GB 351D closed.

[BlueSwordM]

I wouldn’t worry until next week.

He said the last order was mine at 10pcs of 351Bs, and he said to wait for about 2 weeks until he could get

So until next week, I’m not really worried. We should wait a bit. I’m going to PM him next week if he doesn’t respond.

[Edness]

My order was shipped a few weeks ago…still waiting for it. Looking forward to build a triple with them.

[djozz]

When I’m not at home or on holiday, I still daily check in on BLF but I consider that as borderline idiotic behaviour, perhaps AEDe lives a more normal life than some of us :person_facepalming:

[Bob_McBob]

I received my second order of 10 LH351Ds in Ontario today, shipped April 18.

[Boaz]

@Bob_McBob

I received my second order of 10 LH351Ds in Ontario today, shipped April 18.

Yeah… I’m waiting on my first ones .
So happy to hear you’ve got yours .

Note to self …Kill Bob McBob

[Bob_McBob]

What did you mod today?

I received some 90 CRI Samsung LH351Ds from AEDe and decided to swap out the 219C in my Tiara for testing. Aside from feeling a little dirty about de-Nichiaing a light, it seems to be a success. With the same optic, the LH351D has a significantly higher output. This is partially due to the bezel not being pressed in, as well as the emitter dome sitting inside the optic aperture better. The output is even higher with a Yajiamei optic. The LH351D is physically much more similar to an XP-L than a …

[khas]

My order of LH351B´s arrived in Denmark today shipped April 24.

[X31 (-X3-)]

Is it still possible to order some o those little gems ?
I totally missed that thread for an unknown reason

[DBSAR]

@~~X3~~

Is it still possible to order some o those little gems ?
I totally missed that thread for an unknown reason

Unknown. I sent him a PM inquiring on some of these too, but has has not logged on to BLF in over a week.

[The_Driver1 (The_Driver)]

I used one of my LH351Ds here (it’s in German). It’s much nicer than the XP-L2 4000K 90CRI when used in reflectors. At very high currents the tint becomes slightly pinkish/reddisch, which looks very nice. The tint is very even, but still not perfect, the corona ist yellow.

I’m happy that there is finally a XP-L sized high-cri LED with good tint. To me it’s the most obvious size missing in Nichias offering, sadly, because I think it’s probably the most practical of the current sizes.

[X31 (-X3-)]

@The_Driver

I used one of my LH351Ds here (it’s in German). It’s much nicer than the XP-L2 4000K 90CRI when used in reflectors. At very high currents the tint becomes slightly pinkish/reddisch, which looks very nice.

I’m happy that there is finally a XP-L sized high-cri LED with good tint. To me it’s the most obvious size missing in Nichias offering, sadly, because I think it’s probably the most practical of the current sizes.

This seems really nice…
Would you spare some with me ?

[The_Driver1 (The_Driver)]

@~~X3~~

@The_Driver

I used one of my LH351Ds here (it’s in German). It’s much nicer than the XP-L2 4000K 90CRI when used in reflectors. At very high currents the tint becomes slightly pinkish/reddisch, which looks very nice.

I’m happy that there is finally a XP-L sized high-cri LED with good tint. To me it’s the most obvious size missing in Nichias offering, sadly, because I think it’s probably the most practical of the current sizes.

This seems really nice…
Would you spare some with me ?

Sorry, I only got a very small amount which I intend to use all.

[X31 (-X3-)]

@The_Driver

@~~X3~~

@The_Driver

I used one of my LH351Ds here (it’s in German). It’s much nicer than the XP-L2 4000K 90CRI when used in reflectors. At very high currents the tint becomes slightly pinkish/reddisch, which looks very nice.

I’m happy that there is finally a XP-L sized high-cri LED with good tint. To me it’s the most obvious size missing in Nichias offering, sadly, because I think it’s probably the most practical of the current sizes.

This seems really nice…
Would you spare some with me ?

Sorry, I only got a very small amount which I intend to use all.

Understood :innocent:
Anyone else in EU ?

[djozz]

If I keep them they will all be used, but I can spare 2 leds for good cause.
Unless someone else has bought too many?

[Bob_McBob]

@The_Driver

I used one of my LH351Ds here (it’s in German). It’s much nicer than the XP-L2 4000K 90CRI when used in reflectors. At very high currents the tint becomes slightly pinkish/reddisch, which looks very nice.

I’m happy that there is finally a XP-L sized high-cri LED with good tint. To me it’s the most obvious size missing in Nichias offering, sadly, because I think it’s probably the most practical of the current sizes.

I’m also interested in trying an LH351D it in a reflector light, so I might stick one in my C8, which is kind of ugly with a 219C. It looks great as drop-in replacement in all the 3V Armytek lights and also behaves much better with a XP-L size optics because the size is much closer. I’m really happy to have an option that is physically so similar to the XP-L. I do notice a tint shift with current as well, but it looks pretty good on all levels, and especially at higher output. Since the 219C is often a little green to begin with it subjectively seems rather similar side-by-side.

[X31 (-X3-)]

@djozz

If I keep them they will all be used, but I can spare 2 leds for good cause.
Unless someone else has bought too many?

That’s really nice from you Djozz !
To be honest was hoping to buy 4 for a single and a triple but I can always test it with one or two and buy more later if this can happen

[djozz]

Anyone else wanting to help out a dedicated french modder with a couple of leds?

[gisewhcs]

Mine are stuck in customs at the moment.
But I’ll do the same as djozz.
When I have them in my hands I’ll send two to France.

X3, I’ll send you a Pm, when they arrive!

[BlueSwordM]

I’d like to help you X3, but I live in Quebec, and shipping would cost quite a bit.

So, until I come to France this summer to hand you some 351Ds, I wish you good luck.

[Billy_X]

I had 4 reserved for a Nightfighter 40S,but Led4Power may be stocking 90 cri 3v MZ’s,so I can do up to 4 LH351D’s.