I could not get the switch to go though the hole from the inside, so I fitted it from the outside.
I found the switch wires too short to install the switch from the inside.
Was I missing something?
I could not get the switch to go though the hole from the inside, so I fitted it from the outside.
I found the switch wires too short to install the switch from the inside.
Was I missing something?
I am happy to report that my Lumintop BLF GT70 beam profile feels even brighter and tighter in hand. This is the best flashlight since the Olight SR90!
I am happy to report that my Lumintop BLF GT70 beam profile feels even brighter and tighter in hand. This is the best flashlight since the Olight SR90!
Thats great man, never had the SR90.
JasonWW: Far Thrower:The switch wires could have been a bit longer as they have to be cut and soldered back in again.
Why didnāt the new switch fit through the switch hole? Was it thicker?
I could not get the switch to go though the hole from the inside, so I fitted it from the outside.
I found the switch wires too short to install the switch from the inside.
Was I missing something?
I assumed people would not have to solder the switch wires.
Received my kit, installation went flawlessly, button went in without issues.
thanks a bunch, I now have to wait for darkness to compare with my GT
Received my kit, installation went flawlessly, button went in without issues.
thanks a bunch, I now have to wait for darkness to compare with my GT
JasonWW: Far Thrower:The switch wires could have been a bit longer as they have to be cut and soldered back in again.
Why didnāt the new switch fit through the switch hole? Was it thicker?
I could not get the switch to go though the hole from the inside, so I fitted it from the outside.
I found the switch wires too short to install the switch from the inside.
Was I missing something?
Did your GT have the two slots ??
If so, you should have been able to turn the switch sideways & insert it from the inside without unsoldering the wires.
.
Hereās another pic.
.
Yours is a much better pic to show the āslotsā Jason. Thanks for posting it. . :+1:
Anyone in the US receive their conversion kit yet? I ordered early September I believe.
Still waiting here.
Still waiting here, too.
It shouldn't be much longer though.
The World is Not Enough, but two Lumintop BLF GT70 isā¦
:heart_eyes: Johnny English Rules!
Still waiting here.
Ok. Iām in no rush, just had some issues with the website recording the wrong address initially so I was a little worried.
teacher:Still waiting here.
Ok. Iām in no rush, just had some issues with the website recording the wrong address initially so I was a little worried.
:+1: ā¦ I donāt blame you, Iād be concerned too if I had problems with my address. Hopefully that got straightened out for you though and we will all start getting our Conversion Kits real soon. .
Hello, new to forum, I realize I missed the group buy, I was just wondering if they happened regularly, or when another might be planned.
Hello, new to forum, I realize I missed the group buy, I was just wondering if they happened regularly, or when another might be planned.
They only happen once per model. Itās not all bad, though. Usually they can still be bought with a coupon code at almost the group buy price. For the GT70 you would need to go through M4D M4X and Nealās Deals.
Where would one find the coupon code? And i canāt rember NW is more white than CW right? CW more yellow?
Where would one find the coupon code? And i canāt rember NW is more white than CW right? CW more yellow?
You can click the link I posted above or contact M4D M4X here and ask for details.
Warm is yellow.
Cool is white.
Neutral is supposed to be in between.
Got my conversion kit on last saturday. :person_facepalming: In the moment no time to replace. @BLF Team THANKS for your work :+1: