Looks like about what we should be expecting in the GB, can’t wait. Great pictures, especially with the different tints. Although the pictures may misrepresent the colors, it shows how a high CRI light can make colors pop more.
I prefer the tailcap as is for easy access. Instead, a future titanium version should include a tail-standing tailcap like their current aluminum Tools.
Is the tail stander a twisty or clicky?
twist, hence good for copper, not good for titanium
I believe it also has a magnet
and it has the maratac style wire ring for keychain
Olight keyring attachment point works better imo
Also the Tool Clickie keyring option seems to rub on the rubber switchcap, bears improvement somehow
found a pic on an N219 betwixt and between cool and warm LEDs:
Really looking forward to the new ReyLight CU Tool with LMH modes, NoPwm, and N219…
uh, how about some trits in the tailcap ears?
Just pay attention to our website or our updates :evil: And feel free to put any of your suggestion here and we may adopt it and improved in your next light 
So now I bought the near-perfect Rey-version copper Tool, and then in the coming months the tail-standing Tool comes out.
It is cruel...
since the twist-the-head is already possible you just need Abbie to convince to do a run on switchless tailcaps in copper…
You have a point there: thanks to the light being all copper, it can be DIY'ed too using old-school plumbing: grind the lanyard 'ears' off the tail, remove the switch, and using a small blow torch, solder a small copper round in with a (fairly long) spring on top.
or buy the Maratac
Great light! Already own a stock copper, want to pick up the almost perfect ReyLight version soon.
good option, but it would not be a tailstanding clickie
another possible way to get to a tailstanding clickie Tool is to homebrew a taller copper collar from a bit of pipe, that could be sized to slip between the ears and the rubber cap, and attached in a temporary way with glue. The collar could also be made in 2 sections, to stick up like the ears.
The Maratac does not tailstand stably, with the stock clip in cap position,
requires trimming the clip tip:
otoh, the magnetic twist cap for the tool is tall enough for the pocket clip not to interfere with tailstanding. I would like that tailcap option in copper, but again, its not a tailstanding clickie solution.
Maybe the Clicky can be shortened and a shorter boot?
Lumintop website shows Copper Tool is for sale.
Should we expect it to show up on Amazon this week or next month?
Yes, It will show up on Amazon soon J)
Do you have any plan to release Lumintop Worm on copper too?
That would be awesome. :heart_eyes:
Well, I Suppose So… 
It is time to buy the Chrismast Gift :party:
Now, 2 days later, it is on Amazon in the N219, No PWM, MLH, 18-3-80 lumen sequence. No Firefly, no tailstand. Read the post above for a 20% discount code.
And you can get in on the Rey Light group buy that is supposed to have LMH 1-18-80 modes with the N219, No PWM, no tailstand.
And there is a Titanium version planned, that “might” tailstand. As the Lumintop poster said:
And if you want a really bright version, with LiIon, you can get the custom driver equipped ToolVN
So 4, count em, 4 different ways to spend your money on Tools 
or:
get ´em all
Of Course! What was I thinking?
Edited my post to And, not Or
you remind me of the Old Bull, Young Bull story:
Old Bull and Young Bull standing on a hill.
Young Bull says, hey look at all those Cows! Lets Run down there and get One.
Old Bull says, Lets Walk down there and get them All.
good one!
Reminds me of a story I once heard.
.
Ima eat every f*ing chicken in this room.