Zebralight SC700D and Molicel 21700 P42A 4200mAh 45A Battery compatibility.

4 posts / 0 new
Last post
sovereignknight
sovereignknight's picture
Offline
Last seen: 4 days 9 hours ago
Joined: 01/18/2016 - 23:44
Posts: 516
Location: Northern California
Zebralight SC700D and Molicel 21700 P42A 4200mAh 45A Battery compatibility.

It works. Still rattles but far less than a Samsung 40T.


https://en.wikipedia.org/wiki/John_3:16 

Flashlights:

x2 Sk68 modded 1 Nichia 319AT, 1 Cree XP-G3 - x1 Solorforce P60 drop in custom XM-L2 U4 1C, Qlight Rev.A 7135*8 3.04A Driver - x2 Lumintop EDC05 CW - x2 Jaxman E2L tripple XP-G2 S4 
x1 Jaxman Z1 Zoomie, w/ Cree MT-G2 Q0 LED - x1 Acebeam K40m thrower with MT-G2 Q0 LED - x1 Xintd SC-82 V5 Limited Edition C8, XM-L2 U4 1C, Qlight Rev.A 7135*8 3.04A Driver
x1 Convoy L6 moded with a Cree XHP-70.2 P2 1D LED - x1 Rare Olight x7 Maurauder with a Nuetral White LED - x1 Astrolux MF-01 Nichia 219c - x1 Astrolux MF-01 Cree XP-G3 - x2 Zebralight SC5w MKII  

x2 Lumintop Tool AA - x1  x2 Lumintop Tool AA 2.0 - x1 Lumintop ODL20C - x1 Lumintop GT mini - x1 Olight i3E EOS - x2 Zebralight SC600w Plus MK IV XHP 50.2 4500k 80 CRI - x1 Fenix CL30R - x1 Lumintop C01 Bike Light - x1 Lumintop Zoom 1 - x2 Zebralight Sc700d - x2 Lumintop Tool AA 2.0 Ti - x1 Olight I3T EOS

will34
will34's picture
Offline
Last seen: 13 hours 58 min ago
Joined: 12/18/2012 - 00:12
Posts: 3891

I double wrapped my 50E and there is still plenty room left in the tube. Don’t know why they made it so wide.

goshdogit
goshdogit's picture
Offline
Last seen: 3 hours 44 min ago
Joined: 12/03/2015 - 21:28
Posts: 1134

I use a Samsung 50E in mine, too. I like the benefit of a few extra mAh.

A couple wraps of masking tape at the ends eliminated battery rattle.

sovereignknight
sovereignknight's picture
Offline
Last seen: 4 days 9 hours ago
Joined: 01/18/2016 - 23:44
Posts: 516
Location: Northern California

I did the double wrap with the 40T. The issue though was that the double wrap would interfere with the positive contact for charging the cell. Had to use a magnet as a makeshift nub to make contact on the charger’s positive contact.

I think a single wrap on the Molicel will fix the rattle, or doing the suggested tape wrap.

Overall I think I’m going to use the 40T in something else and keep the Molicel for the 700D.

I don’t use the 50E as I don’t want to put solder blobs on the positive contact.

https://en.wikipedia.org/wiki/John_3:16 

Flashlights:

x2 Sk68 modded 1 Nichia 319AT, 1 Cree XP-G3 - x1 Solorforce P60 drop in custom XM-L2 U4 1C, Qlight Rev.A 7135*8 3.04A Driver - x2 Lumintop EDC05 CW - x2 Jaxman E2L tripple XP-G2 S4 
x1 Jaxman Z1 Zoomie, w/ Cree MT-G2 Q0 LED - x1 Acebeam K40m thrower with MT-G2 Q0 LED - x1 Xintd SC-82 V5 Limited Edition C8, XM-L2 U4 1C, Qlight Rev.A 7135*8 3.04A Driver
x1 Convoy L6 moded with a Cree XHP-70.2 P2 1D LED - x1 Rare Olight x7 Maurauder with a Nuetral White LED - x1 Astrolux MF-01 Nichia 219c - x1 Astrolux MF-01 Cree XP-G3 - x2 Zebralight SC5w MKII  

x2 Lumintop Tool AA - x1  x2 Lumintop Tool AA 2.0 - x1 Lumintop ODL20C - x1 Lumintop GT mini - x1 Olight i3E EOS - x2 Zebralight SC600w Plus MK IV XHP 50.2 4500k 80 CRI - x1 Fenix CL30R - x1 Lumintop C01 Bike Light - x1 Lumintop Zoom 1 - x2 Zebralight Sc700d - x2 Lumintop Tool AA 2.0 Ti - x1 Olight I3T EOS