dotBLF
(dotBLF)
November 1, 2019, 6:53pm
73
Any care to elaborate on the driver/ regulation? Buck/ Boost driver? Any idea of what sort of UI are we looking at? Very excited for this!!
I’m getting at least two of these for sure. SST-20 and Osram. SBT-90 would make 3. Single 21700 is a great setup for a super-thrower, while not being seriously over-encumbering.
OH, what about colors?
sp5it
(sp5it)
November 1, 2019, 7:22pm
74
UI? Should be on/off
Mike
Skylight
(Skylight)
November 1, 2019, 7:34pm
76
Any 18350 tube possible? The design looks really nice. Other colors than gray maybe?
mattlward
(mattlward)
November 1, 2019, 8:33pm
78
Dang, good sounding light! I am curious about the change in name from Emisar to Noctigon. I figured the Noctigon name was a thing of the past.
CrashOne
(CrashOne)
November 1, 2019, 8:41pm
79
Yes, we are still working on it, here is the prototype photo, it’s not called D1SV2, it’s called Noctigon K1,
with fully regulated driver, it should reach 600+kcd with CSLNM1.TG LED, there will be green/red
beam version, as well as XP-L HI/HD LED with different color temperature.
Looks good! Is that a stainless steel bezel?
F.i.l.a.s
(F.i.l.a.s)
November 1, 2019, 8:50pm
80
Hank, could you add an SST20 95CRI (3000k or 3500k or 4000k) as stock light option? A lot of people is interested in this version, as I am. Big reflecter and regulated driver makes all sence for this Hi CRI throwy led.
Pavlo
(Pavlo)
November 1, 2019, 9:14pm
81
My guess
Emisar = Linear + FET drivers.
Noctigon = Regulated drivers like M43
ghost_face
(ghost face)
November 2, 2019, 1:36am
82
Since regulated and with Osram LED, which 21700 makes best sense to buy?
JordanZHP
(JordanZHP)
November 2, 2019, 2:30am
83
I was planning on the Samsung 50E for 5000mah unless someone recommends otherwise.
BlueSwordM
(BlueSwordM)
November 2, 2019, 2:33am
84
Here, the 50E is your best bet.
Hank_Wang
(Hank Wang)
November 2, 2019, 3:09am
86
F.i.l.a.s:
Hank, could you add an SST20 95CRI (3000k or 3500k or 4000k) as stock light option? A lot of people is interested in this version, as I am. Big reflecter and regulated driver makes all sence for this Hi CRI throwy led.
Yes, we do the customs build, bascially,
any 3535 footprint, 3V based LED can be put into it.
id30209
(id30209)
November 2, 2019, 3:16am
88
Yes, we do the customs build, bascially, any 3535 footprint, 3V based LED can be put into it.
Would you consider SST90.2?
Hank_Wang
(Hank Wang)
November 2, 2019, 3:19am
89
I don’t think so, as far as I know, the SST90.2 willl need 20A+ to push it to the maximum
performance, the stock driver can not deliver such high current.
Hank_Wang
(Hank Wang)
November 2, 2019, 3:22am
90
Anduril UI, yes, fully regulated driver (not DD) with Anduril UI.
JordanZHP
(JordanZHP)
November 2, 2019, 3:32am
91
Hank do you have any thoughts on the different types of Osram leds in this light,
such as White Flat 1mm (CSLNM1.TG) vs White Flat 2mm (CSLPM1.TG)?
Pavlo
(Pavlo)
November 2, 2019, 3:34am
92
Hank, what kind of regulated driver?