Brinyte B158 - Strip, Polished, Dedome XP-G2 S4 2B, FET+7135 MTN-17DDm-New Updated Version.
Man that tailcap is gorgeous…. I just couldn’t do that to my B158 though, the ano is already so nice. My favorite ano I think.
Seconded!
And I have no idea what’s “baking”, even.
tim70: Lfatman:
First cooked to 300 °C and then treated with sodium hydroxide using a sponge.Wow” the most beautiful bake I every seen! :+1:
Seconded!
And I have no idea what’s “baking”, even.
Baking anodizing can change the color of the dye used, usually works best on type I or II. You can either do it in an oven or with a torch but in either case you need to strip it down to metal parts only (no lens, switch, driver, o-rings, or anything else adversely affected by ~450F).
Baking anodizing can change the color of the dye used, usually works best on type I or II. You can either do it in an oven or with a torch but in either case you need to strip it down to metal parts only (no lens, switch, driver, o-rings, or anything else adversely affected by ~450F).
Hmm, kewl!
Any way to tell beforehand what the change would be? Is it usually from black to tan? Reminds me of Cerakote, which’d be pretty awesome.
Rufusbduck:Baking anodizing can change the color of the dye used, usually works best on type I or II. You can either do it in an oven or with a torch but in either case you need to strip it down to metal parts only (no lens, switch, driver, o-rings, or anything else adversely affected by ~450F).
Hmm, kewl!
Any way to tell beforehand what the change would be? Is it usually from black to tan? Reminds me of Cerakote, which’d be pretty awesome.
Kind of a gamble on what will result. Some lights do not get changed to the same color on all parts. I did a S2 Hard Oxygen glossy black and it was awful. Ended up getting stripped and polished. Tried another S2+ in blue and it had all Crackle looking bezel and off color parts. The M2 Convoy in glossy turned out well, pics above.
The M2 Convoy in glossy turned out well, pics above.
Ooh, that’s a nice one, too! Great color…
Some other examples…
Some other examples…
look good! :+1:
Some amazing lights here
Dont have too many to offer, here are a few
Heat treated ti
Pocket rocket , polished ti
s2 stripped
a6 bare with black a6 shorty body
cu cryos bezel on a stainless L2T
x40 ano stripped
Dark ti heat treated seraph
Rainbow flavoured PK
Stone wash ti
Just polished cu prince
Cheers
Some amazing lights here
Dont have too many to offer, here are a few
Heat treated ti
Pocket rocket , polished ti
s2 stripped
a6 bare with black a6 shorty body
cu cryos bezel on a stainless L2T
x40 ano stripped
Dark ti heat treated seraph
Rainbow flavoured PK
Stone wash ti
Just polished cu prince
Cheers
wow’ they all good looking light! I like the one wear on the neck better.
Thanks!
Thats my daughters little light, gift from vinh . I have a cooyoo quantum 10180 on my car keys which i like in stainless .Good metal for lights that come into contact with other metals. My TOOL lasted a few months before most of the ano had been removed……………
Very cool lights ven, Good to see you here.
the X40 gave me a BIG smile when I saw it.
Have a copper prince ordered that was under $40 from GB. Almost a week and still not shipped.
Solar Force L2—A001— S9
Thanks VW :+1:
Now you know i love that light chops can not find one for love nor money :smiling_imp:
This is not New Clear Convoy C8, the black one. Strip, polished the whole light.
Dedome XP-L V6 OD with FET+7135 MTN-17DDm.
:+1: Very NICE! It’s a shame they had to put those Flats on the battery tube, a full round tube…… man that would be way cool
:+1: Very NICE! It’s a shame they had to put those Flats on the battery tube, a full round tube…… man that would be way cool
thank KawiBoy1428!
Eagle eye x6 triple
This is 5$ Ultrafire, moded with XP G2, and deep reflector,whole built for 9$