3000lumens Everyday Carry Copper Flashlight 1 x 18650 Released

30 posts / 0 new
Last post
ACEBEAM
ACEBEAM's picture
Offline
Last seen: 1 month 6 days ago
Joined: 11/04/2016 - 05:12
Posts: 108
Location: China
3000lumens Everyday Carry Copper Flashlight 1 x 18650 Released

The versatile ACEBEAM TK18 is a full-featured general purpose flashlight for EDC, military and law-enforcement. There is a selection of 3 different LEDs (SAMSUNG LH351D / OSRAM KW CSLNM1.TG / NICHIA 219C). 5 different brightness levels and Strobe are controlled using an integrated and intelligent tail switch. Being powered by the equipped ACEBEAM ARC18650H-310A high drain rechargeable battery, both POWER and ECO mode can be activated. It has ECO mode when running on two CR123A 1600mAh battery. A TIR optimized lens helps soften and focus that impeccable light into a focused beam. Double directional gold plated pocket clip and compact size make it easy to carry around on your pocket. Ergonomic knurling on the canister makes it easy to grip comfortably in the palm of your hand with no strain or cramping even over long periods of time.

Click and View more specifications: http://www.acebeam.com/tk18

sales@acebeam.com
Outdoor Illumination Expert
www.acebeam.com

vit55
Offline
Last seen: 2 weeks 3 days ago
Joined: 07/04/2018 - 06:06
Posts: 139
Location: Italy

Beautiful PM for discount thx

Nicolicous
Nicolicous's picture
Offline
Last seen: 5 hours 52 min ago
Joined: 04/16/2016 - 08:28
Posts: 1505
Location: Australia

Beaaaauuuuutiful

most of us unlikely to afford it Smile

Nico -.-

Henk4U2
Henk4U2's picture
Online
Last seen: 2 min 35 sec ago
Joined: 02/13/2014 - 17:52
Posts: 3163
Location: The heart of the Netherlands (GMT+1)

Well, a full-featured general purpose copper flashlight for military and law-enforcement would certainly add some human-like aspects to those agencies, but I doubt if the procurement departments would go for it.

But hey, it sure is a VERY PURDY light! If I were a LEO, I would not want a copper bezel ring, but something made out of SS or Ti. So I can smash in a (car)window. With a nice copper or gold color, of course.
And keep the very mild crenulation, so I can see if the light is on. When I put it head down on the table.

You are a flashaholic if you are forced to come out of the closet, to make room for more flashlights.

KawiBoy1428
KawiBoy1428's picture
Offline
Last seen: 5 hours 24 min ago
Joined: 04/11/2014 - 18:05
Posts: 3971
Location: The Motor City

Real nice light. Thumbs Up

Will “not buy” premium lights with those crummy snap on clips… Facepalm

KB1428 “Live Life WOT

Redlyne22
Redlyne22's picture
Offline
Last seen: 17 hours 47 min ago
Joined: 12/25/2017 - 07:02
Posts: 194
Location: United States

Not a huge fan of EDC lights and I even think this looks great.

Sometimes being a newb is the best part of a hobbie

Henk4U2
Henk4U2's picture
Online
Last seen: 2 min 35 sec ago
Joined: 02/13/2014 - 17:52
Posts: 3163
Location: The heart of the Netherlands (GMT+1)

KawiBoy1428 wrote:
Real nice light. Thumbs Up

Will “not buy” premium lights with those crummy snap on clips… Facepalm

You’re right!

You are a flashaholic if you are forced to come out of the closet, to make room for more flashlights.

id30209
id30209's picture
Offline
Last seen: 40 min 40 sec ago
Joined: 05/17/2018 - 12:20
Posts: 782
Location: Croatia

Better looking than 16!!!

WTB  Jetbeam TCR1  &  Titanium 47 2xAA Quark

mortuus
mortuus's picture
Offline
Last seen: 13 hours 21 min ago
Joined: 12/16/2014 - 09:33
Posts: 2430
Location: Sweden

nice to see makers using LH351D emitters… looks like a cool light.

...where Frugal meets with Flashlight!

maukka
maukka's picture
Offline
Last seen: 1 day 2 hours ago
Joined: 12/31/2015 - 04:15
Posts: 2050
Location: Finland

LH351D, nice as long as it’s high CRI too. How long is the light?

edit: Size: 105mm (Length) x 25.5mm (Head Diameter) x 23mm (Tube Diameter)

id30209
id30209's picture
Offline
Last seen: 40 min 40 sec ago
Joined: 05/17/2018 - 12:20
Posts: 782
Location: Croatia

Yes^^^^^^
Shaved or dedomed 351D 5000K 90CRI would be spot on.

WTB  Jetbeam TCR1  &  Titanium 47 2xAA Quark

RapidLux
RapidLux's picture
Offline
Last seen: 20 hours 29 min ago
Joined: 03/24/2017 - 13:21
Posts: 370

Is the copper sealed, or will it fade?

KevinZA1988
KevinZA1988's picture
Offline
Last seen: 3 hours 34 min ago
Joined: 02/26/2018 - 02:26
Posts: 756
Location: South Africa

Interested.

Armytek Prime C1 Pro, Armytek Prime C2 Pro, Armytek Tiara C1 Pro, Astrolux MF01 Mini, BLF Q8, BLF A6, BLF FW1A, BLF FW3A, BLF FW3C, BLF LT1, Convoy L6, Convoy C8+ , Convoy S3, Convoy M21A, Convoy S11, Emisar D4, Fireflies E07, Jaxman E2L, Lumintop EDC18, Manta Ray C8.2 long version, Olight S1R Baton II special edition series, S2R Baton II, Nitecore HC65, Olight H1R Nova.

https://photos.app.goo.gl/JaJaDv4V838AEJf39

Rexlion
Offline
Last seen: 1 day 12 hours ago
Joined: 05/18/2019 - 16:59
Posts: 300
Location: Okla.

“…with no strain or cramping…”

If you can guarantee that for the female customers, you’ll sell a ton of these. Silly

KevinZA1988
KevinZA1988's picture
Offline
Last seen: 3 hours 34 min ago
Joined: 02/26/2018 - 02:26
Posts: 756
Location: South Africa

I guess the LH351D will be very floody…

Armytek Prime C1 Pro, Armytek Prime C2 Pro, Armytek Tiara C1 Pro, Astrolux MF01 Mini, BLF Q8, BLF A6, BLF FW1A, BLF FW3A, BLF FW3C, BLF LT1, Convoy L6, Convoy C8+ , Convoy S3, Convoy M21A, Convoy S11, Emisar D4, Fireflies E07, Jaxman E2L, Lumintop EDC18, Manta Ray C8.2 long version, Olight S1R Baton II special edition series, S2R Baton II, Nitecore HC65, Olight H1R Nova.

https://photos.app.goo.gl/JaJaDv4V838AEJf39

middle age man
Offline
Last seen: 3 hours 55 min ago
Joined: 03/26/2019 - 18:38
Posts: 109

Aluminum with copper head and the high CRI LH351D emitters for $55 would be nice. At the bottom of the page, it says the copper will oxidize over time.

Macka17
Offline
Last seen: 6 hours 35 min ago
Joined: 05/08/2017 - 02:31
Posts: 916
Location: Queensland Australia

Pretty ladies torch.
Very exxy for another skinny. NOT Tiny torch. Another fancy, shorter S2?.
Couldn’t hold it for long if it putting out 3000 lum. I’d think.
Burn your pinkies?..

I personally buy Copper ones cause I like the differing shades they give
AFTER they’ve weathered themselves.

Even the missus said no thank’s too fancy for me.
I’d be scared of marking it in my bag.

In a normal womans bag. Would you go in there and come out undamaged
Chuckle….
Di’s is Fancy Hand painted leather about a foot square, 6in thick. and ““I” CARRY it. Why??
“Cause it’s too heavy for me”. I’d hate to get hit with it.

toddcshoe
toddcshoe's picture
Offline
Last seen: 2 hours 23 min ago
Joined: 01/24/2018 - 23:49
Posts: 2121
Location: Foley, MO
RapidLux wrote:
Is the copper sealed, or will it fade?

If they put that protector stuff on it, you can remove it with some acetone, aka finger nail polish remover. If you like it shiny, don’t do that. Smile

Beautiful light. I’ll grab one for sure. Since I don’t buy a lot of lights now days I can afford a bit more pricey one once in a while.

"Everywhere I go, there I am"

toddcshoe
toddcshoe's picture
Offline
Last seen: 2 hours 23 min ago
Joined: 01/24/2018 - 23:49
Posts: 2121
Location: Foley, MO
KevinZA1988 wrote:
I guess the LH351D will be very floody…

It’s not terribly floody. I got one in convoy M1? M2? Can’t remember. It does pretty good. It’s not a xpl-hi or a sst-20 but it’s not a nichia either. Very pleasant tint around 5000k or so. Not sure what the tint of theirs is.

"Everywhere I go, there I am"

ZoomieFan
ZoomieFan's picture
Offline
Last seen: 1 day 19 hours ago
Joined: 08/19/2016 - 05:25
Posts: 541
Location: Netherlands & Indiana
RapidLux wrote:
Is the copper sealed, or will it fade?
Quote:
Note: The pure copper will change color slowly because of oxidation when exposing in the air. The color will show much difference by frequently play according to the using environment

Sounds like it’s not (100%) sealed.

Chargers: 1xBasen BD01 5/5, 1x Gyrfalcon All-88, LiitoKala: 3x100 4/5, 2x202 4/5, 1x402 3/5., MiBoxer C4-12 3/5.
Flashlights: DQG Tiny III 26650 5/5, FiTorch MR35 3/5, Haikelite SC26 HD 3/5, Lumintop Tool AA/AAA 4/5, Nitecore LA10, Sofirn C01 BLF 3200k/5600k, Zebralight H600Fc 3/5.
Powerbanks: EasyAcc 26800 mAh 3/5, Xtar PB2 4/5, Xtar PB2S 5/5
Waiting for: (DQG Tiny) 21700 EDCs.

id30209
id30209's picture
Offline
Last seen: 40 min 40 sec ago
Joined: 05/17/2018 - 12:20
Posts: 782
Location: Croatia

Just got an answer from Acebeam, Samsung is 6500K…

WTB  Jetbeam TCR1  &  Titanium 47 2xAA Quark

hasddie293
hasddie293's picture
Offline
Last seen: 1 day 4 hours ago
Joined: 03/05/2019 - 08:53
Posts: 250
Location: Brunei

I’m interested in samsung LH35D1, is that even category within high cri +95 specs ??

In search of the most ideal flashlight in town:
1. BRIGHTNESS
2. Durabillity
3. Design
4. Quality
5. Price$$$

djozz
djozz's picture
Offline
Last seen: 9 hours 9 min ago
Joined: 09/07/2012 - 17:04
Posts: 16541
Location: Amsterdam
toddcshoe wrote:
KevinZA1988 wrote:
I guess the LH351D will be very floody…

It’s not terribly floody. I got one in convoy M1? M2? Can’t remember. It does pretty good. It’s not a xpl-hi or a sst-20 but it’s not a nichia either. Very pleasant tint around 5000k or so. Not sure what the tint of theirs is.


I have this led in my Folomov 18650S (very comparable design) and it is perfect as my bike light:good directional light to see where you are going, while not too spotty so you can see the full width of the road/track.
djozz
djozz's picture
Offline
Last seen: 9 hours 9 min ago
Joined: 09/07/2012 - 17:04
Posts: 16541
Location: Amsterdam

6500K 70 CRI is not pretty but it makes for a much cooler running light compared to 90 CRI at 3000 lumen.

MascaratumB
MascaratumB's picture
Offline
Last seen: 4 hours 14 min ago
Joined: 10/29/2016 - 12:12
Posts: 4466
Location: Portugal

ACEBEAM, will you make an aluminum version like the TK16?

Also, I agree with the pocket clips. A better one to allow deep carry would be preferable! They look great, but they don’t work “that” great…

Thanks in advance for your answers!

[REVIEWS] ACEBEAM: H20 / TK16 /// AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 /// BLITZWOLF: BW-ET1 /// BRINYTE: T28 /// DQG: AA Slim Ti /// FIREFLIES: ROT66 GEN II /// HC-LIGHTS: SS AAA /// KLARUS: XT1C /// LIVARNOLUX: 314791 /// LUMINTOP: Tool AA V2.0 + Tool 25 /// NITEFOX: UT20 / ES10K / K3 /// ODEPRO: KL52 / B108 /// OLIGHT: M2R Warrior /// ON THE ROAD: M1 / i3 / M3 Pro /// ROVYVON: A2 + A5R / E300S / A8 /// SKILHUNT: M150 /// SOFIRN: SF14 + SP10A / SP32A / SP10B /// WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 /// XTAR: PB2 Charger ///

Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 /// TIR Lenses: 1 / 2/// Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 ///// My Collection ///// My Review's Blog (PT)

OL Contest 2019

GIVEAWAY: 1 / 2

Lund1660
Offline
Last seen: 5 days 9 hours ago
Joined: 08/28/2015 - 04:51
Posts: 445

Interested pm for discount code!

BurningPlayd0h
BurningPlayd0h's picture
Offline
Last seen: 2 hours 40 min ago
Joined: 06/22/2018 - 02:16
Posts: 938
Location: MN

Whyyyy go with the LH351D if you’re only going to offer it in CW/standard CRI????

At that point X-PL HI blows it away in almost every category most of us care about.

aginthelaw
aginthelaw's picture
Offline
Last seen: 3 hours 50 min ago
Joined: 09/30/2014 - 21:31
Posts: 925
Location: noo joisey

Nobody liked my hair when i dyed it blonde. So one of my coworkers bet me $50 at lineup that I wouldn’t go thru my shift with my hair dyed blue. I grabbed my patrol car, went to the beauty supply store, grabbed some spray on dye and voila! Blue hair. My lieutenant got wind of it called me into hq, and said take the dye out of my hair or I’ll be suspended. I told him if his seargeant can wear red & blond braids in her hair on duty, then i can wear my regulation length hair blue. I can only imagine his face if I showed up with this flashlight and my pink handcuffs. I do think it would go better with camo

never fear shadows…it means a light shines nearby

Mr. Nobody
Mr. Nobody's picture
Offline
Last seen: 3 weeks 1 day ago
Joined: 12/17/2014 - 22:46
Posts: 596
Location: Simi valley CA

Can the bezel be removed to add a glow disc like the fw3a by lumintop?

MascaratumB
MascaratumB's picture
Offline
Last seen: 4 hours 14 min ago
Joined: 10/29/2016 - 12:12
Posts: 4466
Location: Portugal

Mr. Nobody wrote:
Can the bezel be removed to add a glow disc like the fw3a by lumintop?

If it is like the TK16, the bezel can be removed and add that glow disc! I did it in my TK16. If I remember right, I had to file the GITD gasket on mine due to the 2 screws that stop the MCPCB from rotating. They are a bit “tall”…

[REVIEWS] ACEBEAM: H20 / TK16 /// AMUTORCH: S3 / S3 vs 219c / AM30 / AX1 / VG10 /// BLITZWOLF: BW-ET1 /// BRINYTE: T28 /// DQG: AA Slim Ti /// FIREFLIES: ROT66 GEN II /// HC-LIGHTS: SS AAA /// KLARUS: XT1C /// LIVARNOLUX: 314791 /// LUMINTOP: Tool AA V2.0 + Tool 25 /// NITEFOX: UT20 / ES10K / K3 /// ODEPRO: KL52 / B108 /// OLIGHT: M2R Warrior /// ON THE ROAD: M1 / i3 / M3 Pro /// ROVYVON: A2 + A5R / E300S / A8 /// SKILHUNT: M150 /// SOFIRN: SF14 + SP10A / SP32A / SP10B /// WUBEN: TO10R / E05 / T70 / E10 / TO50R / E19 /// XTAR: PB2 Charger ///

Tricks: 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 /// TIR Lenses: 1 / 2/// Others: Biscotti 3 + 1*7135 / Triple TIR w/ XP-G2 ///// My Collection ///// My Review's Blog (PT)

OL Contest 2019

GIVEAWAY: 1 / 2