Can Andúril do a battery check (and nothing else of the blinkies) in lock out mode?
Would that a good feature?
Lockout mode does only the following:
Momentary moon. Emitter comes on at the lowest level (ramp floor) while button is held, but stays off otherwise. Useful for quick tasks without unlocking.
Unlock. Click 4 times to exit lockout mode.
On items with a lighted button, it can also do this:
3 clicks: Change button brightness for lockout mode.
Click, click, hold: Change button brightness for regular “off” mode.
With the inner tube design. It would be possible to bore some holes in the outer tube.
Reminds me a bit of the Thorens turntable I bought with money from my first real job. Replaced the original head with a light-weight version. And drilled a lot of vent-holes in it. All in the name of losing weight. The downside was that you needed to stay away when playing a record. Slip-stream, you know. The Thorens was not IP8, of course. But that did not matter, because it was not bought to be an EDC.
I still fire up my Garrard 401, SME 3009, Quad IIs and KEF transmission line monitors when I want to hear proper sound.
With the inner tube design. It would be possible to bore some holes in the outer tube.
quote]
Little to far out of the BOX for some around here. Maybe in another light. I like it.
Drifting away from Fritz’s concept, pure engineering.
Edit: already compromised with the addition of the taper at the front.
Whatever floats your boat.
Agree that it’s not for this light. I am also torn between the original concept and the prototype with taper at the front.
I would be happy with either design.
With the inner tube design. It would be possible to bore some holes in the outer tube.
quote]
Little to far out of the BOX for some around here. Maybe in another light. I like it.
Drifting away from Fritz’s concept, pure engineering.
Edit: already compromised with the addition of the taper at the front.
Whatever floats your boat.
Agree that it’s not for this light. I am also torn between the original concept and the prototype with taper at the front.
I would be happy with either design.
I’m not torn. I didn’t like the minimalist first design. I do like the new design with a more aesthetically pleasing taper at the front. It makes a night-and-day difference to me. Then again, I don’t matter. I’m not on the list anyway.
—
The Cycle of Goodness: “No one prospers without rendering benefit to others”
- The YKK Philosophy
I fancy one of these, put me on the list please.
Put me on the list also please. Thanks.
Updated list : … Post moved to Page 130 , http://budgetlightforum.com/comment/1337438#comment-1337438
Short list, Last requests .
.
Sorry for my bad English
(google translator) , (https://www.deepl.com/translator)
Updated list : … Post moved to Page 111
-
Sorry for my bad English
(google translator) , (https://www.deepl.com/translator)
[quote=Geuzzz]With the inner tube design. It would be possible to bore some holes in the outer tube.
quote]
Little to far out of the BOX for some around here. Maybe in another light. I like it.
Please put me in for 2 lights. Thanks.
Drifting away from Fritz’s concept, pure engineering.
Edit: already compromised with the addition of the taper at the front.
Whatever floats your boat.
Lockout mode does only the following:
On items with a lighted button, it can also do this:
I still fire up my Garrard 401, SME 3009, Quad IIs and KEF transmission line monitors when I want to hear proper sound.
https://www.youtube.com/watch?v=7fJmmDkvQyc
It’s all been downhill since
I like it. It matches the muzzle brake on my AR-15.
I’m in for one please.
Agree that it’s not for this light. I am also torn between the original concept and the prototype with taper at the front.
I would be happy with either design.
I’m not torn. I didn’t like the minimalist first design. I do like the new design with a more aesthetically pleasing taper at the front. It makes a night-and-day difference to me. Then again, I don’t matter. I’m not on the list anyway.
The Cycle of Goodness: “No one prospers without rendering benefit to others”
- The YKK Philosophy
Interested in 1
Put me down for one please!
Also interested in one, thanks!
Oops, I broke the body-to-pill O-ring on my prototype today. I suppose I probably should have lubed that like six months ago when it first showed up.
Also, still bugging Lumintop for updates… but I haven’t gotten any news yet.
Dang it TK, we know have less prototypes of this light!
Find all my reviews of flashlights and more gear at www.bmengineer.com
Put me down for one please
Sugru.
I would like Two, please add me to the list.
Thanks!
It is done when it is done YAWWWWWWWWWWWWWWWN (13 months in………..)
“
Sugru.”…German? Corsican?I’m not sure if it’s a translation issue, …I don’t get it.…I don’t understand.You are number No. #18 on: Interest List , “Post # 4“:“http://budgetlightforum.com/comment/1120496#comment-1120496 , “ Page 1,“:http://budgetlightforum.com/comment/1120496#comment-1120496.-
Are you asking for another flashlight?.
How many lanterns do you want in total—?… x … units?.Sorry for my bad English
(google translator) , (https://www.deepl.com/translator)
He is not asking for another light.
KSGER STM32 2.1S Soldering Station Videos
Convoy L6 thread XHP70.2, TA FET driver, lighted side switch. - Supfire L5-S thread XHP70.2, TA FET driver, lighted side switch. Mini L6! - Thorfire S70S MTN FET driver, custom lighted side switch. - 10 NarsilM user videos for BLF Q8, GT, GT70, GT Mini, GT Micro, Astrolux S43(S) and ROT66
Texas_Ace BLF Calibrated Lumen tube and Maukka Calibration Lights for DIY Lumen Measuring Devices - List of Actively Cooled Lights - Headlight List with prices, specs and features - Jaxmnve M1 Stainless 10180 Keychain light Review - Lumintop ODF30 Review - Sofirn C8F 21700 Teardown and Review, Sofirn SP33 v2 XHP50.2 Review - My Sofirn Q8 Results - Astrolux S43S 219C Test Results - Lumintop GT Mini Test Results - Lumintop GT Micro Test Results - FW3A 3D Test Results
Sugru
- LEDs & Other Stuff - - UI CheatSheets - - Mods & Builds - -Stuff for Sale -
Interested in 1, thanks.
.
Thank you
Sorry for my bad English
(google translator) , (https://www.deepl.com/translator)
.
Thank you
Sorry for my bad English
(google translator) , (https://www.deepl.com/translator)
I used that stuff to build a rubber bumper around the edges of my ipad case. Works great!
I would like one, please add me to the list. Thanks.
Pages