Andrúil halfway ramping flash mystery

[jon_slider]

I have iMac and iPhone, have not found any FWAA flashing videos

there seems to be a mystery about what firmware the FWAA uses

[Oli]

@Asian8640

Anduril has a flash when the driver changes channels from a single 7135 linear current regulator to a second channel with 7 for higher output. The flash is intentional for those that just want to run off the maximum output of a 7135. There should be a second flash when it reaches the maximum selected output on normal ramping.

Yes it was put in intentionally to give people more information. Information is a good thing.

[Tom_E]

@SammysHP

Blink at ramp middle can be disabled at compile time. Long time ago I made a patch that added a short delay at the blink so that you can reach the threshold exactly. With the global config menu we can think about making this a runtime option. The switch brightness indicates the same threshold, but not every flashlight has an illuminated switch. The 7135 channel is enabled in the FET region as well. Only full FET comes without 7135.

Yes - the main LED blinks and the switch LED is low on the the low channel, high on the high channel -- not sure how it works on 3 channels lights.

That's a great idea btw! To pause, allowing us to stop at the most efficient setting available with no PWM, but still get full smooth ramping. I like it!! But yes, some will find it even more annoying...