Sold: Jetbeam RRT-01 18650 extender tube

[shrike3612]

My local dealer made some RRT-01 18650 extender tubes for local flahsholics.
I provide it for you!
Below photos are tooken by local dealer, I have not received it. My orders will be delivered on today!!
Then I will upload my photos.

Type Ⅲ HA
Recommended battery size is protected 18650 cell less than 68mm or unprotected 18650 cell.
If battery size is more than 68mm, it will not assemble and turn it on.
Style A and B available.

Left is A, Right is B

Style A

Style B

Extender tube’s diameter is larger than original tube.

As you can see on photo, RRT-01’s tube is slightly smaller than 18650 extender’s tube

I recommend to use not too long battery.
I’m using this tube with unprotected 18650 cell with small sized magnet. It’s size is 5mm diameter and 1mm thickness.

I bought it here

Price
All tubes are sold out
Style A is $35 $24 (Q: 5 0)
Style B is $30 $24 (Q: 15 0)
Volume discount is available.
Shipping cost is $6 (add $1 for each body, 3 bodies’ shipping cost is $8)
Registered Airmail with partially tracking number.
Shipping day is 1st and 2nd May, then rest orders will be processed on 12th May and every Monday of week.
As I can not send a envelope withing post office working hours, shipping will be delayed. Sorry for that.
However if you choose EMS shipping, I can send it right away!
EMS is available. It is more fast and safe shipping option. Full tracking service. Cost is $25 (add $1 for each body)
Ask anything, send PM

Send PM first!

Thanks for looking!

[bgyen]

Looks good. I like them both, maybe the B version slightly more. As much as I would like too use a 18650 in my RRT-01, the price is too much for me.

[shrike3612]

PM sent

@bgyen

Looks good. I like them both, maybe the B version slightly more. As much as I would like too use a 18650 in my RRT-01, the price is too much for me.

[mfpmax]

Illumination Supply needs to have these to go with all the flashlights they sold :bigsmile:

[shrike3612]

:bigsmile:

@mfpmax

Illumination Supply needs to have these to go with all the flashlights they sold :bigsmile:

[shrike3612]

bump

[ToyKeeper]

These look really nice. I’m a little bummed that it can’t fit 69mm cells though, since protection is somewhat important on a light with no low-voltage detection.

I hear the Convoy S2’s body can also be used as a 18650 battery tube for this light, after filing down the thread end a bit to shorten the threaded area. And it includes a tail clicky. But it wouldn’t match the style, and it has no clip.

The B-style extender looks like it was always meant to be there.

[bgyen]

Think I might give the S2 tube a try. I saw this on reddit.

http://www.reddit.com/r/flashlight/comments/27wxae/jetbeam_rrt01_w18650/

Combine the head of the RRT01 with the battery tube and clickie of a Convoy S2, and you get a RRT01 that can use 18650’s, has a rear clickie, and still has anodized threads for tailcap lockout. For $10 and optional filing, it’s well worth it even if the 18650 tube is very rarely used.
It works straight out of the box, but it’d work better if the S2 battery tube threads were filed down by a couple millimeters. You can barely see the gap in the picture.
RRT01 mutant
Here’s a better picture of the gap. You can see the oring.

[Ray-o-light]

Hello Shrike, are type A or B still available? Thinking of getting the RRT-01, and this would be a great addition.

[travis]

I wonder if this would also fit the Eye10……

[Streamer]

@travis

I wonder if this would also fit the Eye10…

I'm almost 100% sure it would. They are virtual clones.

[shrike3612]

@Ray-o-light

Hello Shrike, are type A or B still available? Thinking of getting the RRT-01, and this would be a great addition.

All of them are still on sale.

[shrike3612]

@travis

I wonder if this would also fit the Eye10……

Definitely it fits with EYE-10.

I will upload photo in 2 or 3 days.

[Ray-o-light]

Sent the funds for a “B” style extension tube. Thanks Kim, Don A.

[shrike3612]

Niteye EYE-10 with 18650 tube

Left EYE-10 with 18650 tube vs. Right RRT-01 with 18650 tube

[Ray-o-light]

The anodizing is a pretty good match for the JetBeam gray. Workmanship is excellent.

[id30209]

Noiceeeeee

[Coppet]

Yes that would be nice if you could still buy them today but so it is quite pointless to warm up this five year old thread again

[id30209]

Yes i’m aware. By accident i’ve placed a comment cause a member in other thread point me here.
Other option is now available at almost the same price.
Still good looking and regarding new groupbuy is undergoing at the moment for old RRT01 i’d say this is still an option