Is there a Chinese seller which has Rough Rider knifes.
I found only an US seller with a big selection.
Are any opinions about that brand?
Joe
Is there a Chinese seller which has Rough Rider knifes.
I found only an US seller with a big selection.
Are any opinions about that brand?
Joe
Thank you very much, sir. :+1:
But the prices are worst than Italy…But there are some good knives to choose, for sure!
I give you all another web address, is in France, there are a lot of brands which some very good prices. Here you are: knives seller in france with free shipping!
Hi Joe, smkw.com is the main productor of Rough Rider knives! But now they do not send/sell knives anymore outside USA
In Europe you can find some good choise in the address I have posted, but for a lot of reason, if you see a knife at smkw.com at 10$ you can be sure that here in Europe you will find the same knife at 20 euro…
If you find some good, please tell me, thank.
Got a Byrd Tern clone today, seems tiny in the hand compared to the UKPK, but it should still be a nice addition to the daily rotation.
The ‘lock’ is decent, with a very strong stop at 90°.
Blade centering is good, very little play in the blade. Haven’t taken it apart (yet), but it appears to have bronze washers.
As with a few of the Chinese knives I’ve gotten, the edge centering is awful…going to have to spend some time evening it up:
Size comparison:
(UKPK copy (G10), real UKPK (FRN), modified Ganzo F759M, Tern clone)
[quote=Manx]
I too can recommand thebestknives.eu/.fr (ordered a dozen knives from them without problems, never used after sales services though). They do free shipping for domestic orders, don’t know shipping price for other countries, though.
Does anyone know of a cheap Damascus steel pocket knife? Would like to to be less than 30-40$ preferably. I don’t even know if they exist.
Check out Boker knives, they have quite a range of modestly priced knives with folded steel blades.
Sorry then and thank you for the link
I too can recommand thebestknives.eu/.fr (ordered a dozen knives from them without problems, never used after sales services though). They do free shipping for domestic orders, don’t know shipping price for other countries, though.
Thank you! Yes you are right: free shipping is only for France, no other countries. :+1:
Probably I will buy a coupple of knife from them, stay tuned!
Sorry then and thank you for the link
No problem, thank you for the suggestion
Can you guys recommend a knife for carving poplar?
Maybe not that much budget, but here’s my review of the HX outdoor ZD005:
Hello guys, I lately discovered the HX OUTDOOR brand through Gearbest, first i was a bit skeptical by the survival/mall ninja pictures: [image] but material( carbon fiber, titanium) and lines ( tanto blade) were quite interesting. Knife comes in a very nice pouch, and as soon as i handled it, i felt like a Navy Seal ( ): [image] Beside, the knife is quite small with an unfold length at 17,5cm, not so ninja oriented but perfect for everyday carry. [image] Like the Lionsteel TRE ( T…
Comments are welcome.
Can you guys recommend a knife for carving poplar?
Poplar is a wonderful carving wood and I’d probably go for a Mora wood carving knife maybe like this:
Check out the different blades shapes and sizes with a scandi grind at Ragweed Forge
I took a very small Mora blade blank and crafted a handle for it. I use it mostly as a marking knife for woodworking but it is superb for carving when I need it.
Not a bad little knife from Amazon for £13, Lifetime Guarantee, Will Not Rust, Yeah Right.
https://www.amazon.co.uk/gp/product/B0046RDZLY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
https://i.imgur.com/sIDw259.jpg
John.
I’ve finished my review about the Spyderco C192 PITS copy.
After the Positron this is another excellent deal from the budget category:
Does anyone know of a cheap Damascus steel pocket knife? Would like to to be less than 30-40$ preferably. I don’t even know if they exist.
Have a look on Aliexpress.
Spyderco Des Horn clone .
https://www.aliexpress.com/item/58-60HRC-key-chain-knife-D2-Stone-wash-or-Damascus-blade-Titanium-alloy-handle-Mini-pocket/32818395093.html?ws_ab_test=searchweb0_0,searchweb201602_3_10152_10065_10151_10130_5490020_10068_5470011_10139_10307_10137_10060_10155_10154_10056_10055_10054_10059_100031_10099_5460020_10338_10339_10103_10102_440_10052_10053_10107_10050_10142_10051_5380020_10326_10084_10083_10080_10082_10081_10178_10110_10111_10112_10113_10114_143_10312_10313_10314_10078_10079_10073_5550011-10102,searchweb201603_11,ppcSwitch_5&btsid=1fbb227f-8e7a-4c48-bc8c-698fe5cc8ab2&algo_expid=458e3f96-e721-4dac-ac00-6c1559d8e8c2-0&algo_pvid=458e3f96-e721-4dac-ac00-6c1559d8e8c2
SpydieChef clone
https://www.aliexpress.com/item/D2-or-Damascus-blade-Titanium-alloy-handle-pocket-folding-knife-58-60HRC-survival-tactical-knife-outdoor/32817876631.html?spm=a2g0s.8937460.0.0.48I1Cm
Does anyone know of a cheap Damascus steel pocket knife? Would like to to be less than 30-40$ preferably. I don’t even know if they exist.
Maybe also the Enlan EL01D or EL02D, currently at Gearbest for 37.22 respectively 26.75 $$, are worth to take a look at.
Spyderco Des Horn clone .
SpydieChef clone
Here’s a smaller/cheaper key chain knife
It’s not damascus STEEL, it’s only an acid etching pattern, a decoration.
Do you have one?
According to at least one review of the Des Horn, it’s real Damascus.
I don’t have one so can’t say for sure but I am believe that it’s doable in China in the $40 price range, so I would think it is folded steel.
At the same time, the Enlan EL01 as suggested above by Mac is also a good alternative.
If you look the reviews on Fasttech, there is a review by 8steve88 that confirms it is folded steel.
8steve88 is very well regarded both on the fasttech and on this forum so I believe him.
That shows again that damascus can be had below $40.
leaftye:Can you guys recommend a knife for carving poplar?
Poplar is a wonderful carving wood and I’d probably go for a Mora wood carving knife maybe like this:
Check out the different blades shapes and sizes with a scandi grind at Ragweed Forge
I took a very small Mora blade blank and crafted a handle for it. I use it mostly as a marking knife for woodworking but it is superb for carving when I need it.
I didn’t even realize that’s what I was cutting last weekend because I was cutting burned trees, but I realized it was something special by how smoothly it would saw. Unfortunately I took too long to order, so I’ll have to see about getting one for the following weekend.
Do you have one?
According to at least one review of the Des Horn, it’s real Damascus.
I don’t have one so can’t say for sure but I am believe that it’s doable in China in the $40 price range, so I would think it is folded steel.At the same time, the Enlan EL01 as suggested above by Mac is also a good alternative.
If you look the reviews on Fasttech, there is a review by 8steve88 that confirms it is folded steel.
8steve88 is very well regarded both on the fasttech and on this forum so I believe him.
That shows again that damascus can be had below $40.
I’ll try that. I saw a couple of reviews on youtube stating that they are acid etched. That’s why it’s hard.