of space. So there’s not much gained removing it.