ROT66 Strobe Modes

4 posts / 0 new
Last post
peg matite
peg matite's picture
Offline
Last seen: 1 week 8 hours ago
Joined: 01/02/2019 - 17:47
Posts: 121
Location: EOK
ROT66 Strobe Modes

Are all the ROT66 lights based on Anduril, or are some “just” Ramping IOSV3?

I want to try Lightning and Candle modes, but two clicks and a hold just is not working.

What is the best bargain light out there right now that has Anduril “stock”, and is available without ordering from China?

I know I can try to flash firmware and such, but answers to above would be appreciated.

Thanks

Lexel
Lexel's picture
Offline
Last seen: 6 hours 59 min ago
Joined: 11/01/2016 - 08:00
Posts: 5194
Location: Germany

the first were sold with NarsilM v1.2
also Aux board was added later

NarsilM
go 3 cliks battcheck from ON

Anduril
while 3 clicks from ON would change to stepped ramping
and battcheck only from Off

iamlucky13
Offline
Last seen: 2 hours 54 min ago
Joined: 06/22/2018 - 09:18
Posts: 517
Location: USA

As Lexel noted, for the first several months it was available, the ROT66 was shipping with NarsilM.

In Anduril, I think the strobes, like battery check mode, are only accessible from off.

Unfortunately, so far lights with Anduril are only available from Chinese sellers, as far as I’ve seen. The FW3A will hopefully start shipping in the next couple of months, and should be about $30. That will be the cheapest Anduril light I know of.

The Sofirn SP36 BLF edition has Anduril, and it looks like there are some coupons in the user negotiated deals subforum for $47.

I have seen a few posts in the Want to Sell subforum offering BLF Q8’s that have been modified with Anduril.

peg matite
peg matite's picture
Offline
Last seen: 1 week 8 hours ago
Joined: 01/02/2019 - 17:47
Posts: 121
Location: EOK

Thanks for the information.