Varity tools measurement request

7 posts / 0 new
Last post
kiriba-ru
kiriba-ru's picture
Offline
Last seen: 54 min 23 sec ago
Joined: 01/17/2016 - 02:34
Posts: 1692
Location: Russia
Varity tools measurement request

Im starting this thread to ask and save some measurements from tool parts (neither electric or machinary), including region differences.

Q1. Angle grinder
imagebam.com
Can anyone confirm that cylindrincal place under threads have main threads OD with 0.01mm tolerance (15.87-15.88 for NA, 13.99-14.00 for other world)?

Need a vlogger for machine accessories reviews

Edited by: kiriba-ru on 05/15/2018 - 04:45
kiriba-ru
kiriba-ru's picture
Offline
Last seen: 54 min 23 sec ago
Joined: 01/17/2016 - 02:34
Posts: 1692
Location: Russia

Bump

Need a vlogger for machine accessories reviews

thijsco19
Offline
Last seen: 1 hour 18 min ago
Joined: 12/14/2012 - 16:18
Posts: 1229
Location: Nearby Rotterdam, the Netherlands

I measured the one we have here at 13.8 / 13.9 but it is a old one so probably worn down.

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 54 min 23 sec ago
Joined: 01/17/2016 - 02:34
Posts: 1692
Location: Russia

Thank you.
Waiting measurements for 5/8” version.

Need a vlogger for machine accessories reviews

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 54 min 23 sec ago
Joined: 01/17/2016 - 02:34
Posts: 1692
Location: Russia

Up

Need a vlogger for machine accessories reviews

klrman
klrman's picture
Offline
Last seen: 14 hours 16 min ago
Joined: 11/07/2016 - 22:44
Posts: 1381
Location: Canada

15.85-15-86 for my milawaukee which is fairly new.  Based on manufacturing conditions, it could he hit or miss as I doubt that the cylindrical part under the threads is considered critical dimensions for a tool like an angle grinder and could vary quite a bit between the same model.

kiriba-ru
kiriba-ru's picture
Offline
Last seen: 54 min 23 sec ago
Joined: 01/17/2016 - 02:34
Posts: 1692
Location: Russia

Thank you.

Need a vlogger for machine accessories reviews