DARKSIDE | NYMPH (10440 twisty Fet+1 flashlight w/ 4k 9050 219C)

I’m in, this thing needs to be brought to life.

Hoop: interesting Kickstarter project :+1:

I hope you succeed, and joined as a backer as well.

Well guys, were down to the last ~48 hours. $5900/9000.

Im still optimistic, hopefully there will be a surge to push it over. We will see.

I just don’t understand how this level of work get’s overlooked, I find it amazing and virtually intoxicating, can’t resist.

Still hoping for the best… best of luck Hoop! :slight_smile:

This light is a great punch, indeed!!!
I wish it can be produced on the KS project and eventually later if all goes well for Hoop and the project itself! I cannot commit to this at the moment as I have another thing I want to buy and money won’t stretch in Christmas time!
If it is available somewhere in tome next year after the KS project, I will probably try it! It would be my first 10440 :smiley:

Probably because of the only cell compatible with the light being a low capacity 10440 cell.

I know I would not buy the light anyway because of my tight hobby budget not allowing buying these sorts of lights, but had it been an AA sized light with compatibility for 14500s, I think more people would be interested in it.

I still wish Hoop best of lucks!

I think the recommended Efest cell is fine assuming you get a good one. It probably would help to support 1.5V batteries (I backed it anyways) but that changes everything about the driver. 14500 is already saturated with decent boost lights and 10180 is an even worse cell than 10440 and still manages to remain usable with 1/3 the capacity of this cell. In short, 14500 brings nothing to the table except bulk.

Yeah, but I’m too used to the huge capacity that 18650s offer, and the convenience of using regular NiMH AAAs/AAs.

I think the light looks amazing, and probably is.

But honestly though, it’s just not my type of light.

Idk, Ive been looking for a “better” 14500 light that keeps a thin profile with a nice deep carry clip. I havent found much of anything in that segment that I like either.

Either way, I like to collect what I can of things made “by hand” by an artisan. All the custom 18XXX lights are way out of my budget and I probably wouldnt carry them anyway because of width and especially the cost. Hoops product is something that is definitely a work of art, but perfectly EDC-able. No other lights ive come across incorporate a FET+1 driver let alone vias for updates.

Im game for a 10440 twisty as well as a 14500 clicky if it even approaches how the Nymph is built.

Ah, but see, therein lies the rub… Hoop is a young man taking a walk out onto the limb with this relatively small and simple project, if it doesn’t get backed to fruition who knows what he may have had up his sleeves? Makes it a lot more difficult to get the bigger projects going if the entry project doesn’t take off… and I for one really want to see what else Hoop has in mind! :smiley:

Dale, that is my thought as well. I have a feeling that Brian has some very good ideas running around in his head and needs the nudge to make them happen!

I made a quick post in one of the facebook groups to remind people this is about to end. Hopefully it’ll reach its funding goal so things can move forward.

I think it’s one of the more interesting lights lately. Combination of capabilities and size is way above the competition unless we’re talking about several times more expensive customs. Even in the unlimited-budget class it would hold its own.
Then add nice looks, CRI 90….I can’t see a single weakness which happens…well…I can’t remember any previous case. Myself I would make some decisions differently, but I can’t say they would make the light genuinely better.

It’s one of those almost-superb-for-me lights. Not useful as it is but a small design change would make it superb. So I didn’t sign up. But I really with Hoop success because the job is so outstanding….

For me personally what sets this flashlight apart is the contact pads on the driver board, so you can flash the mcu in situ with new firmware.

This means it is very easy to try out alternative firmwares without disassembly of the flashlight. To me this is the digital equivalent of the modularP60 system, where you can easily replace the driver+LED with something completely different. 65 USD for a beautiful hand-crafted flashlight firmware development kit seems quite a steal :wink:

Is this “easy programming without disassembling” option a novelty in the current flashlight landscape, or are their other flashlights with this option (apart from the expensive Lux-RC driver and the proprietary Windows-only USB-programmable Nextorch myTorch flashlights)?

Edit: clarification of the easiness of re-programming the firmware.

External programming pads are rare at the moment. The D4S is one production light with them, and there are some BLF drivers that have them, but the trend is new and will eventually catch on. The plan for the Nymph is to offer several firmwares in addition to the stock one, offering user configurable mode groups and ramping.

Okay, it’s official: I’m off the fence. Just pledged to one Darkside Nymph.

This is not intended to be a stocking filler, this one is for keeps.
It will cost me about six times what I on average have spent on an AAA-light.
So not being a budget light, I still consider it to be an absolute steal. Why?

- first of all, it is a beauty. And beauty costs. Certainly at my age.

- secondly, it is not only beautiful on the outside. Read the OP and follow the link to KS.
You will notice that the specs of this tiny light are about as-good-as-it-gets.
Great care of details and quality, nice UI, built in capability to re-program, et cetera.

BTW, you have only 25 hours time to make up your mind.

Thanks Henk.

BTW, I intend to incorporate a glass lens into the design to protect the optic. Wasn’t sure if I could due to the design and how the light is assembled, but I thought of a good way to do it. :+1:

I’m in for one.

Holy cow, this looks like the kind of light you rarely see except for $$$ custom work.

I’ve never bothered with kickstarter before, and unfortunately it looks like this might not make it, but I’ve just signed up for one.

People get scared about Kickstarter, because so many projects have failed or taken forever to finish. Random people create projects, take money, and disappear. It would probably help if they knew this was by someone already known in the community, and was already almost done and would ship pretty quickly after the campaign.

Would probably also be a good idea to get on the facebook groups if you have something to sell, because it’s much more commercially oriented than BLF.