Thin thread sticking to the reflector

3 posts / 0 new
Last post
RapidLux
Offline
Last seen: 6 hours 57 min ago
Joined: 03/24/2017 - 13:21
Posts: 11
Thin thread sticking to the reflector

Just received my Thorfire S70S. I noticed there is a little thin knurled metallic thread about 1 cm length, sticking to the reflector there inside. Should I remove that thin thread before firing up the light or is it nothing to worry about? Something I should be wary about so that nothing breaks or cracks?

Edited by: RapidLux on 05/17/2017 - 16:55
Lightbringer
Lightbringer's picture
Offline
Last seen: 55 min 18 sec ago
Joined: 08/30/2016 - 14:12
Posts: 1389
Location: nyc

The ocd part of me would want to get rid of it.

Tweezers if part’s off the reflector, compressed air if not.

09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0

SoCalTiger
SoCalTiger's picture
Offline
Last seen: 1 hour 5 min ago
Joined: 03/16/2017 - 14:06
Posts: 141
Location: Southern California

It probably won’t break anything but I would try to blow it out or use tweezers like Lightbringer said.