Haikelite Products Upgrade and Improvement Official Announcements

73 posts / 0 new
Last post
JasonWW
JasonWW's picture
Offline
Last seen: 2 hours 49 min ago
Joined: 10/22/2016 - 11:41
Posts: 5210
Location: Houston Texas

They are not using Narsil, but I hope they consider it. After using it in one light, I want all my lights to have it! You can’t beat ramping.

My Convoy L6 thread with XHP70.2, Texas Avenger FET driver, Narsil v1.2 ramping firmware, lighted side switch and cut down SMO reflector. Lots of amp draws on stock driver as well.
http://budgetlightforum.com/node/54477

My Supfire L5-S thread with XHP70, Texas Avenger FET driver, NarsilM v1.0 ramping firmware and lighted side switch. My mini L6! http://budgetlightforum.com/node/55746

9 NarsilM user videos including GT
http://bit.ly/narsil-vid1

Lexel
Lexel's picture
Offline
Last seen: 10 hours 55 min ago
Joined: 11/01/2016 - 08:00
Posts: 3823
Location: Germany

So far I know that HaikeLight is using a modified TA Board Layout, but with their own MCU

Texas_Ace
Texas_Ace's picture
Offline
Last seen: 6 hours 22 min ago
Joined: 03/24/2016 - 07:44
Posts: 6140
Location: Everything is brighter in Texas

Yes, Narsil would be fantastic to see used on this light. It was what the TA driver was designed for when used with an e-switch.

Haikelite, I am happy to help you get Narsil working on your light with my Texas Avenger driver. It is truly a fantastic firmware that everyone loves.

Know guns, know peace, know safety. No guns, no peace, no safety.

The ultimate result of shielding men from the effects of folly is to fill the world with fools. --Herbert Spencer , English Philosopher (1820-1903)

Texas Avenger Driver Series

My LED Test series - XP-L2 V5  - Nichia 219C 90+ CRILatticebright "XM-L"XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5  - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D

Easy comparison tool for all my LED tests

mizou51
Offline
Last seen: 3 weeks 4 days ago
Joined: 01/17/2016 - 12:06
Posts: 289
Location: France

Texas_Ace wrote:
Yes, Narsil would be fantastic to see used on this light. It was what the TA driver was designed for when used with an e-switch.

Haikelite, I am happy to help you get Narsil working on your light with my Texas Avenger driver. It is truly a fantastic firmware that everyone loves.

Ta

Did you get Dale?

Texas_Ace
Texas_Ace's picture
Offline
Last seen: 6 hours 22 min ago
Joined: 03/24/2016 - 07:44
Posts: 6140
Location: Everything is brighter in Texas

mizou51 wrote:
Texas_Ace wrote:
Yes, Narsil would be fantastic to see used on this light. It was what the TA driver was designed for when used with an e-switch.

Haikelite, I am happy to help you get Narsil working on your light with my Texas Avenger driver. It is truly a fantastic firmware that everyone loves.

Ta

Did you get Dale?

Not yet, I assume because of the weekend they are waiting till Monday to get back to me.

Know guns, know peace, know safety. No guns, no peace, no safety.

The ultimate result of shielding men from the effects of folly is to fill the world with fools. --Herbert Spencer , English Philosopher (1820-1903)

Texas Avenger Driver Series

My LED Test series - XP-L2 V5  - Nichia 219C 90+ CRILatticebright "XM-L"XHP35 & PWM efficiency - XHP50 - XP-L V5 - XM-L2 U2 - XP-G3 S5  - XP-L HI V2 - Oslon Square & direct comparison to Djozz tests - Nichia 319A - Nichia 219B 9080 CRI - Nichia 219C D320 - Nichia 229AT - XHP70.2 P2 - XHP50.2 J4 - Samsung LH351D

Easy comparison tool for all my LED tests

Lexel
Lexel's picture
Offline
Last seen: 10 hours 55 min ago
Joined: 11/01/2016 - 08:00
Posts: 3823
Location: Germany

I also skyped with HaikeLight and so far they wrote me his engeneer asked me about a Narsil.bin

I did reply how to use Atmel studio and AVR dude to get used to flash Atmel Attiny MCUs, but got no response as its weekend now

KawiBoy1428
KawiBoy1428's picture
Offline
Last seen: 1 hour 33 min ago
Joined: 04/11/2014 - 18:05
Posts: 2656
Location: The Motor City

Texas_Ace wrote:
Yes, Narsil would be fantastic to see used on this light. It was what the TA driver was designed for when used with an e-switch.

Haikelite, I am happy to help you get Narsil working on your light with my Texas Avenger driver. It is truly a fantastic firmware that everyone loves.


I specially love how the double click to Turbo is instantaneous, unlike the Q8 and D4V2, don’t like the Lag/Drop out to Turbo, maybe that could be cured in the configuration settings? I have asked Lexel to make me some 42mm T/A Narsil drivers for the TN42 XHP70/50 mods, can’t wait to try them out!

I like the Lexel built T/A Narsil drivers so much I have them in 1 M6 triple 2- L6’s 2-SD75’s and the Super Courui D01. So for the TN42’s Narsil will be a natural match. I’m running the FETDD 2S2P LDO moppydrv. in them now, will keep one of the TN42’s with it for all the different modes you can choose.

Sold the 2 Q8’s I modded, to a couple co-workers, (I like my M6 triple/4 cells with Narsil better) meh civilians what do they care…. Wink

KB1428 “Live Life WOT”

Lexel
Lexel's picture
Offline
Last seen: 10 hours 55 min ago
Joined: 11/01/2016 - 08:00
Posts: 3823
Location: Germany

KawiBoy1428 wrote:
Texas_Ace wrote:
Yes, Narsil would be fantastic to see used on this light. It was what the TA driver was designed for when used with an e-switch.

Haikelite, I am happy to help you get Narsil working on your light with my Texas Avenger driver. It is truly a fantastic firmware that everyone loves.


I specially love how the double click to Turbo is instantaneous, unlike the Q8 and D4V2, don’t like the Lag/Drop out to Turbo, maybe that could be cured in the configuration settings? I have asked Lexel to make me some 42mm T/A Narsil drivers for the TN42 XHP70/50 mods, can’t wait to try them out!

I like the Lexel built T/A Narsil drivers so much I have them in 1 M6 triple 2- L6’s 2-SD75’s and the Super Courui D01. So for the TN42’s Narsil will be a natural match. I’m running the FETDD 2S2P LDO moppydrv. in them now, will keep one of the TN42’s with it for all the different modes you can choose.

Sold the 2 Q8’s I modded, to a couple co-workers, (I like my M6 triple/4 cells with Narsil better) meh civilians what do they care…. Wink

TOM E implemented the lag to turbo so it does not do turbo when you go to lock out, battcheck for example
in earlier versions it was instant, not sure if he could implement a switch in setup file so we can decide if its instant or lagged

Rusty Joe
Rusty Joe's picture
Offline
Last seen: 5 days 15 hours ago
Joined: 07/24/2011 - 00:22
Posts: 2878
Location: Austin, TX

You never replied to my PM, Haikelite.

Eat Once a Day - Lose Weight - Feel Great!

www.omad.info

elbee
Offline
Last seen: 1 month 2 days ago
Joined: 07/29/2017 - 09:28
Posts: 16

Here’s an update regarding my experience with Haikelite after having bought an SC01 having a faulty switch/driver. After a bit of back-and-forth messaging on this forum with Haikelite, they agreed to send me a new head for the SC01, which arrived today and resolved my issue. Smile

DENGOH
DENGOH's picture
Offline
Last seen: 2 hours 48 min ago
Joined: 10/06/2012 - 05:26
Posts: 1703

HaikeLite Official, can you answer issues with your new model of MT09R here?
It would be great if there are investigation and root cause analysis on those issues like flickering and low output. And also maybe answer for question about MT09R be sold on store like Banggood or GearBest?
Thank you.

cool i'll see you when you get there

bimmernut318
Offline
Last seen: 23 hours 17 min ago
Joined: 10/04/2013 - 11:10
Posts: 112
Location: Florida
DENGOH wrote:
HaikeLite Official, can you answer issues with your new model of MT09R here? It would be great if there are investigation and root cause analysis on those issues like flickering and low output. And also maybe answer for question about MT09R be sold on store like Banggood or GearBest? Thank you.

Great idea, would love to see the official answers to MT09R!

Pages