It might be okay if the front was shielded. I've seen a few posts asking about LED bulb replacements like these, but no reviews yet. Of course their lumen claim is chinarously exaggerated.
So coincident!
I ordered this set last month end, postman handed me this morning.
All lousy phone photos, my apology
4 pieces of Cool White XM-L2, night shot below
Instruction shown install the front part onto the headlight first, then the unit follow, twist lock type.
connector & driver unit, doesn’t seems to be waterproof to me, I’ll dab some silicone later this weekend.
Yep, pretty thin wires
Better view on the twist lock, well maybe not
Passive heatsink & O-ring seal
XM-L2 emitter vs Halogen bulb
another shot
Both installed, it does have Hi-Low beam.
I’ll try at clear road and get back again.
EDIT:
Night shot, some signboard lighting in front
Using phone camera, taken from driver seat
I not sure what happen to the beam pattern, the L & R seems uneven, I need to recheck the cone seating etc, but this is as close as I see.
Bucket empty?
Fixed the photo links for you.
Thank you THE
It looks like it has artifacts in the beam pattern shown on the ground. Hopefully further adjustment will get rid of those.