A boost driver for constant output is the number one thing I’d like to see changed. However, I just don’t see this happening…
Nichia MF-01 ordered! Thanks Freeme!
Has anyone contacted you yet?
I’m trying to figure out the same thing. I would have already sent mine back if I’d had been asked. At this rate, it’ll be mid-November or even December before this is resolved. :person_facepalming:
Not yet. I’ve also been checking my junk email folder, just to be sure nothing was was placed there.
Uneven brightness issue for 3-4 members in BLF. Banggood will send a replacement after they ship back their faulty one.
Updated driver in 2nd batch will address to this issue. LED wiring will be changed to 3P6S according to them.
Miguel_79:Does anyone know what percentage of Astrolux MF-01 has had bugs? I’m talking about the first batch, of course. And what mistakes have they been? What has been the most repeated failure? Thanks.
Guess mine counts as extremely ‘uneven brightness’ - one bank always 100%, can’t be turned off at all (have to unscrew the tail or head).
By the way, Chinese holidays ended already? because I still don’t have any response from BG. And after that, it will be waiting for the light to be shipped back, then shipped again to me…
disappointing a little.
X0R:Bought second Q8, instead of this with poor UI.
You mean a second Q8 with poor CRI and poor lumens ?!
No offense, just kidding…I have both and appreciate them for different reasons and situations.
freeme:Uneven brightness issue for 3-4 members in BLF. Banggood will send a replacement after they ship back their faulty one.
Updated driver in 2nd batch will address to this issue. LED wiring will be changed to 3P6S according to them.
Miguel_79:Does anyone know what percentage of Astrolux MF-01 has had bugs? I’m talking about the first batch, of course. And what mistakes have they been? What has been the most repeated failure? Thanks.
Guess mine counts as extremely ‘uneven brightness’ - one bank always 100%, can’t be turned off at all (have to unscrew the tail or head).
By the way, Chinese holidays ended already? because I still don’t have any response from BG. And after that, it will be waiting for the light to be shipped back, then shipped again to me…
disappointing a little.
I can help you get a MF01 driver with Narsil UI
I can help you get a MF01 driver with Narsil UI
Thank you, I will consider it but currently I am waiting for BG.
Though I got a reply. They asked me to use Samsung 30Qs and retry…
… no comments.
Just so everyone is aware Banggood can not ship batteries to the US for some unknown amount of time due to a battery related fire at the Hong Kong airport. They are issuing refunds if you placed an order for batteries. Same with most batteries at Gearbest.
Tom Tom: patmurris:PS: mine shipped today - ordered yesterday.
Likewise, they must have their skates on, no turning back now…
Order Submitted
Oct/09/2017 18:10:53Shipped
Oct/10/2017 01:25:05Well here is something interesting, checked my tracking with flyteexpress and, da-daaa !
2017-10-10 14:23:32
Location:Birmingham Processing center,United Kingdom
Status:Item received2017-10-10 15:23:32
Location:Birmingham Processing center,United Kingdom
Status:Item in transit2017-10-11 14:29:36
Location:Birmingham Processing center,United Kingdom
Status:Item dispatched. PKG#:PKGxxxxxxxx2017-10-11 20:30:21
Location:Birmingham Processing center,United Kingdom
Status:Item in transitThen over to Royal Mail:
Track and Trace - Track your Item
We’re expecting it
Tracking no. xxx
The sender has let us know this item will be with us soon.
Royal Mail Tracked 48™Updated on: Wednesday 11 October
09:08am
Item expectedSo it looks like Banggood shipped from their EU (UK) warehouse, I might even get it in a couple of days
You are lucky. Mine:
Order Date: 2017-10-09 13:24:19
Shipped Date: 2017-10-09 19:58:02
When tracking:
Item status not found in the system.
You are lucky. Mine:
Order Date: 2017-10-09 13:24:19
Shipped Date: 2017-10-09 19:58:02
When tracking:
Item status not found in the system.
That is to be expected from Banggood page. Mine still shows “not found” there. This is normal behaviour for Banggood. IME. Usually nothing ever shows there until I have actually received the item.
You have to take the tracking number from BG and paste it into e.g. E404 to get results.
In my case the tracking number from Banggood was a recognisable UK tracking number ending in “GB” which https://www.royalmail.com/track-your-item#/ also recognised.
I think, if yours is also being sent from the EU warehouse, (which is in the UK), you might get results this way.
Could I have a code please? Thank you.
Thanks for that link.
Last thing that happened.
2017-10-11 02:55:40
Location: Flyt Express’s sorting center, Hong Kong
Status: Item in transit
Im using Trackchecker mobile app but that didn’t find anything either.
Guess I have to wait for the slow boat before I receive my MF-01.
Hmm, I hope mine doesn’t turn out to be a “first wave” one, old stock or returned :cry:
I was surprised it isn’t coming straight from China.
Hmm, I hope mine doesn’t turn out to be a “first wave” one, old stock or returned :cry:
I was surprised it isn’t coming straight from China.
Mine too Tom Tom. Does anyone know if there is a way to find out if yours is first wave or second wave? Is there a serial number difference?
There is no serial number soooooo…
Just so everyone is aware Banggood can not ship batteries to the US for some unknown amount of time due to a battery related fire at the Hong Kong airport. They are issuing refunds if you placed an order for batteries. Same with most batteries at Gearbest.
Now… where can I get 30Q BT… all other place I trust are all flat tops…
Now… where can I get 30Q BT… all other place I trust are all flat tops…
I was looking for them as well and settled with flat tops from GearBest’s “China” warehouse. Those are available to ship for a decent deal. I couldn’t find button tops at any reasonable price.
yuhsin91123:Now… where can I get 30Q BT… all other place I trust are all flat tops…
I was looking for them as well and settled with flat tops from GearBest’s “China” warehouse. Those are available to ship for a decent deal. I couldn’t find button tops at any reasonable price.
Banggood got button top ones and now idk where else to order them…. I know with a small mod by remove those plastic rings can let the flashlight take flat top batteries. But I like to keep my stuff as they are from factory if nothing is broken…
ordered nichia version, hope new driver will solve all the problems
Uneven brightness issue for 3-4 members in BLF. Banggood will send a replacement after they ship back their faulty one.
Updated driver in 2nd batch will address to this issue. LED wiring will be changed to 3P6S according to them.
Any more info on the new led wiring? So we’re currently in the 2nd batch if I’m not mistaken? New led wiring will be the 3d batch then?
I can help you get a MF01 driver with Narsil UI
How difficult would it be for a noob like me to replace the driver, if I practice some soldering first? I’d like to get started on some electronics projects, and this looks really tempting. If it is too advanced, I would be happy to pay someone to do it.