WTS/GB: NICHIA 219B NVSL219BT-V1 R9080 EMITTERS! sw45k, sw40, sw35, sw30

Like to know this as well. I ordered the sw40 from illumn but they are d200 instead of d220.

D200 Flux Bin(200-220lm@700mA)
D220 Flux Bin(220-240lm@700mA)

D220 is just a tad brighter than D200.

If I’m not mistaken, d220 is rated at 220 lumens at 700 mA while d200 is 200 lumens at 700 mA.

I don’t have any of these, so pardon the silly question, what footprint is needed? Will they fit on boards that were made for an XPL emitter?

These use a 3535 footprint in the XP format so yes, they will fit on boards that fit an XPL emitter :slight_smile:

Interested in 8 sw45K

PM sent

I’ll take (3) 4000k sw40 d220 L2 r9080.

PM sent

I’ll take 15 sw45k d200 l2 r9080

Interested! PM sent.

I’m interested in 7 of the 4000k R9080s.

PM sent

I’ll take 6x 4000k sw40 d220 L2 r9080 bin

PM sent

The higher flux bins are usually less rosy. My D200 3000K 219B 9080 are VERY GREEN because D200 is a high flux bin for that CCT.
Have you tried the 4000K D220?

Btw, since we had so many group buys for the 4000K and 4500K and the 4500K has been available in the Fireflies series, I wonder how many people would be interested in the 2700K and 3000K rosy variant if you can get some of those. I for one would buy a bunch, especially the 2700K.

I’ve sent this most recent bin of sw40 and sw45k to a friend for testing. Will most likely have results by tomorrow.

As for the 2700k and 3000k variants, I can try and get a hold of them but it would likely require a group buy large enough to warrant the cost and effort. If I could get interest in at least 300 pcs of each CCT, I could probably make it happen.

To help kickstart it, Ill take 25 of each. If just 2700K, I will take 40 of it

Updated my original post to gauge interest.

Maybe change the title also to say GB 2700K & 3000K?