im in
Interested
In for at least one…
Where is a good place to buy a few of these bare emitters?
I already expressed interest in Post #41 but I just wanted to add that if the price is right, I may want as many as three units. I’m curious when we will get more details here.
Hank said about a week, that was only 4 days ago. Feels longer lol.
Looks good definitely interested
Also, as others have said, a 21700 sized tube would be better, if it can be pulled off in a reasonable time. It would have better aesthetic proportion with the head and it would allow much more capacity (up to 5000mAh ATM). 18650 cells would still fit, maybe with a thin sleeve.
Maybe I’ll make myself a 21700 tube as an experiment on the lathe at work….BITD…I had access to materials…ano services…
Make something, drop it in a batch going out, get it hard coated
Billet hard coated socket set holder
Interested. Extremely interested. Got my first D4 just a few days ago… time to fuel my growing Emisar habit even more.
Interested.
I am interested
In for 2 when this gets going.
I really need a smooth green D1S
You really do Chinooker, you actually owe it to yourself.
I want a D1S+ with 21700.
After some more test, we decide not to provide the D1S+ due to the issues below:
1. With the D1S original driver, when you use the 3.6V cell, you can get 320kcd without a doubt.
2. But when to limit the driver current, the driver simply can not give desired 5A current
to the LED, thus the LED is either over-driven more than 5A, or under-driven below 5A.
That is why we are not able to offer D1S+, sorry for the problem and initial hype.
But we will still offer this LED on the Noctigon MCPCB.
Regards,
Hank
Ouch
Bummer
That is unfortunate Hank, but I still want to thank you for the update on the issues. It is why you are a valued member of the community and a vendor I’m happy to support when possible.