FW3A, a TLF/BLF EDC flashlight - SST-20 available, coupon codes public

13450 posts / 0 new
Last post
JasonWW
JasonWW's picture
Offline
Last seen: 53 min 50 sec ago
Joined: 10/22/2016 - 11:41
Posts: 11530
Location: Houston Texas

Tom Tom wrote:
I’m a bit worried about this.

It started off as a technical tour-de-force. How to make a multiple-emitter 18650 torch with minimal materials (Fritz), state-of-the art performance, finely finished, exceptional UI (TK), no compromises.

I am dismayed to hear that there appears to be no central point of contact with Lumintop, nor any feedback after the first prototypes.

Fingers crossed that this can be turned-around.


The Miller was the one in charge of this project, but he had to leave. Luckily other members have picked up where he left off. His Q8 project was fine and his GT project was fine. I’m sure this project will be fine as well.

Fritz is pretty much in charge, but he doesn’t frequent the BLF Forum often.

Texas Ace Lumen Tube calibrated with Maukka lights

Click this to go to signature links.

pepinfaxera
Offline
Last seen: 1 day 20 hours ago
Joined: 06/25/2015 - 12:53
Posts: 267
Location: Gijón - Spain - Europe

Updated list : … “Post moved to Page 111 , http://budgetlightforum.com/comment/1329701#comment-1329701

.

Sorry for my bad English
(google translator) , (https://www.deepl.com/translator)

teacher
teacher's picture
Offline
Last seen: 2 months 5 days ago
Joined: 02/23/2016 - 19:04
Posts: 9596
Location: NE & SW Alabama

JasonWW wrote:
ToyKeeper wrote:

The main thing I’d fix, if possible, is communication. I think there needs to be a direct channel between someone at Lumintop and someone who is active in the project thread on BLF or TLF, so we can know what’s going on instead of guessing.

I wonder what Neal is up to now that the GT group buy is over? He speaks both languages and already has a relationship with Lumintop.
Yes he does… but another thing we learned from the GT Project is there are people at Lumintop who do speak English. TA proved this when he got things ‘back on track’ in a time of no communication from Neal.

What I read TK saying (and I hope I am correct) is there needs to be a point of communication between a designated person at LT & a designated person of this team.

Communication that goes freely both ways & does not have to be drug out of the LT represenative.

Communication that can then be shared, by the designated team member; with the readers of this thread.

That would be an improvement worth writing home about… Wink

You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant 

 .................................. "Slow is Smooth, Smooth is Fast" ...................................

       Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$  

         Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart  

      Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help???            TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal 

 

                                             

pepinfaxera
Offline
Last seen: 1 day 20 hours ago
Joined: 06/25/2015 - 12:53
Posts: 267
Location: Gijón - Spain - Europe

Sorry for my bad English
(google translator) , (https://www.deepl.com/translator)

wle
wle's picture
Offline
Last seen: 1 day 1 hour ago
Joined: 01/07/2015 - 13:49
Posts: 1375
Location: atlanta ga

when it is ready, can you make a new posting?
i;ve quit reading this one…

thx
wle

========
"You never have the wind with you - it's either against you, or you're having a good day."
--Daniel Behrman, "The Man Who Loved Bicycles".
========
It never gets easy, you just go faster.

--Greg Lemond.
========
,ø¤º°`°º¤ø¸,ø¤º°`°º¤ø¸,ø¤º°`°º¤ø¸
              __o
    __o     _`\<,_      __o
  _`\<,_   (*)/ (*)   _`\<,_
 (*)/ (*)            (*)/ (*)
,ø¤º°`°º¤ø¸,ø¤º°`°º¤ø¸,ø¤º°`°º¤ø¸
========

JasonWW
JasonWW's picture
Offline
Last seen: 53 min 50 sec ago
Joined: 10/22/2016 - 11:41
Posts: 11530
Location: Houston Texas

wle wrote:
when it is ready, can you make a new posting?
i;ve quit reading this one…

thx
wle


How would anyone find a new post in time?

Texas Ace Lumen Tube calibrated with Maukka lights

Click this to go to signature links.

pepinfaxera
Offline
Last seen: 1 day 20 hours ago
Joined: 06/25/2015 - 12:53
Posts: 267
Location: Gijón - Spain - Europe

wle wrote:
when it is ready, can you make a new posting?
i;ve quit reading this one…

You are number. #308 on: Interest List , “Post # 4”:“http://budgetlightforum.com/comment/1120496#comment-1120496 , “ Page 1 ,”:http://budgetlightforum.com/comment/1120496#comment-1120496
When you are ready, you will receive a PM
And, you will receive an e@mail, email, notifying you that you have a PM

Sorry for my bad English
(google translator) , (https://www.deepl.com/translator)

teacher
teacher's picture
Offline
Last seen: 2 months 5 days ago
Joined: 02/23/2016 - 19:04
Posts: 9596
Location: NE & SW Alabama

JasonWW wrote:
wle wrote:
when it is ready, can you make a new posting?
i;ve quit reading this one…

thx
wle

How would anyone find a new post in time?
Short answer is….. they would not find it.

Compared to the Q8 & GT threads (their length)….. this one is very easy to follow. No need to start a new one.
Put the info right here where most people will see it.

You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant 

 .................................. "Slow is Smooth, Smooth is Fast" ...................................

       Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$  

         Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart  

      Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help???            TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal 

 

                                             

teacher
teacher's picture
Offline
Last seen: 2 months 5 days ago
Joined: 02/23/2016 - 19:04
Posts: 9596
Location: NE & SW Alabama

pepinfaxera wrote:
wle wrote:
when it is ready, can you make a new posting?
i;ve quit reading this one…

You are number. #308 on: Interest List , “Post # 4”:“http://budgetlightforum.com/comment/1120496#comment-1120496 , “ Page 1 ,”:http://budgetlightforum.com/comment/1120496#comment-1120496
When you are ready, you will receive a PM
And, you will receive an e@mail, email, notifying you that you have a PM
Yep…. Thumbs Up

Just make sure you have enabled the below option so you will receive that email notifying you of the PM.

  • Receive email notification for incoming private messages

You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant 

 .................................. "Slow is Smooth, Smooth is Fast" ...................................

       Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$  

         Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart  

      Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help???            TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal 

 

                                             

M4D M4X
M4D M4X's picture
Offline
Last seen: 9 hours 1 min ago
Joined: 03/19/2014 - 05:17
Posts: 7575
Location: Austria (GMT + 1)

latest prototype Smile 

 

 

already member of M4DM4X.com ?

the best deals are waiting for YOU!

 

before you buy elsewhere mail me: MARTIN@M4DM4X.COM - i will try to save you money!

flashycali
Offline
Last seen: 8 hours 8 min ago
Joined: 07/12/2014 - 10:19
Posts: 85
Location: So.Cal

Nice!

Thanks for the update, can’t wait till it’s finally available!! Party

toddcshoe
toddcshoe's picture
Offline
Last seen: 15 hours 10 min ago
Joined: 01/24/2018 - 23:49
Posts: 1916
Location: Foley, MO

Looks very nice. Can’t wait. Glad I am in for a couple so far. One of the better looking lights I have seen in quite some time. Very minimalist looking but what is lurking under the hood is amazing.

"Everywhere I go, there I am"

JasonWW
JasonWW's picture
Offline
Last seen: 53 min 50 sec ago
Joined: 10/22/2016 - 11:41
Posts: 11530
Location: Houston Texas

That is a far cry from the raw machined looking finish of earlier pictures, but still looks nice.

Texas Ace Lumen Tube calibrated with Maukka lights

Click this to go to signature links.

raccoon city
raccoon city's picture
Online
Last seen: 10 min 58 sec ago
Joined: 10/06/2010 - 02:35
Posts: 13156
Location: रॅकून सिटी Palm Desert CA USA

The latest prototype looks good!  :BEER:

teacher
teacher's picture
Offline
Last seen: 2 months 5 days ago
Joined: 02/23/2016 - 19:04
Posts: 9596
Location: NE & SW Alabama

That latest prototype looks good!! Real good….. Thumbs Up

You never know how a horse will pull until you hook him up to a heavy load./"Bear" Bryant 

 .................................. "Slow is Smooth, Smooth is Fast" ...................................

       Texas Lumens Flashlights / M4D M4X Deals : sign up - save $$$$  

         Rudeness Level _ mΩ _ {width:70%} _ LightWiki _ LED Tint Chart  

      Xlamp size chart _ BatteryU _ Flashaholic? Need Professional Help???            TheOriginal _ TAB _ LightSearch _ BatterySearch _ 14500's _ DiCal 

 

                                             

cabfrank
Offline
Last seen: 3 hours 53 min ago
Joined: 11/19/2010 - 17:25
Posts: 2942
Location: healdsburg, california usa earth

It really does. A big change from the original, as Jason said, but a must have, by my way of thinking.

electricjelly
electricjelly's picture
Offline
Last seen: 1 day 15 hours ago
Joined: 08/23/2012 - 03:39
Posts: 540
Location: Los Angeles

I really like the looks of this latest prototype.
Looks very pocket friendly. The clip should hold very well.
It looks like it will tailstand very well.
The button looks like it will feel nice to operate without being prone to accidental activation.
The optics are nice and open and not being blocked by the bezel.
I just hope it won’t be all glued together so the emiters can easily be upgraded. I plan on putting some rosy 219b’s in mine.

joechina
Offline
Last seen: 1 week 2 days ago
Joined: 03/05/2016 - 08:23
Posts: 1405
Location: Germany
JasonWW wrote:
That is a far cry from the raw machined looking finish of earlier pictures, but still looks nice.

As far as I remember the raw machined lock where computer renderings.

First lamp from Fritz machined was bead blasted.
First prototype had a grey anodisation.

I still like the surface finish of the first proto most, I would vote for the darker color of the tailcap.
A dark grey.

Edit: I hope for better pictures. The first one is distorted from the phone camera. The lamp looks a bit fat Smile

maukka
maukka's picture
Offline
Last seen: 2 hours 6 min ago
Joined: 12/31/2015 - 04:15
Posts: 1901
Location: Finland
M4D M4X wrote:

latest prototype Smile 

How on earth do you have a prototype when the actual FW3A team hasn’t heard from Lumintop for some time?

joechina
Offline
Last seen: 1 week 2 days ago
Joined: 03/05/2016 - 08:23
Posts: 1405
Location: Germany
maukka wrote:
M4D M4X wrote:

latest prototype Smile 

How on earth do you have a prototype when the actual FW3A team hasn’t heard from Lumintop for some time?

Maybe the pics are from Neal direct from Lumintop?

M4D M4X
M4D M4X's picture
Offline
Last seen: 9 hours 1 min ago
Joined: 03/19/2014 - 05:17
Posts: 7575
Location: Austria (GMT + 1)

joechina wrote:
maukka wrote:
M4D M4X wrote:

latest prototype Smile 

How on earth do you have a prototype when the actual FW3A team hasn't heard from Lumintop for some time?
Maybe the pics are from Neal direct from Lumintop?

 

bingo! 

 

if I had one in my hands I would have posted a weird smiling guy picture Wink 

 

already member of M4DM4X.com ?

the best deals are waiting for YOU!

 

before you buy elsewhere mail me: MARTIN@M4DM4X.COM - i will try to save you money!

Geuzzz
Geuzzz's picture
Offline
Last seen: 1 hour 22 min ago
Joined: 10/25/2015 - 10:27
Posts: 1106
Location: Netherlands

Thanks for the pics Max.

If its not going to have the raw machined look, than I think a darker gray anodizing would suit the light better.

MascaratumB
MascaratumB's picture
Offline
Last seen: 9 hours 16 min ago
Joined: 10/29/2016 - 12:12
Posts: 4063
Location: Portugal
M4D M4X wrote:

latest prototype Smile 



 

[REVIEWS] AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 /// SOFIRN: SF14 + SP10A / SP32A / SP10B /// NITEFOX: UT20 / ES10K / K3 /// ODEPRO: KL52 / B108 /// ACEBEAM: H20 / TK16 /// BLITZWOLF: BW-ET1 /// DQG: AA Slim Ti /// HC-LIGHTS: SS AAA /// XTAR: PB2 Charger /// OLIGHT: M2R Warrior /// WUBEN: TO10R / E05 / T70 / E10 /// ON THE ROAD: M1 / i3 / M3 Pro /// ROVYVON: A2 + A5R / E300S / A8 /// KLARUS: XT1C /// LUMINTOP: Tool AA V2.0 + Tool 25 /// LIVARNOLUX: 314791 /// SKILHUNT: M150

Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 /// TIR Lenses: 1 / 2 /// Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 ///// My Collection ///// My Review's Blog (PT)

GIVEAWAY: 1

Lux-Perpetua
Lux-Perpetua's picture
Offline
Last seen: 2 hours 29 min ago
Joined: 03/01/2018 - 04:39
Posts: 1644
Location: Germany, 德国, ドイツ, Германия, जर्मनी

Will there be a LOTR edition of this flashlight, called “Eärendil”?
I could image a nice slogan on top of the cardboard box…

“Whereas Andúril, flame of the West, will fight enemies back,
may this light of Eärendil guide you in dark places, when all other lights go out!”

Tom Tom
Offline
Last seen: 6 months 2 weeks ago
Joined: 09/10/2017 - 08:30
Posts: 1163
joechina wrote:
JasonWW wrote:
That is a far cry from the raw machined looking finish of earlier pictures, but still looks nice.

As far as I remember the raw machined lock where computer renderings.

First lamp from Fritz machined was bead blasted.
First prototype had a grey anodisation.

From the first post:

“For a lot of us mere mortals, seeing the cool things machinists make on their lathe is just a dream.
Hence the finish of the FW3A will be clear anodisation, no sanding/beadblasting before anodisation.
The idea is to give all the chance to have a light looking like it came of a lathe with the protection of anodisation.”

I’m sorry but I am rather disappointed with the new photos, I don’t think the taper from the head works, it doesn’t blend with the more industrial look of the tailcap and clip etc, I prefer the original design which I think is more honest, and minimalist.

I am particularly disappointed with the beadblast finish, which ISTM is simply a cheap way to cover up surface imperfections. I’d far prefer a raw “aerospace” machined finish, ideally with a true thick un-dyed HA-3 anodisation (which is naturally a dull gray-ish finish, and immensely durable).

This would require fine machining and careful handling of the parts. Some of the best machined and anodised torches I have are MAG-LITEs so I see no reason why this one couldn’t have a similarly good finish.

I will buy this, but I’m sad that it isn’t quite what I was hoping for.

Ijon
Offline
Last seen: 2 days 10 hours ago
Joined: 09/19/2016 - 04:01
Posts: 6
Location: Kraków, Poland

I’m also keen to have this nice light. Please count me in!

qandeel
Offline
Last seen: 1 hour 54 min ago
Joined: 11/23/2011 - 15:11
Posts: 512
Location: عُمَانْ

It’s looking great.
Lets not spend more time debating the exact look of the flashlight body. This project is taking too long already. Many of us are liking the new look better. I guess it is impossible to satisfy everybody. LOL Big Smile

 عُمَانْ

scout24
Offline
Last seen: 4 months 3 weeks ago
Joined: 04/03/2012 - 20:33
Posts: 13

Also interested. Please add me to the list.

Zulumoose
Zulumoose's picture
Offline
Last seen: 2 months 4 hours ago
Joined: 04/13/2017 - 09:25
Posts: 859
Location: South Africa
Quote:
I guess it is impossible to satisfy everybody.

If you created the ultimate light, capable of producing an infinite amount of your preferred light quality in the perfect beam pattern for your intended use, at will, out of thin air, with the whole mechanism stored in another dimension so it has no volume or weight, we wouldn’t like it, because there would be nothing to look at or collect, only results.

What use are results?!! We want collectibles, and we want them in a rigidly defined schedule of unpredictability.

Beam me up!

djozz
djozz's picture
Online
Last seen: 4 min 26 sec ago
Joined: 09/07/2012 - 17:04
Posts: 15778
Location: Amsterdam

Great analysis Zmoose! Big Smile

Pages