PD68 Modder's / Parts sale. - Courui D01 added

13 posts / 0 new
Last post
pilotdog68
pilotdog68's picture
Offline
Last seen: 3 weeks 5 days ago
Joined: 05/30/2013 - 23:31
Posts: 6418
Location: Held against my will in IOWA, USA
PD68 Modder's / Parts sale. - Courui D01 added

I still use my flashlights and I probably still have 10+, but I haven’t modded anything in over a year so it’s time to clear out some parts before they get too outdated to be worth anything. I would love to combine shipping on multiple items to make things cheaper. Make me an offer if you think I’m too high; I want this stuff gone.

Newly added: Modded CouruiPhotoAlbum SOLD

Good condition. The ano on these lights was never very thick, so there a couple nicks but no abuse. Reflector is very good.

Has dedomed XP-G2 on a Noctigon, spring bypasses, simple 3-mode FET driver, and I added a physical lockout switch on the tail.

I’m thinking $40 + free shipping in US, or best offer.

__________________________________

1. TM16 ProjectPhoto Album SOLD

The plan was to convert this to 4-series and go quad XHP35 HI. I was using a standard 3v FET driver with power bled off a single cell while controlling the 12v feed. I had it all done, just needed to assemble and tweak the firmware.

Then I killed an emitter and I was fed up with the whole thing so it went in a box.

Everything in great condition. The reflector and lens went in a ziploc bag on day one and never came out, so they should be clean and ready to go.

Includes the original mcpcb, emitter, and driver. So if you want to rewire it I think you should be able to get it back to a normal TM16. Not 100% on that though.

Includes the 4 XHP35’s on modified sinkpads (1 dead) and 2 matching new bare emitters if you want to complete the project.

$50 + shipping

___________________________________

2. Crelant 7G3CS Project/HostPhoto Album SOLD

Good condition, just a few marks on the tailcap from trying taking the retaining ring off. I took the tail apart to design an illuminated tailcap pcb (never happened), and never got back to it. Includes all the original parts except no driver. There is a shaved-dome Nichia 219c on a Noctigon/Sinkpad already installed with wires going into the driver cavity.

$15 + free shipping in US

__________________________________

3. March C8 Working LightPhoto Album SOLD

Light has been unaltered. Seems to have a pretty nice driver but the emitter is fairly blue. The ano and build is probably the nicest C8 I have seen to date.

This was given to me free by another member, so it is free to the first person that claims it. You just pay shipping. Comment below and PM with your postal code so I can get a shipping quote.

_________________________________

4. Illuminated tailcap parts boxPhoto SOLD

Includes the rest of my 0805 and 0603 LED emitters, potentiometers, mini slide switches, Oshpark pcbs, and a bunch of resistors. Not pictured: clear silicone boot covers, more pcbs, and more resistors.

I’m not sure what this is worth. $15 + shipping?
__________________________________

5. The big parts boxPhoto Album SOLD

This is pretty much everything else. If you are only interested in a few things feel free to ask, but I would prefer to send it all together to keep it simple.

You will get:

  • Picture 1: Two-sided blue parts box / tackle box. Very nice with adjustable dividers. Note: only about half of what you will get fits in this organizer.
  • Picture 2: The contents of the blue parts box. A couple optics, some bare emitters, X6 triple mcpcb and aluminum heatsink, bare sinkpads, driver pcbs (my own designs mostly, published previously on BLF), silicone tailcap covers (black and green), a few sheets of DC Fix, plus more not pictured.
  • Picture 3: All of my driver parts including MCUs, FETs, Capacitors, Resistors, Diodes, etc. Much of it not even opened after delivery from Arrow. I think the picture shows all of the MCUs, but lots of other stuff not pictured.
  • Pictures 4 and 5: Random other parts including battery holders for test rigs, DIY battery chargers, clips, etc. A few others not pictured.
  • Picture 6: Illumination Machines LUM 5-90 reflector that Old-Lumens made famous. I aquired this a long time ago and never found a good host for it. Has been in a plastic container to protect it.

It’s a lot of stuff that will probably cost a fair bit to ship. $45 + free shipping in US?

My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03

Major Projects:  Illuminated Tailcap, TripleDown/TripleStack Driver

Edited by: pilotdog68 on 06/15/2018 - 17:42
djozz
djozz's picture
Offline
Last seen: 1 hour 27 min ago
Joined: 09/07/2012 - 17:04
Posts: 12725
Location: Amsterdam

Those are a lot of nice parts! I’m sure there wil be a few happy modders who can used it all very well!

link to djozz tests 

“I used to think that top environmental problems were biodiversity loss, ecosystem collapse and climate change. I thought that thirty years of good science could address these problems. I was wrong. The top environmental problems are selfishness, greed and apathy, and to deal with these we need a cultural and spiritual transformation. And we scientists don’t know how to do that.”   (Gus Speth)

BlueSwordM
BlueSwordM's picture
Offline
Last seen: 8 hours 4 min ago
Joined: 11/29/2017 - 12:34
Posts: 1214
Location: Canada

I would be really interested to know where you got the battery carriers.

Very nice stuff too.

Shipping kills it outside of the US though.

fonfan
Offline
Last seen: 1 week 5 days ago
Joined: 08/13/2015 - 19:44
Posts: 191
Location: RF SPb

Will take TM16 Project
+March C8

WANTED Zebralights. My flashlights

pilotdog68
pilotdog68's picture
Offline
Last seen: 3 weeks 5 days ago
Joined: 05/30/2013 - 23:31
Posts: 6418
Location: Held against my will in IOWA, USA

BlueSwordM wrote:
I would be really interested to know where you got the battery carriers.

Very nice stuff too.

Shipping kills it outside of the US though.


To be clear I am willing to ship to Canada (or other locations), but you’re right it certainly adds a fair bit of cost.

My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03

Major Projects:  Illuminated Tailcap, TripleDown/TripleStack Driver

BlueSwordM
BlueSwordM's picture
Offline
Last seen: 8 hours 4 min ago
Joined: 11/29/2017 - 12:34
Posts: 1214
Location: Canada

I know. But shipping adds a fair bit of cost, as you said.

mattlward
mattlward's picture
Offline
Last seen: 1 day 16 hours ago
Joined: 06/19/2015 - 09:20
Posts: 2318
Location: Illinois, USA

Oh… that big box looks yummy!

EDC rotation:
Convoy S2+, 6*7135, XM-L2 3D, 10 degree TIR, PilotDog lighted tailcap.
Convoy S2+, H17F, XM-L2 4C, lighted tailcap
Zebralight SC52w-L2
Olight S1A
Olight S1R

Swib
Offline
Last seen: 3 hours 6 min ago
Joined: 12/31/2015 - 19:21
Posts: 219
Location: Ontario, Canada

I’ll take the tailcap parts box. Number 4 on your list.

If you don’t like what it looks like on the wall, take it outside.

robo819
robo819's picture
Offline
Last seen: 7 hours 52 min ago
Joined: 03/10/2015 - 21:20
Posts: 1672
Location: Deep East TX

I will take the “Big Parts Box” #5
PM sent.

Click any link to see MY REVIEWS:

Maxtoch M24 Sniper / Maxtoch 2X Shooter (2016 factory dedomed) , 2X - XHP 70.2 / *** ### ThruNite // Archer 2A V3 / Ti4T / TN4A HI / TH10 / TH20 / C2 Mini / TC12 V2 / T01 / MCC-4S , neutron 2C V3 , TC20 / Catapult V6 / *** ###  Olight // H2R Nova , S10R III / S30R III / H1 Nova / H1 R Nova / X7 Marauder , PL Mini ,  M2R warrior //// Orca T11 / Nitecore EC20 / BLF A6 / Custom Convoy C8 / Lixada Triple 3800LM / Lixada 1000LM / LuxStone X30 / Manker E02 / Manker E14 II / Small Sun ZY-T43 / Warsun X60  //////// ### Thorfire /// PF03PF04 , Upgraded PF04 , C8 , S-50 ,  VG-10 , VG25 , C8s , BL30 , TK4A  , S1 , VG15 S  , TK 18 //// Atactical (Wowtac) // A1S , A1 (original) , A2 headlamp , A3 //// Acebeam L16 /// Massdrop (Lumintop) Brass EDC

pilotdog68
pilotdog68's picture
Offline
Last seen: 3 weeks 5 days ago
Joined: 05/30/2013 - 23:31
Posts: 6418
Location: Held against my will in IOWA, USA

Everything pending sale except #2

Added Courui

My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03

Major Projects:  Illuminated Tailcap, TripleDown/TripleStack Driver

CNCman
CNCman's picture
Offline
Last seen: 17 hours 6 min ago
Joined: 04/07/2018 - 10:10
Posts: 166
Location: Mississippi Gulf Coast

Wow, “ CRX “that made a big change in appearance, you can see the machining detail much better. Nice idea, I’m sure I’ve seen you in the “Enterprise” Engineering Room sometime ago. Beer

CNC & Manual Machinist. Think outside the box too long , cannot find your way back in.

Good Intentions are no guarantee for Good Results.

CRX
CRX's picture
Offline
Last seen: 2 weeks 14 hours ago
Joined: 04/02/2013 - 15:27
Posts: 2669
Location: Scotland

Too many tabs open CNCman? Big Smile

Nice sale PD Thumbs Up

pilotdog68
pilotdog68's picture
Offline
Last seen: 3 weeks 5 days ago
Joined: 05/30/2013 - 23:31
Posts: 6418
Location: Held against my will in IOWA, USA

Courui still available

My Favorite Modded Lights: X6R, S8 , X2R , M6, SP03

Major Projects:  Illuminated Tailcap, TripleDown/TripleStack Driver